Abstract
This paper proposes a 4-DOF (degrees-of-freedom) n-RER parallel manipulator (PM) with congruent base and moving platform (CBP). The 4-DOF n-RER PM is composed of a base and a moving platform connected by n RER legs, each of which is a serial kinematic chain composed of a revolute (R) joint, a planar (E) joint and an R joint in sequence. At first, a set of constraint equations of the n-RER PM with CBP is first derived. It is then found that like the 3-RER PM with congruent triangular base and platform in the literature, the n-RER PM with CBP has three 4-DOF operation modes regardless of the number of legs (n > 2) and link parameters. The characteristics of the n-RER PM with CBP in different operation modes are also presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Huang, Z., Li, Q.C., and Ding, H.F.: Theory of Parallel Mechanisms, Dordrecht: Springer (2012).
Yang, T-L, Liu, A., Shen, H., Hang, L., Luo, Y., and Jin, Q.: Topology Design of Robot Mechanisms, Springer, Singapore (2018).
Kong, X. and Gosselin, C.: Type Synthesis of Parallel Mechanisms, Springer, The Netherlands (2007).
Kong, X.: Type synthesis of variable degree-of-freedom parallel manipulators with both planar and 3T1R operation modes. In Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, (Vol. 4, pp. 497-504). DETC2012-70621 (2012).
Coste, M., Mady Demdah, K.: Extra modes of operation and self-motions in manipulators designed for Schoenflies motion. Journal of Mechanisms and Robotics 7(4): 041020-041020-6 (2015).
Kong, X.: Reconfiguration analysis of a 4-DOF 3-RER parallel manipulator with equilateral triangular base and moving platform. Mechanism and Machine Theory 98, 180-189 (2016).
Tian, Y., Zhang, D., Yao, Y.-A., Kong, X., Li, Y.: A reconfigurable multi-mode mobile parallel robot. Mechanism and Machine Theory, 111, 39–65 (2017)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Kong, X., Yao, YA. (2019). Operation mode analysis of a 4-DOF n-RER parallel manipulator with three operation modes. In: Uhl, T. (eds) Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science, vol 73. Springer, Cham. https://doi.org/10.1007/978-3-030-20131-9_250
Download citation
DOI: https://doi.org/10.1007/978-3-030-20131-9_250
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20130-2
Online ISBN: 978-3-030-20131-9
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)