Abstract
Physical Human-Robot Interaction requires collision detection to enable a safe sharing of workspace between humans and robots, mostly using model based algorithms. Majority of robot tasks involve physical interaction with the environment, and consequently the forces occurring during the interaction. This paper presents an experimental testing of influence of unmodelled but intentional forces on the quality of collision detection algorithms. Results from testing of different manipulation and assembly tasks are shown and discussed in terms of their significance to collision detection and similarity with real collisions. Presented results and conclusions from this paper may serve as guidelines for future collision detection related work by offering a better understanding and insight on the relevance of intentional external forces.
The work was partially supported by the Serbian Ministry of education, science, and technological development, grant No. TR35003 and H2020 project “A Pan European Network of Robotics DIHs for Agile Production (DIH²)”.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Geravand, M., Flacco, F., De Luca, A.: Human-robot physical interaction and collaboration using an industrial robot with a closed control architecture. In: Proceedings of IEEE International Conference on Robotics and Automation, 2013, pp. 4000–4007 (2013)
De Luca, A., Albu-Schäffer, A., Haddadin, S., Hirzinger, G.: Collision detection and safe reaction with the DLR-III lightweight manipulator arm. In: IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS2006), Beijing, China, pp. 1623–1630 (2006)
Yamada, Y., Hirasawa, Y., Huand, S., Umetani, Y.: Fail-safe human/robot contact in the safety space. In: IEEE International Workshop on Robot and Human Communication, pp. 59–64 (1996)
De Luca, A., Flacco, F.: Integrated control for pHRI: collision avoidance, detection, reaction and collaboration. In: Proceedings of 4th IEEERAS & EMBS Conference on Biomedical Robotics and Biomechatronics, 2012, pp. 288–295 (2012)
Yamada, Y., Hirasawa, Y., Huang, S., Umetani, Y., Suita, K.: Human-robot contact in the safeguarding space. IEEE/ASME Trans. Mech. 2(4), 230–236 (1997)
Chen, W., Sun, Y., Huang, Y.: A collision detection system for an assistive robotic. communications in computer and information science, pp. 117–123 (2010)
Ferraguti, F., Secchi, C., Fantuzzi, C.: A tank-based approach to impedance control with variable stiffness. In: IEEE International Conference on Robotics and Automation (ICRA), Karlsruhe, pp. 4948–4953 (2013)
Schindlbeck, C., Haddadin, S.: Unified passivity-based Cartesian force/impedance control for rigid and flexible joint robots via task-energy tanks. In: IEEE International Conference on Robotics and Automation (ICRA), Seattle, pp. 440–447 (2015)
Bahloul, A., Tliba, S., Chitour, Y.: Dynamic parameters identification of an industrial robot with and without payload. In: 18th IFAC Symposium on System Identification, SYSID 2018, IFAC, July 2018, Stockholm, pp. 443–448 < hal-01866381 > (2018)
Swevers, J., Verdonck, W., Schutter, J.D.: Dynamic model identification for industrial robots. IEEE Control Syst. Mag. 27(5), 58–71 (2007)
Brunot, M., Janot, A., Carillo, F., Garnier, H.: A pragmatic and systematic statistical analysis for identification of industrial robots. In: Proceedings of the IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2017, Munich, Germany, pp. 559–564 (2017)
Gautier, M.: Numerical calculation of the base inertial parameters of robots. In: Proceedings of the IEEE International Conference on Robotics and Automation (ICRA), 1990, pp. 1020–1025 (1990)
Gautier, M., Khalil, W.: On the identification of the inertial parameters of robots. In: Proceedings of the IEEE International on Decision and Control (CDC), 1988, pp. 2264–2269 (1988)
Gautier, M., Khalil, W.: Direct calculation of minimum set of inertial parameters of serial robots. IEEE Trans. Robot. Autom. 6, 368–373 (1990)
Janot, A., Vandanjon, P.-O., Gautier, M.: A generic instrumental variable approach for industrial robot identification. IEEE Trans. Control Syst. Technol. 22(1), 132–145 (2014)
Jin, J., Gans, N.: Parameter identification for industrial robots with a fast and robust trajectory design approach. Robot. Comput.-Integr. Manuf. 31, 21–29 (2015)
Khosla, P.K., Kanade, T.: Parameter identification of robot dynamics. In: Proceedings of the IEEE International on Decision and Control (CDC), 1985, pp. 1754–1760 (1985)
Walter, E., Pronzato, L.: Identification of parametric models from experimental data. Communications and Control Engineering, 1st edn. Springer, London (1997)
Deniša, M., Gams, A., Ude, A., Petrič, T.: Learning compliant movement primitives through demonstration and statistical generalization. IEEE/ASME Trans. Mech. 21(5), 2581–2594 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Gordić, Z., Jovanović, K. (2020). Influence of Unmodelled External Forces on the Quality of Collision Detection. In: Berns, K., Görges, D. (eds) Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980. Springer, Cham. https://doi.org/10.1007/978-3-030-19648-6_37
Download citation
DOI: https://doi.org/10.1007/978-3-030-19648-6_37
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-19647-9
Online ISBN: 978-3-030-19648-6
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)