Skip to main content
SpringerLink
Log in
SpringerLink
Log in

A Comparison of Production Time Calculation Methods for Customized Products Manufacturing

  • Conference paper
  • First Online:
Advances in Manufacturing II (MANUFACTURING 2019)

Part of the book series: Lecture Notes in Mechanical Engineering ((LNME))

Included in the following conference series:

Abstract

One of the most important challenge for manufacturers of customized products is calculation of the production time. Choosing the right method of that calculation is the key of correct determining production plans and delivery dates for customers. The reason is, among other issues, the lack of real data on standard times required to complete individual manufacturing operations or processes. This article presents comparison of most common production time estimating methods, known from the literature: knowledge-based estimation, predictive analytics and statistical learning methods. These methods were adopted for the simulated production process and compared in terms of the accuracy of the calculated times, compared to the real times achieved by the research groups in the simulation.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 84.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 109.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Ivanov, D., Dolgiu, A., Sokolov, B., Werner, F., Ivanova, M.: A dynamic model and an algorithm for short-term supply chain scheduling in the smart factory industry 4.0. Int. J. Prod. Res. 54(2), 386–402 (2016)

    Article  Google Scholar 

  2. Górski, F., Zawadzki, P., Hamrol, A.: Knowledge based engineering as a condition of effective mass production of configurable products by design automation. J. Mach. Eng. 16, 5–30 (2016)

    Google Scholar 

  3. Seitza, K.-F., Nyhuisa, P.: Cyber-physical production systems combined with logistic models – a learning factory concept for an improved production planning and control. Procedia CIRP 32, 92–97 (2015). The 5th Conference on Learning Factories 2015

    Article  Google Scholar 

  4. Zhang, Y., Xie, F., Dong, Y., Yang, G., Zhou, X.: High fidelity virtualization of cyber-physical systems. Int. J. Model. Simul. Sci. Comput. 4(02), 1340005 (2013)

    Article  Google Scholar 

  5. Shrouf, F., Ordieres, J., Miragliotta, G.: Smart factories in industry 4.0: a review of the concept and of energy management approached in production based on the Internet of Things paradigm. In: 2014 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE (2014)

    Google Scholar 

  6. Żywicki, K., Zawadzki, P., Hamrol, A.: Preparation and production control in smart factory model. In: Rocha, Á., Correia, A., Adeli, H., Reis, L., Costanzo, S. (eds.) Recent Advances in Information Systems and Technologies. WorldCIST 2017. Advances in Intelligent Systems and Computing, vol. 571. Springer, Cham (2017)

    Google Scholar 

  7. APICS Illustrated Dictionary, An Interactive, Illustrated Guide to Supply Chain Language and Concepts, XI edn. APICS Dictionary (2017)

    Google Scholar 

  8. Piłacińska, M.: Representation of multi-variant product structures in the database. Logistyka 2, CD–CD (2009)

    Google Scholar 

  9. Żywicki, K., Zawadzki, P.: Fulfilling individual requirements of customers in smart factory model. In: Hamrol, A., Ciszak, O., Legutko, S., Jurczyk, M. (eds.) Advances in Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Cham (2018)

    Google Scholar 

  10. Verhagen, W.J.C., Bermell-Garcia, P., Van Dijk, R.E.C., Curran, R.: A critical review of knowledge-based engineering: an identification of research challenges. Adv. Eng. Inform. 26(1), 5–15 (2012)

    Article  Google Scholar 

  11. Kutschenreiter-Praszkiewicz, I.: Methodology of planning the course of technical work preparing the production of machine elements, Ph.D. thesis, Bielsko-Biała (1999)

    Google Scholar 

  12. Kingsman, B.G., de Souza, A.A.: A knowledge-based decision support system for cost estimation and pricing decisions in versatile manufacturing companies. Int. J. Prod. Econ. 53(2), 119–139 (1997)

    Article  Google Scholar 

  13. Dolgui, A., Ould-Louly, M.-A.: A model for supply planning under lead time uncertainty. Int. J. Prod. Econ. 78(2), 145–152 (2002)

    Article  Google Scholar 

  14. Choi, J.W., Kelly, D., Raju, J., Reidsema, C.: Knowledge-based engineering system to estimate manufacturing cost for composite structures. J. Aircr. 42(6), 1396–1402 (2005)

    Article  Google Scholar 

  15. Varela, M., Trojanowska, J., Carmo-Silva, S.: Comparative simulation study of production scheduling in the hybrid and the parallel flow. Manag. Prod. Eng. Rev. 8(2), 69–80 (2018)

    Google Scholar 

  16. Trojanowska, J., Varela, M.L.R., Machado, J.: The tool supporting decision making process in area of job-shop scheduling. In: Rocha, Á., Correia, A., Adeli, H., Reis, L., Costanzo, S. (eds.) Recent Advances in Information Systems and Technologies. WorldCIST 2017. Advances in Intelligent Systems and Computing, vol. 571. Springer, Cham (2017)

    Google Scholar 

  17. Ivanov, D., Dolgui, A., Sokolov, B.: A dynamic approach to multi-stage job shop scheduling in an industry 4.0-based flexible assembly system. In: Lödding, H., Riedel, R., Thoben, K.D., von Cieminski, G., Kiritsis, D. (eds.) Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing. APMS 2017. IFIP Advances in Information and Communication Technology, vol. 513. Springer, Cham (2017)

    Chapter  Google Scholar 

  18. Kujawińska, A., Diering, M., Rogalewicz, M., et al.: Soft modelling-based methodology of raw material waste estimation. In: Intelligent Systems in Production Engineering and Maintenance (ISPEM 2017). Advances in Intelligent Systems and Computing, vol. 637, pp. 407–417 (2018)

    Google Scholar 

  19. Kaihara, T., Kokuryo, D., Fujii, N., Hirai, K.: A proposal of production scheduling method considering users’ demand for mass customized production. In: Lödding, H., Riedel, R., Thoben, K.D., von Cieminski, G., Kiritsis, D. (eds.) Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing. APMS 2017. IFIP Advances in Information and Communication Technology, vol. 513. Springer, Cham (2017)

    Chapter  Google Scholar 

  20. Batóg, J., Gazińska, M., Mojsiewicz, M.: Econometric normalization of individual work efficiency. Przegląd Statystyczny 49, 79–89 (2002)

    Google Scholar 

  21. Matuszek, J., Kaspere, T.: Rationalization of retooling times of work stations. Zeszyty Naukowe Politechniki Śląskie, Gliwice (2014)

    Google Scholar 

  22. Mehrsai, A., Figueira, G., Santos, N., Amorim, P., Almada-Lobo, B.: Decentralized vs. centralized sequencing in a complex job-shop scheduling. In: Lödding, H., Riedel, R., Thoben, K.D., von Cieminski, G., Kiritsis, D. (eds.) Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing. APMS 2017. IFIP Advances in Information and Communication Technology, vol. 513. Springer, Cham (2017)

    Chapter  Google Scholar 

  23. Pająk, E., Cieślak, R.: Application of methods of work time regulation in the process of spindle assembly in a numerically controlled milling machine. Technologia Automatyzacja Montaż 3(3), 24–29 (2013)

    Google Scholar 

  24. Kuhlang, P., Edtmayr, T., Sihn, W.: Methodical approach to increase productivity and reduce lead time in assembly and production-logistic processes. CIRP J. Manufact. Sci. Technol. 4(1), 24–32 (2011)

    Article  Google Scholar 

Download references

Acknowledgments

The presented results of the research, carried out under the theme No. 02/23/DSMK/7723, were funded with grants for education allocated by the Ministry of Science and Higher Education in Poland.

Author information

Authors and Affiliations

  1. Chair of Management and Production Engineering, Poznan University of Technology, Poznań, Poland

    Krzysztof Żywicki & Filip Osiński

Authors
  1. Krzysztof Żywicki
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Filip Osiński
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Filip Osiński .

Editor information

Editors and Affiliations

  1. Poznan University of Technology, Poznan, Poland

    Adam Hamrol

  2. Poznan University of Technology, Poznan, Poland

    Agnieszka Kujawińska

  3. Universidad de las Américas de Puebla, Puebla, Mexico

    Manuel Francisco Suarez Barraza

Rights and permissions

Reprints and permissions

Copyright information

© 2019 Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Żywicki, K., Osiński, F. (2019). A Comparison of Production Time Calculation Methods for Customized Products Manufacturing. In: Hamrol, A., Kujawińska, A., Barraza, M. (eds) Advances in Manufacturing II. MANUFACTURING 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-18789-7_11

Download citation

  • DOI: https://doi.org/10.1007/978-3-030-18789-7_11

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-030-18788-0

  • Online ISBN: 978-3-030-18789-7

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation