Abstract
This paper presents the use of a geared five-bar with connecting rod and sliding output for mechanical presses. Mechanical presses are used to form sheet metal parts and have economical benefits to other presswork production methods. A conventional mechanical press is driven with a slider-crank mechanism. Extended drive presses are used to alter the stamping motion required for certain operations. For instance, certain coining and squeezing operations prefer a long dwell. A knuckle joint mechanism is commercially available and permits some control over the output motion. A synthesis process is developed in this paper to produce a prolonged dwell and is applied to the kuckle joint mechanism. The geared five-bar with sliding output is shown to produce a longer dwell than a knuckle joint mechanism.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Groover, M. P., 2016, Fundamentals of Modern Manufacturing: Materials, Processes and Systems, 6th ed., Wiley.
Yelich, T., Bilur, E., 2012, “Mechanical presses” Sheet Metal Forming: Fundamentals, ASM International.
Erdman, A., Sandor, G., and Kota, S., 2001, Mechanism Design: Analysis and Synthesis, 4th ed., Prentice Hall.
Almandeel, A., Murray, A. P., Myszka, D. H., and Stumph III, H. E., 2015, “A Function Generation Synthesis Methodology for All Defect-Free Slider-Crank Solutions for Four Precision Points”, ASME J. Mech. Rob., 7(3).
Erdman, A., Sandor, G., and Kota, S., 1984, Advanced Mechanism Design: Analysis and Synthesis, Vol. 2, Prentice Hall.
Freudenstein, F., 1959, “Structural Error Analysis in Plane Kinematic Synthesis”, J. Eng. Ind., 81(1), pp. 15–22.
Hwang, W. M., Hwang, Y. C., Chiou, S. T., 1995, “A Drag-Link Drive of Mechanical Presses for Precision Drawing”, Int. J. Mach. Tools Manufact., 35(10), p. 1425–1433.
Ham K. C., Jang, D. H., 2009, “Kinematical Analysis on the Several Linkage Drives for Mechanical Presses”, J. Mech. Sci. Tech., 23(2), p. 512–524.
Li, H., Zhang, Y., 2010, “Seven-Bar Mechanical Press with Hybrid-Driven Mechanism for Deep Drawing; Part 1: Kinematics Analysis and Optimum Design”, J. Mech. Sci. Tech., 24(11), p. 2153–2160.
Ali, H., Murray, A., Myszka, D., 2017, “The Synthesis of Function Generating Mechanisms for Periodic Curves Using Large Numbers of Double-Crank Linkages”, ASME J. Mech. Rob., 9(3), p. 031002.
Ting, K.-L., 1994, “Mobility Criteria of Geared Five-Bar Linkages”, Mech. Mach. Theory, 29(2), pp. 251–264.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Myszka, D., Murray, A., Armstrong, A., Ali, H. (2019). Mechanical Presses Driven by a Geared Five-Bar with Sliding Output to Produce a Prolonged Dwell. In: Uhl, T. (eds) Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science, vol 73. Springer, Cham. https://doi.org/10.1007/978-3-030-20131-9_31
Download citation
DOI: https://doi.org/10.1007/978-3-030-20131-9_31
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20130-2
Online ISBN: 978-3-030-20131-9
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)