Abstract
The paper is aimed at investigating the use of embedded smart concrete sensors for monitoring the strain in full-scale reinforced concrete beams. The new sensors are made of the same matrix material of the concrete elements to be monitored and can be easily embedded into structural components before casting, thus achieving a durable and distributed sensing solution for structural health monitoring purposes. The self-monitoring ability is obtained through the dispersion of nano-metric conductive carbon-based fillers which induce new piezoresistive properties. In this study, a set of smart concrete sensors was embedded on top of a simply supported reinforced concrete beam and the dynamic performance of the element was evaluated, by measuring the variation in electrical resistance of the smart concrete sensors and benchmarked against measurements carried out with traditional strain gauges. The results of such comparisons demonstrate that the new sensors are apt for strain monitoring in RC structural components.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
references
Azhari F, Banthia N (2012) Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing. Cem Concr Comp 34:866–873 (2012)
Camacho-Ballesta C, Zornoza E, Garcés P (2016) Performance of cement-based sensors with CNT for strain sensing. Adv Cem Res 28(4):274–284
Cao J, Chung DDL (2004) Electric polarization and depolarization in cement-based materials, studied by apparent electrical resistance measurement. Cem Concr Res 34:481–485
Coppola L, Buoso A, Corazza F (2011) Electrical properties of carbon nanotubes cement composites for monitoring stress conditions in concrete structures. Appl Mech Mater 82:118–123
D’Alessandro A, Ubertini F, García-Macías E, Castro-Triguero R, Downey A, Laflamme S, Meoni A, Materazzi AL (2017) Static and dynamic strain monitoring of reinforced concrete components through embedded carbon nanotube cement-based sensors. Shock and Vibration, Volume 2017, 3648403, 11 pages
Downey A, D’Alessandro A, Baquera M, García-Macías E, Rolfes D, Ubertini F, Laflamme S, Castro-Triguero R (2017) Damage detection, localization and quantification in conductive smart concrete structures using a resistor mesh model. Eng Struct 148:924–935
Han B, Ou J (2007) Embedded piezoresistive cement-based stress/strain sensors. Sensor Actuat A - Phys 138:294–298
Han B, Yu X, Ou J (2011). Multifunctional and smart nanotube reinforced cement-based materials. In: Gopalakrishnan K, Birgisson B, Taylor P, Attoh-Okine N (eds) Nanotechnology in civil infrastructure. A paradigm shift. Springer, pp 1–48
Li H, Xiao H, Ou J (2003) A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials. Cem Concr Res 34:435–438
Materazzi AL, Ubertini F, D’Alessandro A (2013) Carbon nanotube cement-based transducers for dynamic sensing of strain. Cem Conc Comp 37:2–11
Metaxa ZS, Konsta-Gdoutos MS, Shah SP (2009) Carbon nanotubes reinforced concrete, ACI Special Publication, 267SP, pp 11–20
Mondal P, Shah SP, Marks LD (2008) Nanoscale characterization of cementitious materials. ACI Mater J 105:174–179
Pisello AL, D’Alessandro A, Sambuco S, Rallini M, Ubertini F, Asdrubali F, Materazzi AL, Cotana F (2017) Multipurpose experimental characterization of smart nanocomposite cement-based materials for thermal-energy efficiency and strain-sensing capability. Sol Energy Mater Sol Cells 161:77–88
Rainieri C, Song Y, Fabbrocino G, Markand JS, Shanov V, (2013) CNT-cement based composites: Fabrication, self-sensing properties and prospective applications to structural health monitoring. In: Proceedings SPIE, fourth international conference on smart materials and nanotechnology in engineering 8793, p 10
Ubertini F, Laflamme S, D’Alessandro A (2016) Smart cement paste with carbon nanotubes. In: Loh KJ, Nagarajaiah S (eds) Innovative developments of advanced multifunctional nanocomposites in civil and structural engineering. Woodhead Publishing, pp 97–120
Acknowledgements
This project has received funding from the European Union’s Framework Programme for Research and Innovation HORIZON 2020 under Grant Agreement No. 765057. The support of the Italian Ministry of Education, University and Research (MIUR) through the funded Project of Relevant National Interest “SMART-BRICK: Novel strain-sensing nanocomposite clay brick enabling self-monitoring masonry structures” is also gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
D’Alessandro, A., Meoni, A., Ubertini, F., Luigi Materazzi, A. (2020). Strain Measurement in a Reinforced Concrete Beam Using Embedded Smart Concrete Sensors. In: di Prisco, M., Menegotto, M. (eds) Proceedings of Italian Concrete Days 2018. ICD 2018. Lecture Notes in Civil Engineering, vol 42. Springer, Cham. https://doi.org/10.1007/978-3-030-23748-6_22
Download citation
DOI: https://doi.org/10.1007/978-3-030-23748-6_22
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-23747-9
Online ISBN: 978-3-030-23748-6
eBook Packages: EngineeringEngineering (R0)