Abstract
A piezo-actuated XY precision positioning stage with integrated piezoelectric displacement sensor is developed. The displacement sensing is realized by bonding a semi-rectangular shaped polyvinylidene fluoride (PVDF) film on the surface of the guiding flexible beam. The measuring principle is based on the simple kinematic relationship and the ‘clamped-sliding’ boundary condition of the guiding flexible beam, both of which are widely available in compliant mechanisms. The sensing concept is experimentally verified with high precision and sensitivity, resulting in a comparative precision with the commercial optical displacement meter but with smaller waveform distortion at high frequencies. The presented precision positioning stage is measured with a maximum stroke range of 138 μm × 138 μm. The feature of the sensing method lies in its very compactness with high precision, fast frequency response, low cost, fine resolution and simplicity, thus opening up interesting opportunities for volume displacement measuring of precision positioning stages or other flexible manipulators with confined interspaces and harsh environments where integrating a bulky transducer is hard.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Chen, F., Liu, L., Li, Q., et al.: Experimental and theoretical analysis of a smart transmission mechanism system. Smart Mater. Struct. 27(9), 095022 (2018)
Wei, H., Shirinzadeh, B., Li, W., et al.: Development of piezo-driven compliant bridge mechanisms: General analytical equations and optimization of displacement amplification. Micromachines 8(8), 238 (2017)
Clark, L., Shirinzadeh, B., Bhagat, U., et al.: Development and control of a two DOF linear–angular precision positioning stage. Mechatronics 32, 34–43 (2015)
Shen, Y., Xi, N., Lai, K.W.C., et al.: A novel PVDF microforce/force rate sensor for practical applications in micromanipulation. Sens. Rev. 24(3), 274–283 (2004)
Shapiro, Y., Kósa, G., Wolf, A.: Shape tracking of planar hyper-flexible beams via embedded PVDF deflection sensors. IEEE/ASME Trans. Mechatron. 19(4), 1260–1267 (2014)
Choi, S., Jiang, Z.: A novel wearable sensor device with conductive fabric and PVDF film for monitoring cardiorespiratory signals. Sens. Actuators A Phys. 128(2), 317–326 (2006)
Lee, C.K., Moon, F.C.: Modal sensors/actuators. J. Appl. Mech. 57(2), 434–441 (1990)
Ling, M.X., Cao, J.Y., Zhuang, J., et al.: Design, pseudo-static model and PVDF-based motion sensing of a piezo-actuated XYZ flexure manipulator. IEEE/ASME Trans. Mechatron. 23(6), 2837–2848 (2018)
Ling, M.X., Cao, J.Y., Jiang, Z., et al.: Modular kinematics and statics modeling for precision positioning stage. Mech. Mach. Theory 107, 274–282 (2017)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Ling, M. (2019). A Flexure-Based XY Precision Positioning Stage with Integrated Displacement PVDF Sensor. In: Yu, H., Liu, J., Liu, L., Ju, Z., Liu, Y., Zhou, D. (eds) Intelligent Robotics and Applications. ICIRA 2019. Lecture Notes in Computer Science(), vol 11740. Springer, Cham. https://doi.org/10.1007/978-3-030-27526-6_25
Download citation
DOI: https://doi.org/10.1007/978-3-030-27526-6_25
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27525-9
Online ISBN: 978-3-030-27526-6
eBook Packages: Computer ScienceComputer Science (R0)