Abstract
The purpose of this paper is to introduce the validation of casting simulation using actual casting test. Despite the fact that its keyword of casting simulation has risen from around 1970, in the basic design such as riser design of a cast product, many manufacturers use an empirical approach. However, in order to survive international competition, it becomes more important to search for optimal values beyond experience, and simulation is also an important tool for exploring optimum casting condition. From the viewpoint of prevention of shrinkage defect using simulation, we investigated the physical property values for determining the simulation setting conditions, and validated the physical property calculation software J-mat Pro. Then, after conducting the casting test to perform the temperature verification in the case of using them, comparison of the predicted shrinkage prediction result of the cast solidification simulation result and the actual result was carried out.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Dantzig, J.A., Rappaz, M.: EPFL-Press (2009). ISBN: 978-08493-8238-3
Rappaz, M., Gandin, C.-A.: Acta Metal. Mater. 41, 345–360 (1993)
Gandin, C.-A., Rappaz, M.: Acta metal. Mater. 45, 2187–2195 (1997)
Olmedilla, A., Založnik, M., Rouat, B., Combeau, H.: Phys. Rev. 97 (2018)
Hardin, R.A., et al.: Int. J. Cast Metals Res. 28, 181–192 (2015)
Chvorinov, N.: Giesserei 27(10), 177, 201 (1940)
Caine, J.B.: Trans. A.F.S. 56, 497 (1948)
Adams, Talor, H.F.: Trans. A.F.S, 686–693 (1953)
Wlodawer, R.: Directional solidification of steel castings. Pergamon Press (1966)
Niyama, E.: Jpn. Foundry Eng. Soc. 72 12 (2000)
Ohnaka, I.: Introduction to computer heat transfer and solidification. ISBN: 4-621-02951-7C3057
Rappaz, M., Bellet, M., Deville, M.: Numerical modelling in materials science and engineering. ISBN: 3-540-42676-0
Henzel, J.G.: J. Keverian AFS Cast Metal. Res. J. 1, 19 (1965)
Niyama, E., Uchida, T., Morikawa, M., Saito, S.: AFS Int. Cast Met. J. 9, 52–63 (1982)
Carlson, K.D., Beckermann, C.: Metall. Trans. B 40A, 163–175 (2009)
Guo, J., Beckermann, C., Carlson, K., et al.: MCWASP, 012003 (2015)
Kubo, K., Pehlke, R.D.: Metall. Trans. B 16, 359–366 (1985)
Pequet, C., Gremaud, M., Rappaz, M.: Met. Mater. Trans. A 18, 1979–1987 (1987)
Hatta, I.: Saishinnetusokutei, AGNE. ISBN: 978-4-901496-09-4 C3043
Ishida, H., Yoshimoto, A., Kanzaki, Y.: Kobe Steel R&D 56(1), 29–31 (2006)
Takahashi, T., Kudo, M., Nagai, S.: Tetsu-to-hagane 68(6), 623–632 (1982)
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Kishimoto, A., Takagawa, Y., Saito, T. (2020). Prevention Technology of Shrinkage Using Actual Casting Test and Casting Simulation. In: Okada, H., Atluri, S. (eds) Computational and Experimental Simulations in Engineering. ICCES 2019. Mechanisms and Machine Science, vol 75. Springer, Cham. https://doi.org/10.1007/978-3-030-27053-7_70
Download citation
DOI: https://doi.org/10.1007/978-3-030-27053-7_70
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27052-0
Online ISBN: 978-3-030-27053-7
eBook Packages: EngineeringEngineering (R0)