Abstract
In this paper, we present a series of case studies of origami-like geometries modelled and animated following the principles of the synthetic method applied through parametric modelling applications. The aim of this research is to analyze the benefits and criticalities of the proposed method in the field of applied origami design. The presented method will be compared with the algebraic-based analytical approach highlighting the strengths and weaknesses of both methods. This paper is based on the PhD thesis of the last Author and we present a selection of the most interesting generative algorithms we have studied and designed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kuribayashi, K., Tsuchiya, K., You, Z., Tomus, D., Umemoto, M., Ito, T., Sasaki, M.: Self-deployable origami stent grafts as a biomedical application of Ni-rich TiNi shape memory alloy foil. Mater. Sci. Eng. vol. A 419(1–2), 131–137 (2006)
Lang, R.J., Magleby, S.P., Howell, L.L.: Single degree-of-freedom rigidly foldable cut origami flashers. J. Mech. Robot. 8(3), 031005-1–031005-15 (2016)
Zirbel, S.A., Lang, R.J., Thomson, M.W., Sigel, D.A., Walkemeyer, P.E., Trease, B.P., Magleby, S.P., Howell, L.L.: Accommodating thickness in origami-based deployable arrays. J. Mech. Des. 135(11), 111005-1–111005-11 (2013)
Lee, T., Gattas, J.M.: Geometric design and construction of structurally stabilized accordion shelters. J. Mech. Robot. 8(3), 031009-1–031009-8 (2016)
Gattas, J.M., You, Z.: Design and digital fabrication of folded sandwich structures. Autom. Constr. 63, 79–87 (2016)
Li, S., Vogt, D.M., Rus, D., Wood, R.J.: Fluid-driven origami-inspired artificial muscles. In: Proc. Natl. Acad. Sci., vol. 114, no. 50, pp. 13132–13137 (2017)
Software by Tachi. http://www.tsg.ne.jp/TT/software/
Liu, K., Paulino, G.H.: Highly efficient nonlinear structural analysis of origami assemblages using the MERLIN2 software. In: Origami 7, vol. 4 (Eng. 2), pp. 1167–1182 (2018)
Kawaguchi, K., Ohsaki, M., Takeuchi, T., Liu, K., Paulino, G.H.: MERLIN: A MATLAB implementation to capture highly nonlinear behaviour of non-rigid origami. In: Proc. of IASS Annu. Symp. (International Assoc. Shell Spat. Struct.), vol. 2016, no. 13, pp. 1–10 (2016)
Ghassaei, A., Demaine, E.D., Gershenfeld, N.: Fast, interactive origami simulation using GPU computation. In: Origami 7: Proceedings of the 7th International Meeting on Origami in Science, Mathematics and Education (OSME 2018), Oxford, England, 5–7 September 2018
Mitani, J.: A design method for 3D origami based on rotational sweep. Comput. Aided. Des. Appl. 6(1), 69–79 (2009)
Grasshopper official page. http://www.grasshopper3d.com/
Zinelli, F.M.: Dei due metodi analitico e sintetico discorso dell’abate. Nella tipografia di Giuseppe Picotti, Venezia (1832)
Loria, G.: Metodi Matematici: Essenza, Tecnica, Applicazioni. Ulrico Hoepli, Milano (1935)
Cardone, V.: Gaspard Monge padre dell’ingegnere contemporaneo. DEI - Tipografia del Genio Civile, Roma (2017)
Migliari, R., Baglioni, L., Fallavollita, F., Fasolo, M., Mancini, F.M., Romor, J., Salvatore, M.: De prospectiva pingendi. TOMO II [Disegni]. Istituto Poligrafico e Zecca dello Stato, Roma (2016)
Migliari, R., Baglioni, L., Fallavollita, F., Fasolo, M., Mancini, F.M., Romor, J., Salvatore, M.: De prospectiva pingendi. TOMO II [Disegni]. Istituto Poligrafico e Zecca dello Stato, Roma (2017)
Fallavollita, F., Salvatore, M.: The construction of the principal axes of the quadratic surfaces. Disegnare Idee Immagini 46, 42–51 (2013)
Migliari, R.: Geometria Descrittiva, vol. 1–2. Città Studi edizioni, Novara (2009)
Rhinoceros official page. https://www.rhino3d.com/
Abel, Z., Cantarella, J., Demaine, E.D., Eppstein, D., Hull, T.C., Ku, J.S., Lang, R.J., Tachi, T.: Rigid origami vertices: conditions and forcing sets. J. Comput. Geom. 7(1), 171–184 (2016)
Mitani, J., Igarashi, T.: Interactive design of planar curved folding by reflection. In: Pacific Graphics (Pacific Conference on Computer Graphics and Applications - Short Papers), pp. 77–81 (2011)
Huffman, D.A.: Curvature and creases: a primer on paper. IEEE Trans. Comput., vol. C-25, no. 10, pp. 1010—1019 (1976)
Hull, T.C.: Project Origami. A K Peters/CRC Press, New York (2006)
Tachi, T.: Generalization of rigid foldable quadrilateral mesh origami. J. Int. Assoc. Shell Spat. Struct 50(October), 2287–2294 (2009)
Casale, A., Valenti, G.M., Calvano, M.: Architettura delle superfici piegate: le geometrie che muovono gli origami. Edizioni K, Roma (2013)
Foschi, R., Tachi, T.: Designing self-blocking systems with non-flat-foldable degree-4 vertices. In: Origami 7, vol. 3 (Eng. 1), pp. 795–809 (2018)
Acknowledgments
This research was supported by the University of Bologna and by the University of Tokyo.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Apollonio, F.I., Fallavollita, F., Foschi, R. (2020). Parametric Design of Applied Origami with a Synthetic Computational Approach. In: Di Nicolantonio, M., Rossi, E., Alexander, T. (eds) Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping. AHFE 2019. Advances in Intelligent Systems and Computing, vol 975. Springer, Cham. https://doi.org/10.1007/978-3-030-20216-3_13
Download citation
DOI: https://doi.org/10.1007/978-3-030-20216-3_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20215-6
Online ISBN: 978-3-030-20216-3
eBook Packages: EngineeringEngineering (R0)