Abstract
End-effector tools with low weight, multiple degrees of freedom have significant application significance. At present, motor-driven robot operating tools generally have more complicated transmission systems as well as actuators, and the weight is also heavy. In this paper, a bolt-screwing tool based on a pneumatic slip ring structure is designed, which can realize two-DOF motion of clamping-releasing and rotating. The tool consists of a pneumatic slip ring with sealed structure and a cylinder driven gripper. This article also introduces the control strategy required to screw the bolt, and describes the configuration of the experiment. Finally, the bolt is screwed into the thread hole in the experiment to verify the reliability of the screw assembly tool and the effectiveness of the corresponding control scheme.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Roberts, B.: Using the international space station as a precursor to in-orbit robotic servicing. In: AIAA Space Conference and Exposition (2010). https://doi.org/10.2514/6.2010-8898
Spinler, A.B.: ISS operations for the special purpose dexterous manipulator (SPDM) experiences from the robotic systems evaluation laboratory (RSEL). In: AIAA Annual Technical Symposium (1999)
Lopes, A., Almeida, F.: A force-impedance controlled industrial robot using an active robotic auxiliary device. Robot. Comput. Integr. Manuf. 24(3), 299–309 (2008). https://doi.org/10.1016/j.rcim.2007.04.002
Liu, C.H., Chen, C.C.A., Huang, J.S.: The polishing of molds and dies using a compliance tool holder mechanism. J. Mater. Process. Technol. 166(2), 230–236 (2005). https://doi.org/10.1016/j.jmatprotec.2004.08.021
Ryuh, B.S., Park, S.M., Pennock, G.R.: An automatic tool changer and integrated software for a robotic die polishing station. Mech. Mach. Theory 41(4), 415–432 (1999). https://doi.org/10.1016/j.mechmachtheory.2005.06.004
Liao, L., Xi, F., Liu, K.: Modeling and control of automated polishing/ deburring process using a dual-purpose compliant toolhead. Int. J. Mach. Tools Manuf. 48(12–13), 1454–1463 (2008). https://doi.org/10.1016/j.ijmachtools.2008.04.009
Ahn, J.H., Lee, M.C., Jeong, H.D.: Intelligently automated polishing for high quality surface formation of sculptured die. J. Mater. Process. Technol. 130(02), 339–344 (2002). https://doi.org/10.1016/S0924-0136(02)00821-X
Acknowledgement
This work was supported by the National Natural Science Foundation of China under grant 91848202, and the project was supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (Grant No. 51521003).
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Zhang, Q., Xie, Z., Liu, Y., Liu, H. (2019). Development of Bolt Screwing Tool Based on Pneumatic Slip Ring. In: Yu, H., Liu, J., Liu, L., Ju, Z., Liu, Y., Zhou, D. (eds) Intelligent Robotics and Applications. ICIRA 2019. Lecture Notes in Computer Science(), vol 11740. Springer, Cham. https://doi.org/10.1007/978-3-030-27526-6_40
Download citation
DOI: https://doi.org/10.1007/978-3-030-27526-6_40
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27525-9
Online ISBN: 978-3-030-27526-6
eBook Packages: Computer ScienceComputer Science (R0)