Abstract
Fibrous materials obtained from the renewable natural sources of plants, crops are very much essential for the development of green/partially green composite materials. In that line several fibres were extracted from bast, leaves, stem, fruit, seed and stalk etc. by various researchers. Limited work was done on okra fibre and its composites performance under different loading conditions. Now, in this work an attempt was made to explore a new variety of okra fibre i.e. NoKH and was reinforced into epoxy matrix for making cum processing of composites under different conditions of temperature and time. Further, the performance of these composites is compared with hybrid okra fibre reinforced polyester composites conditioned and tested under ASTM standards. Marvel NoKh fibre reinforced epoxy composites processed at T2, t3 have exhibited highest tensile strength and modulus of 60.51 MPa, 1.05 GPa respectively than other composites. Tested composite specimens were examined under SEM to know the bonding between fibre and matrix.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
De Rosa IM, Maria Kenny J, Puglia D et al (2010) Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites. Compos Sci Technol 70:116–122
Mieck KP, Reussmann T, Nechwatal A (2003) About the characterization of the mechanical properties of natural fibres. Mater Sci Eng Technol 34:285–289
Bos HL, Van Den Oever MJA, Peters OCJJ (2002) Tensile and compressive properties of flax fibres for natural fibre reinforced composites. J Mater Sci 37:1683–1692
Nechwatal A, Mieck KP, Reußmann T (2003) Developments in the characterization of natural fibre properties and in the use of natural fibres for composites. Compos Sci Technol 63:1273–1279
Saravanakumara SS, Kumaravelb A, Nagarajanc T et al (2013) Characterization of a novel natural cellulosic fiber from Prosopis juliflora bark. Carbohydr Polym 92:1928–1933
Bledzki AK, Gassan J (1999) Composites reinforced with cellulose based fibres. Prog Polym Sci 24:221–274
De Rosa IM, Kenny José M, Maniruzzaman Md et al (2011) Effect of chemical treatments on the mechanical and thermal behaviour of okra (Abelmoschus esculentus) fibres. Compos Sci Technol 71:246–254
Bachtiar D, Sapuan SM, Hamdan MM (2008) The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites. Mater Des 29:1285–1290
Baiardo M, Zini E, Scandola M (2004) Flax fibre–polyester composites. Compos A 35:703–710
Aziz Sharifah H, Ansell Martin P (2004) The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: part 1—polyester resin matrix. Compos Sci Technol 64:1219–1230
Aziz Sharifah H, Ansell Martin P, Clarke Simon J et al (2005) Modified polyester resins for natural fibre composites. Compos Sci Technol 65:525–535
Monteiro SN, Terrones LAH, D’Almeida JRM (2008) Mechanical performance of coir fiber/polyester composites. Polym Test 27:591–595
White NM, Ansell MP (1983) Straw-reinforced polyester composites. J Mater Sci 18:1549–1556
Wambua P, Vangrimde B, Lomov S et al (2007) The response of natural fibre composites to ballistic impact by fragment simulating projectiles. Compos Struct 77:232–240
Bisanda ETN, Ansell MP (1991) The effect of silane treatment on the mechanical and physical properties of sisal-epoxy composites. Compos Sci Technol 41:165–178
Corradi S, Isidori T, Corradi M et al (2009) Composite boat hulls with bamboo natural fibres. Int J Mater Prod Technol 36:73–89
Harisha S, Peter Michael D, Bensely A et al (2009) Mechanical property evaluation of natural fiber coir composite. Mater Charact 60:44–49
Herrera-Franco P J, Valadez-Gonza´lez A (2004) Mechanical properties of continuous natural fibre-reinforced polymer composites. Composites Part A 35:339–345
Mohanty A K, Misra M, Drzal1 L T (2002) Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials world. J Polym Environ 10:19–26
Singha AS, Thakur Vijay Kumar (2008) Mechanical properties of natural fibre reinforced polymer composite. Bull Mater Sci 31:791–799
Yan L, Chouw N, Yuan X (2012) Improving the mechanical properties of natural fibre fabric reinforced epoxy composites by alkali treatment. J Reinf Plast Compos 31:425–437
Bakry M, Mousa MO, Ali WY (2013) Friction and wear of friction composites reinforced by natural fibres. Mater Sci Eng Technol 44:21–28
Taha I (2012) Investigation of flax fibre reinforced epoxy friction composites. Mater Sci Eng Technol 43:1059–1066
Facca AG, Kortschot Mark T, Yan N (2006) Predicting the elastic modulus of natural fibre reinforced thermoplastics. Compos A 37:1660–1671
Bogoeva-Gaceva G, Avella M, Malinconico M et al (2007) Natural fiber eco-composites. Polym Comp 28:98–107
Nishino T, Matsuda I, Hirao K (2004) All-cellulose composite. Macromolecules 37:7683–7687
Nabi Saheb D, Jog JP (1999) Natural fiber polymer composites: a review. Adv Polym Tech 18:351–363
Ruys D, Crosky A, Evans WJ (2002) Natural bast fibre structure. Int J Mater Prod Tech 17:2–10
Thomas S, Pothan LA, Cherian BM (2009) Advances in natural fibre reinforced polymer composites: macro to nanoscales. Int J Mater Prod Tec 36:317–333
Mougin G, Magnani M, Eikelenberg N (2009) Natural-fibres composites for the automotive industry: challenges, solutions and applications. Int J Mater Prod Tec 36:176–188
Singh JIP, Singh S, Dhawan V (2018) Effect of curing temperature on mechanical properties of natural fiber reinforced polymer composites. J Nat Fibers 15:687–696
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Srinivasababu, N. (2020). Comparison in Performance of Hybrid and Marvel NoKH Okra/Abelmoschus esculentus Fibre Reinforced Polymer Composites Under Tensile Load. In: Öchsner, A., Altenbach, H. (eds) Engineering Design Applications II. Advanced Structured Materials, vol 113. Springer, Cham. https://doi.org/10.1007/978-3-030-20801-1_18
Download citation
DOI: https://doi.org/10.1007/978-3-030-20801-1_18
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20800-4
Online ISBN: 978-3-030-20801-1
eBook Packages: EngineeringEngineering (R0)