Skip to main content
SpringerLink
Log in

Stiffness Maximization on the Basis of Layout Characteristics of the Elastic Machine System and Milling Process

  • Conference paper
  • First Online:
Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019) (ICIE 2019)

Part of the book series: Lecture Notes in Mechanical Engineering ((LNME))

Included in the following conference series:

Abstract

The paper dwells upon improving the efficiency of milling by increasing the stiffness of the technological system. The stiffness is affected by the system layout geometry, which features the non-uniformity of strains in different spatial directions, and is characterized by the axes of stiffness. The paper defines the axes of stiffness by means of finite-element modeling of the technological system, which consists of the machine supports, the tool, the tool fixture, and the workpiece. Finite-element modeling is performed on any computer-aided engineering system. As a result of the calculation, the deformation of the most characteristic element of the technological system is determined. Based on the finite-element computations, the theory of elasticity is used to find the direction of stiffness axes in the machine workspace. It is herein proposed to use such direction in order to find the cutting parameters by reference to the cutting-force components ratio when milling. Using this method during process engineering enables optimizing the system layout as well as the cutting parameters.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 169.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 219.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Sokolovsky AP (1946) Stiffness in mechanical engineering (Zhestkost v tekhnologiyakh mashinostroyeniya). Mashgiz, Moscow

    Google Scholar 

  2. Kasjanov SV, Kondrashov AG, Safarov DT (2017) Regulation of geometrical parameters deviations of automotive components parts through diagnostic measurements organization. Procedia Eng 206:1508–1514

    Article  Google Scholar 

  3. Irzaev GH (2015) Model of control of products manufacturability in an industrial enterprise. Econ Manag Syst control 15:50–57

    Google Scholar 

  4. Anikeyeva OV (2017) The analysis of the experience of modern national scientific schools in the field of a metal cutting machines precision Russian Internet. J Ind Eng 5–4:14–29

    Google Scholar 

  5. Govorkov AS, Akhatov RH (2011) Analysis of the technological properties of aviation products based on the information image of the product. Review of Samara Scientific Center of the Russian Academy of Sciences 6-1:285–292

    Google Scholar 

  6. Balabanov IP, Simonova LA, Balabanova ON (2015) Systematization of accuracy indices variance when modelling the forming external cylindrical turning process. IOP Conf Ser: Mater Sci Eng 86:012010

    Article  Google Scholar 

  7. Ziyatdinov RR (2015) The choice of equipment for automation of hazardous production facilities. IOP Conf Ser. Mater Sci Eng 86:012027

    Article  Google Scholar 

  8. Lavrentyieva M, Govorkov A (2017) Using a discrete product model to determine the design element junctures. MATEC Web of Conf 129(1):03003

    Article  Google Scholar 

  9. Khomyakov VS, Dosko SI, Zuoyi Liu (1988) Identification of elastic machine systems by modal analysis (Identifikatsiya uprugikh sistem stankov na osnove modalnogo analiza). Russ Eng Res 7:11–14

    Google Scholar 

  10. Law M, Altintas Y, Phani AS (2013) Rapid evaluation and optimization of machine tools with position-dependent stability. Int J Mach Tools Manuf 68:81–90

    Article  Google Scholar 

  11. Whalley R, Ebrahimi M (2000) Analysis, modeling and simulation of stiffness in machine tool drives. Comput Ind Eng 38:93–105

    Article  Google Scholar 

  12. Timoshenko SP, Dzh Gud’er (1975) Theory of elasticity. Nauka, Moscow

    Google Scholar 

  13. Kudinov VA (1967) Dynamics of machine tools. Mashinostroenie, Moscow

    Google Scholar 

  14. Rudakov KN (2011) FEMAP 10.2.0. Geometric and finite-element modeling of structures (Geometricheskoye i konechno-elementnoye modelirovaniye konstruktsy). KPI, Kiev

    Google Scholar 

  15. Goncharov PS, Artamonov IA, Khalitov TF et al (2012) NX Advanced simulation. Engineering analysis. DMK Press, Moscow

    Google Scholar 

  16. Ryabov EA, Yurasov SYu, Khisamutdinov RM (2016) Internal contour processing by trochoidal milling with end mills. Innovative engineering technologies, equipment and materials—2016 (ISTK “IETEM-2016”). Kazan, p 150

    Google Scholar 

  17. Grechishnikov VA, Petukhov YE, Pivkin PM et al (2017) Trochoidal slot milling. Russ Eng Res 37(9):821–823

    Article  Google Scholar 

  18. Golovko AN, Kondrashov AG, Yurasov SYu (2017) Improved design of a worm type instrument for final machining of evolvent gear teeth. Procedia Engineering 206:1333–1336

    Article  Google Scholar 

  19. Kolesnikov KS, Aleksandrov DA, Astashev VK et all (1994) Dynamics and strength of machines. Theory of mechanisms and machines. Mashinostroenie, Moscow

    Google Scholar 

  20. Gruby SV, Zaytsev AM (2013) Research of end mills during milling of body parts made of aluminum alloys. Sci Educ 12:31–54

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Naberezhnye Chelny Institute (Branch) of Kazan Federal University, 68/19 Mira Prospekt, Naberezhnye Chelny, 423812, Russia

    R. M. Khusainov & A. R. Sabirov

Authors
  1. R. M. Khusainov
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. A. R. Sabirov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to R. M. Khusainov .

Editor information

Editors and Affiliations

  1. South Ural State University, Chelyabinsk, Russia

    Andrey A. Radionov

  2. Platov South Russian State Polytechnic University, Novocherkassk, Russia

    Oleg A. Kravchenko

  3. South Ural State University, Chelyabinsk, Russia

    Victor I. Guzeev

  4. South Ural State University, Chelyabinsk, Russia

    Yurij V. Rozhdestvenskiy

Rights and permissions

Reprints and permissions

Copyright information

© 2020 Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Khusainov, R.M., Sabirov, A.R. (2020). Stiffness Maximization on the Basis of Layout Characteristics of the Elastic Machine System and Milling Process. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019). ICIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-22063-1_12

Download citation

  • DOI: https://doi.org/10.1007/978-3-030-22063-1_12

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-030-22062-4

  • Online ISBN: 978-3-030-22063-1

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation