Abstract
The thesis deals with the increase of production productivity using industrial engineering methods. Application of lean methods in production process and logistics. (predicate should be added). In the theoretical part of this thesis the knowledge (information in this case is better) drawn from technical literature in the field of industrial engineering is presented. In particular the problem of balancing the production line is described here. The right production cycle is a basic requirement for serial production. Process analysis and the right detail analysis of production operations is the main indicator for batching of the production cycle and the detection of bottlenecks. In the analytical part, an approach to resolving changes on the production line is described. Time analysis of layout changes and decision analysis are described. Narrow spots have been removed by various principles. There has been a change in the layout of the production line and the application of new technology in the control room. The entire study shows the practical verification of the acquired knowledge in the field of industrial engineering and subsequent application in real operation. The project was built on the REFA methodology that was important for balancing manufacturing operations. In order to achieve the optimum production cycle, the layout had to be changed. The new layout contained a decision analysis to determine the right solution. The whole study shows a systematic approach to applying the above methods.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Conner, G.: Lean manufacturing for the small shop, 1st edn. Society of Manufacturing Engineers, Dearborn, Michigan (2001)
Mašín, I., Vytlačil, M.: Nové cesty k vyšší produktivitě—metody průmyslového inženýrství, 1st edn. Institut průmyslového inženýrství, Liberec (2000)
Dashchenko, A.I.: Reconfigurable manufacturing systems and transformable factories, 1st edn. Springer, New York (2006)
Edl, M., Kudrna, J.: Metody průmyslového inženýrství, 1st edn. SmartMotion, Plzeň (2013)
Armstrong, M.: Řízení lidských zdrojů: nejnovější trendy a postupy, 10th edn. Grada, Praha (2007)
Bedrnová, E., Nový, I.: Psychologie a sociologie řízení, 3rd edn. Management Press, Praha (2007)
Klečka, J.: Nová teorie ekonomiky a managementu organizací a jejich adaptační procesy: Produktivita a její měření—nové přístupy, 1st edn. Grada, Praha (2011)
Košturiak, J., Gregor, M., a kol.: Jak zvyšovat produktivitu firmy, 1st edn. InForm, Žilina (2002)
Schulte, Ch.: Logistika, 1st edn. Victoria Publishing, Praha (1994)
Porter, M.E.: Konkurenční strategie: Metody pro analýzu odvětví a konkurentů, 1st edn. Victoria Publishing, Praha (1994)
Kerber, B.: Lean supply chain management essentials: a framework for materials managers, 1st edn. CRC Press, Boca Raton (2011)
Pernica, P.: Logistika pro 21. století: (Supply chain management), 1st edn. Radix, Praha (2005)
Acknowledgements
This paper was supported by the Internal Grant Agency of the University of West Bohemia, project No. SGS-2012-063—“Integrated design of manufacturing system as metaproduct with a multidisciplinary approach and with using elements of virtual reality.” This paper was created with the subsidy of the project CZ.1.05/2.1.00/03.0093 “RTI—Regional Technological Institute” carried out with the support of Ministry of Education, Youth and Sports.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Kábele, P., Edl, M. (2020). Increasing the Efficiency of the Production Process Due to Using Methods of Industrial Engineering. In: Ivanov, V., et al. Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-22365-6_13
Download citation
DOI: https://doi.org/10.1007/978-3-030-22365-6_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-22364-9
Online ISBN: 978-3-030-22365-6
eBook Packages: EngineeringEngineering (R0)