Abstract
One of the most destructive agents of historical pipe organs is the “tin pest” of organ pipes. . It is generally recognised that the tin pest of pipes made of high lead composition alloys can completely destroy organ pipes in less than 30 years. Usually the tin pest was observed where the metal is in contact with the pipe support or on the foot of the tip where the pipe is standing on the toe board. Another common location of degradation is in the blocks in reed pipes. Pipes organs are degraded by atmospheric corrosion. Atmospheric corrosion of lead and lead alloys is influenced by a complex variety of factors determined by the geographic location of the historical organ, environmental conditions including air temperature and relative humidity, condensation in the pipes, emission of different corrosive substances from materials inside and outside the organ, and possible combinations of these conditions. Pipes organs are degraded by atmospheric corrosion. Atmospheric corrosion of lead and lead alloys is influenced by a complex variety of factors determined by the geographic location of the historical organ, environmental conditions including air temperature and relative humidity, condensation in the pipes, emission of different corrosive substances from materials inside and outside the organ, and possible combinations of these conditions. Pipe organs are also degraded by biological agents like mice, fungi and insects. Fire is also a major danger for historical organs, which can be prevented, in most of cases, by maintenance and housekeeping. The degradation of brass instruments is affected by atmospheric corrosion, dezincification and stress- corrosive cracking.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Audsley GA (1965) The art of organ building. Dover, Mineola, New York
Baretzky B, Friesel M, Petelin A, Mazilkin AA, Straumal BB (2006) Structure of historical brass tongues and shallots from baroque organs. In: Defect and diffusion forum, vol 249, pp 275–280. http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.876.6736&rep=rep1&type=pdf
Baretzky B, Friesel M, Straumal B (2007) Reconstruction of historic alloys for pipe organs brings true Baroque music back to life. MRS Bull 32:249–255
Bergsten CJ (2007) Corrosion of lead and lead-tin alloys of organ pipes in Europe, vol 1–Papers, p 91
Bovelacci A, Ciliberto E, Greco E, Viscuso E (2013) Surface and Bulk Investigations of Organ Metal Pipe Degradation. Procedia Chemistry 8:130–138
Brunhuber E (1968) Schmelz-und Legierungstechnik von Kupferwerkstoffen (Melting and alloying of copper materials). Schiele & Schön, Berlin
Chiavari C, Martini C, Poli G, Prandstraller D (2006) Deterioration of tin-rich organ pipes. J Mater Sci 41(6):1819–1826
Chiavari C, Martini C, Prandstraller D, Niklasson A, Johansson LG, Svensson JE, Bergsten CJ (2008) Atmospheric corrosion of historical organ pipes: the influence of environment and materials. Corros Sci 50(9):2444–2455
Clarke T (2004) Music and chemistry: organ failure. Nature 427(6969):8–9
De Keersmaecker M, Verbeken K, Adriaens A (2014) Lead dodecanoate coatings for the protection of lead and lead–tin alloy artefacts: two examples. Appl Surf Sci 29:149–160
Deflorian F, Fedel M (2013) Electrochemical analysis of the degradation of lead alloy organ-pipes due to acetic acid. J Cult Heritage 14(3):254–260
Dullat G (1989) Metallblasinstrumentenbau (Metal wind instrument making) Wilhelmshavenm Noetzel, Entwicklungsstufen und Technologie
Duran A, Herrera LK, de Haro MJ, Justo A, Perez-Rodriguez JL (2008) Non-destructive analysis of cultural heritage artefacts from Andalusia, Spain, by X-ray diffraction with Göbel mirrors. Talanta 76(1):183–188
Eckert A (2008) Organ pipes and tin pest. Mater Corros 59(3):254–260
Erdman (1851) cited by Chivari et al. (2006)
Falbe J, Regnitz M (eds) (1999) Rőmmpp Chemistry Lexicon, vol 6, 10th edn. Georg Thieme Verlag, Stuttgart, p 5078
Fletcher NH, Rossing TD (2010) The physics of musical instruments: Pipe organs, 2nd edn. Springer, Science & Business Media, Inc., Berlin
Gilberg M (1991) History of tin pest: the museum disease. Austr Inst Conserv Cult Mater Bull 17(1&2):3–20
Grayburn RA, Dowsett M, De Keersmaecker M, Banerjee D, Brown S, Adriaens A (2014a) Towards a new method for coating heritage lead. Heritage Science 2(1):14
Grayburn R, Dowsett M, De Keersmaecker M, Westenbrink E, Covington JA, Crawford JB, Hand M, Walker D, Thomas PA, Banerjee D, Adriaens A (2014b) Time-lapse synchrotron X-ray diffraction to monitor conservation coatings for heritage lead in atmospheres polluted with oak-emitted volatile organic compounds. Corros Sci 82:280–289
Grenzing G (2009) The organ building, between research and creation (in Catalan) Memorias de la Real Academia de Ciencias y Artes de Barcelona. Num 1020, vol LXIV, num 3 (www.grenzing.com/pdf/memorias.pdf. Accessed 28 April 2018)
Gug R (1998) Historic and experimental studies on brass used for reed tongues. FOMRHI Quart 41
Guruswamy S (1999) Engineering properties and applications of lead alloys. Marcel Decker, New York
Hachenberg K, Ullwer H (2013) Messing nach dem Galmeiverfahren: Drei Handschriften des 18. Jahrhunderts experimentell erlautert (Brass according to the Galmei method. Three 18th century manuscripts explained experimentally) Hamburg, Disserta
Herrera LK (2009) Physico chemical research of cultural heritage materials using microanalytical methods. Ph D thesis, University of Seville, Spain
Herrera LK, Justo Erbez Á et al (2009) Study of the metallic components of historical organ pipes using synchrotron radiation X ray micro-fluorescence imaging and GIXRD. Anal Bioanal Chem 395(7):1969–1975
Herrera LK, Durán A, Justo Erbez Á (2011) Synchroton radiation experiments in Spanish cultural heritage baroque materials: an overview. Coalition Electron Newsl 21:14–16
Hjelt (1892) cited by Gilberg M (1991) History of tin pest, the museum disease. AICCM Bull 17(1&2):3–20
Homer CE, Watkins HC (1942) Transformation of tin at low temperatures. Metal Ind LX:22
Hoyer H (1999) Werkstoffe und Zulieferteile fur den Musikinstrumentenbau: Teil B, Blasinstrumentenbau, (Materials and components for musical instrument making Part B. Wind instruments) Frankfurt am Main, Bochinsky
Huber TM, Collins BA, Pineda M, Hendrickson C (2003) Vibrational modes of the reed in a treed organ pipe. Acoust Soc Am 114:2348
Huber TM, Fatemi M, Kinnick R, Greenleaf J (2006) Noncontact modal analysis of a pipe organ reed using airborne ultrasound stimulated vibrometry. J Acoust Soc Am 119(4):2476–2482
Justo-Estebaranz A, Herrera LK, Duran A, Sigüenza B, de Haro MCJ, Laguna O, Justo A (2012) Analysis of the restoration of an historical organ: The case study of the Cavaillé-Coll organ of La Merced Church in Burgos, Spain. Stud Conserv 57(1):21–28
Kariya Y, Gagg C, Plumbridge W (2000) Tin pest in lead-free solders. Soldering Surf Mount Techn 13(1):39–40
Kausel W (2010) Influence of wall vibration on the sound of brass wind instrument. J Acoust Soc Am 128(5):3161–3174
Kontozova-Deutsch V (2007) Characterization of indoor gaseous and particulate pollutants for conservation in museums and churches. PhD thesis, University Antwerpen, Belgium
Lasky RC (2004) Tin pest: a forgotten issue in lead free soldering. In: 2004 SMTA international conference proceedings, Chicago, IL, pp 838–840
Laukhuff HE (1988) Ageing of tin alloys in organ pipes. ISO Int Soc Organbuilders J 1:46–56
Lietzmann KD, Hensel A, Schlegel J (1984) Metallformung Geschichte Kunst, Technik. Metal forming history, art, technology. Dusseldorf, Verlag Stahleisen
Lihl F (1953) Amalgams of Manganese, Iron, Cobalt, Nickel, and Copper. Z. Metallk, 44:160
Lihl F, Nowotny H (1953) Die Struktur von Ni Hg 4. Zeitschrift Fur Metallkunde 44(8):359–359
Manescu A, Giuliani A, Fiori F, Baretzky B (2006) Residual stress analysis in reed pipe brass tongues of historic organs. Mater Sci Forum 524:969–974
Mapelli C, Nicodemi W, Venturini R (2005) Characterization of damaging phenomena interesting tin-based organ pipes of different ages. Revue de Métallurgie 102(2):153–159
Mauck CM, van den Heuvel TW, Hull MM, Zeller M, Oertel CM (2010) Synthesis and structures of Pb3O2 (CH3COO)2·0.5 H2O and Pb2O (HCOO) 2: two corrosion products revisited. Inorg Chem 49:10736–10743
Miklos A, Angster J, Titsch S, Rossing T (2003) Reed vibration in lingual organ pipes without the resonators. J Acoust Soc Am 113(2):1081–1091
Muñoz-Paez A, Herrera L K, Justo A, Sans JA, Martinez-Criado G (2011) Study of metallic pieces from the Andalusian baroque period with micro X-ray diffraction and micro X-ray fluorescence. In: Diamond light source proceedings (SRMS-7), vol 1, p e127
Niklasson A (2007) Atmospheric corrosion of historic lead organ pipes. Chalmers University of Technology, Thesis
Niklasson A, Johansson LG, Svensson JE (2004) Atmospheric corrosion of historical organ pipes: influence of acetic and formic acid vapours and water leaching on lead. In: Proceedings of the triennial metals conservation conference (METAL’04), pp 273–280
Niklasson A, Johansson L G, Svensson J E (2005) Influence of acetic acid vapor on the atmospheric corrosion of lead. J Electrochem Soc 15:B519–B525
Nödl K (1970) Metallblaisinstrumentenbau (Metal wind instruments): Fach-u. Lehrbuch uber d. Herstellung von Metallblasinstrumenten. Bearb. von e. Team von Fachleuten. Frankfurt am Main, Das Musikinstrument
Noyan IC, Cohen JB (2013) Residual stress: measurement by diffraction and interpretation. Springer, Berlin
Plitnik (2000) Vibrational characteristics of pipe organ reed tongues and the effect of shallot, resonator and, reed curve. J Acoust Soc Am 107(6): 3460–3473
Plumbridge WJ (2007) Tin pest in electronics? Circuit World 33(1):9–14
Plumbridge WJ (2008) Recent observations on tin pest formation in solder alloys. J Electron Mater 37(2):218–223
Plumbridge WJ (2010) Further observations on tin pest formation in solder alloys. J Electron Mater 39(4):433–440
Rocca E, Rapin C, Mirambet F (2004) Inhibition treatment of the corrosion of lead artefacts in atmospheric conditions and by acetic acid vapour: use of sodium decanoate. Corros Sci 46:653–665
Rossing TD, Angster J, Miklós A (1998) Reed vibration and sound generation in lingual organ pipes. J Acoust Soc Am 104(3):1767–1768
Stokes E (1992) The protection of pipe organ against fire. Organ Hist Trust Austr J 8–10
Tétreault J, Sirois E, Stamatopoulou E (1998) Studies of lead corrosion in acetic acid environments. Stud Conserv 43(1):17–32
Tétreault J, Cano E, van Bommel M, Scott D et al (2003) Corrosion of copper and lead by formaldehyde, formic and acetic acid vapours. Stud Conserv 48(4):237–250
Uhlig H H (2011) In: Winsoan Revie R (ed) Uhlig’s corrosion handbook, vol 51, 3rd edn. Wiley, New York
van der Heide GJ (1991) Brass instrument metalworking: the bronze age to industrial revolution. Historic Brass Soc J 3:122–150
Vereecke H (2016) The sixteenth century trombone. Dimensions, materials and techniques. Belgium Brepols Publishers, Turnhout
Vilarinho C, Davim JP (2005) Influence of the chemical composition on the machinability of brasses. J Mater Process Techn 170(1–2):441–447
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Bucur, V. (2019). Degradation of Organ Pipes and of Brass Instruments. In: Handbook of Materials for Wind Musical Instruments . Springer, Cham. https://doi.org/10.1007/978-3-030-19175-7_18
Download citation
DOI: https://doi.org/10.1007/978-3-030-19175-7_18
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-19174-0
Online ISBN: 978-3-030-19175-7
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)