Abstract
The goal of this article is to show the opportunities and limitations of Robust Design techniques in the design process of developing new applications that combine 3D printing and textiles. Two case studies are discussed in which various elements of Robust Design techniques were used to understand and improve the adhesion strength of 3D printed material on fabric and the pressure exerted by a pneumatic actuator for the purpose of acupressure point manipulation. The advantage of combining 3D printing and textiles is the possibility to transform the properties of a regular textile material by using additive manufacturing. This can be beneficial for the design of specific products and contexts, for example to add mechanical or electronic functions. The experiments presented in this paper were executed as part of an undergraduate course taught to design students in the context of an Industrial Design program.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Rivera, M.L., Moukperian, M., Ashbrook, D., Mankoff, J., Hudson, S.E.: Stretching the bounds of 3D printing with embedded textiles. In: Proceedings of the 2017 CHI Conference on Human Factors in Computing Systems, pp. 497–508. ACM, New York, NY (2017)
Mikkonen, J., Myllymäki, R., Kivioja, S., Vanhakartano, S., Suonsilta, H.: Printed material and fabric. In: Ehn, P., Brand, E., Hellström Reimer, M., Degn Johansson, T., Vallgårda, A., Markussen, T. (eds.) Proceedings of the 2013 NORDES Nordic Design Research Conference, pp. 313–321 (2013)
Nilsson, L.: Open structures: Designing alterable 3D printed textiles. In: Bang, A.L., Buur, J., Alma Lønne, I., Nimkulrat, N. (eds.) EKSIG 2015: Tangible Means—Experiential Knowledge Through Materials, pp. 133–144. University of Southern Denmark, Kolding, Denmark (2015)
ten Bhömer, M., Canova, R., de Laat, E.: Body inspired design for knitted body-protection wearables. In: Proceedings of the 2018 ACM Conference Companion Publication on Designing Interactive Systems, pp. 135–139. ACM, New York, NY, USA (2018)
Sabantina, L., Kinzel, F., Ehrmann, A., Finsterbusch, K.: Combining 3D printed forms with textile structures—mechanical and geometrical properties of multi-material systems. IOP Conf. Ser.: Mater. Sci. Eng. 87, 1–5 (2015)
Pei, E., Shen, J., Watling, J.: Direct 3D printing of polymers onto textiles: experimental studies and applications. Rapid Prototyp. J. 21, 556–571 (2015)
Hasenkamp, T., Arvidsson, M., Gremyr, I.: A review of practices for robust design methodology. J. Eng. Des. 20, 645–657 (2009)
Phadke, M.S.: Quality Engineering Using Robust Design. Prentice Hall (1989)
Hickey, A., O’Hanlon, A., McGee, H., Donnellan, C., Shelley, E., Horgan, F., O’Neill, D.: Stroke awareness in the general population: knowledge of stroke risk factors and warning signs in older adults. BMC Geriatr. 9, 1–8 (2009)
Xu, J., Yang, Y.: Traditional Chinese medicine in the Chinese health care system. Health Policy 90, 133–139 (2009)
Fang, Z., Ning, J., Xiong, C., Shulin, Y.: Effects of electroacupuncture at head points on the function of cerebral motor areas in stroke patients: a pet study. Evid. Based. Complement Alternat. Med. 2012, 1–9 (2012)
Yan, X., Yan, J., Gong, L., Jiang, S.: Study on standardization of tuina manipulation parameters. World Sci. Technol. Mod. Tradit. Chin. Med. 17, 2443–2450 (2015)
Taguchi, G.: Introduction to Quality Engineering: Designing Quality into Products and Processes. Asian Productivity Organization/UNIPUB (1986)
Arnér, M.: Statistical Robust Design: An Industrial Perspective. Wiley (2014)
Acknowledgments.
Part of this work was supported by the National Natural Science Foundation of China (NSFC, Grant No 51750110497). We would like to thank all the students who enthusiastically participated during the Industrial Design module IND313.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
ten Bhömer, M., Tate, D., Wang, S., Campanile, F., Chen, Y. (2020). Application of Robust Design Techniques for 3D Printing on Textiles. In: Di Nicolantonio, M., Rossi, E., Alexander, T. (eds) Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping. AHFE 2019. Advances in Intelligent Systems and Computing, vol 975. Springer, Cham. https://doi.org/10.1007/978-3-030-20216-3_15
Download citation
DOI: https://doi.org/10.1007/978-3-030-20216-3_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20215-6
Online ISBN: 978-3-030-20216-3
eBook Packages: EngineeringEngineering (R0)