Abstract
The paper studies the comparison of the group interchangeability method with the full interchangeability method of the technological assembly process in the case of the ladder dimensional circuit complete interchangeability for the assembly components of machines. With the method of group interchangeability, a several times increase of component links dimensions tolerance is achieved as compared with the method of full interchangeability with the introduction of an additional sorting operation. The feasibility study consists of reducing the equipment requirements, the technological machining step and operations number, technological and special accessories, workers’ skills. A significant drawback of the group interchangeability method is the unfinished production occurrence, to reduce which it is necessary to apply different methods of regulation master link sizes. In this regard, it is necessary to conduct a feasibility study of applying the group interchangeability method for each specific case using the methods given in the article. It also provides recurrence equations to formalize the settlements of upper and lower deviations with the tension for ladder dimensional circuit by using the group interchangeability method.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Anurev VI (2001) Reference book for designer-mechanical engineer: In 3 v. vol 2., 8th edn. zrev. and add. In: Zhestkova. Mashinostroenie IN (ed) Moscow, 912 p
Kolesov IM (1999) Fundamentals of mechanical engineering technology: a textbook, 2nd edn. Corr. Higher. School, Moscow
Nepomiluev VV, Oleynikova EV, Gusarova NI (2015) Probabilistic-statistical model of the process of individual selection. Intell Syst Prod 1:8–13
Osetrov VG, Slashchev ES (2015) Assembly in mechanical engineering, instrument making. Theory Technology and Organization, IICP, Izhevsk
Osetrov VG, Slashchev ES (2014) Improving the calculations of the dimensional chain when using the method of group interchangeability. Assemb Mech Eng Instrum Mak 7:24–29
Osetrov VG, Slashchev ES (2014) The calculation of the accuracy of compounds with tension when using the method of group interchangeability. Intell Syst Prod 2(24):52–56
Scholz F (1995) Tolerance stack analysis methods research and technology. Boeing Information and Support Services
Sorokin MN, Anurov YN (2011) Formalization of the method of intergroup interchangeability in the implementation of selective assembly of products. Assemb Mech Eng Instrum Mak 8:16–19
Sorokin MN, Anurov YN (2016) Rolling bearing assembly. Assemb Mech Eng Instrum Mak 2:18–23
Lebedevsky MS, Weitz VL, Fedorov AI (1985) Sci Basis Autom Assemb. Mashinostroenie, Moscow
Altschul R (1994) Case study in statistical tolerancing. Manufacturing Review of the AMSE 7:52–56
Bezyazyachny VF, Nepomiluyev VV (2015) Possible ways to improve the quality of manufacturing engineering products. Assembly in mechanical engineering, instrument making 1:17–20
Chase KW, Gao J, Magleby SP, Sorensen CD (1996) Including geometric feature variations in tolerance analysis of mechanical assemblies. IE Trans (Inst Ind Eng) 28(10):795–807
Goldfarb V, Malina O, Trubachev E (2016) New concept of the process of designing gearboxes and gear systems. Mech Mach Sci 34:405–423
Henzold G (2006) Geometrical dimensioning and tolerancing for design manufacturing and inspection, 2nd edn. Elsevier. Oxford, UK
Laaneots R (2004) Modified calculation method of tolerance of dimensional chain dependent link. In: 4th international DAAAM symposium. Industrial engineering—innovation as competitive edge SME. Tallinn, Estonia, pp 43–46
Mishunin VP, Osetrov VG (2002) Optimization in achieving the accuracy of the axial clearance in the gearboxes. Assemb Mech Eng Instrum Mak 6:2–4
Srinivasan V (2008) Standardizing the specification, verification, and exchange of product geometry research, status and trends. Comput Aided Des 40(7):738–749
Sun Y, Gupta M (2004) Optimization of a flat due. Mechanical Engineering—Engineering Mechanics Department Michigan Technological University Houghton, ANTEC, pp 3007–3011
Voyachek II (2006) Integrated design of fixed couplings: monograph. Penza State University, Penza
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Voyachek, I.I., Slashchev, E.S., Malikova, D.M. (2020). Feasibility Study of Applying Group Interchangeability Method for Assembly Components of Machines. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019). ICIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-22063-1_30
Download citation
DOI: https://doi.org/10.1007/978-3-030-22063-1_30
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-22062-4
Online ISBN: 978-3-030-22063-1
eBook Packages: EngineeringEngineering (R0)