Abstract
The article describes in a review and debatable way a trend that can be seen in modern industry, also known as the fourth industrial revolution or Industry 4.0. After years of dynamic development of additive techniques from polymeric, composite, ceramic and metal materials, it can be noticed that these techniques have penetrated into the modern production reality. In particular, it is used by such industries as space, air, automotive, precision, power, electronics and the medical industry. The article focuses on the answer to the question contained in the title. In almost all applications of metal additive manufacturing, further processing is necessary in order to obtain the correct shape and/or geometry accuracy. So there is a phenomenon of repeated interest in an accurate, often multi-axis, substractive machining. The more problematic machining, the more it is used in machining of elements with the so-called free forms resulting even from optimizing the topology of additively manufactured metal elements. The methods of metal additive manufacturing allow to obtain a geometry that until now was impossible to achieve using conventional methods, and generates additional technological problems in substractive machining. The answer to the somewhat rhetorical question contained in the title of the article is self-evident, and it is confirmed by observations from industry events and literature reports related to classical and hybrid additive-substractive machining methods.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Dilberoglu, U.M., Gharehpapagh, B., Yaman, U., Dolen, M.: The role of additive manufacturing in the era of industry 4.0. Procedia Manufact. 11, 545–554 (2017)
Królikowski, M.A., Krawczyk, M.B.: Metal cutting as an integral process of metal additive manufacturing in industry 4.0 (in Polish). Mechanik (8–9), 769–771 (2018)
Liu, Y., Xu, X.: Industry 4.0 and cloud manufacturing: a comparative analysis. J. Manufact. Sci. Eng. 139(3), 1–8 (2016)
Thompson, M.K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R.I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., Martina, F.: Design for additive manufacturing: trends, opportunities, considerations, and constraints. CIRP Ann. Manufact. Technol. 65(2), 737–760 (2016)
https://www.ingwb.com/insights/research/3d-printing-a-threat-to-global-trade. Access 16 Mar 2018
Huang, Y., Leu, M.C., Mazumder, J., Donmez, A.: Additive manufacturing: current state, future potential, gaps and needs, and recommendations. J. Manufact. Sci. Eng. 137(1), pp. 014501–014501-8 (2015)
Attaran, M.: The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing. Bus. Horiz. 60(5), 677–688 (2017)
Sames, W.J., List, F.A., Pannala, S., Dehoff, R.R., Babu, S.S.: The metallurgy and processing science of metal additive manufacturing. Int. Mater. Rev. 61(5), 1–46 (2016)
Pan, Z., Ding, D., Wu, B., Cuiuri, D., Li, H., Norrish, J.: Arc welding processes for additive manufacturing: a review. In: Chen, S., Zhang, Y., Feng, Z. (eds.) Transactions on Intelligent Welding Manufacturing. Springer, Singapore (2017)
Yilmaz, O., Ugla, A.A.: Microstructure characterization. Int. J. Adv. Manufact. Technol. 89(1–4), 13–25 (2017)
Cegielski, P., Skublewska, A., Gawroński, P., Ostrysz, M., Dylewski, M., Gajowniczek, M.: Robotized 3D printing of the machines parts with welding methods. Weld. Technol. Rev. 89(1), 35–42 (2017). (in Polish)
Wang, F., Williams, S., Colegrove, P., Antonysamy, A.A.: Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4 V. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 44(2), 968–977 (2013)
Szost, B.A., Terzi, S., Martina, F., Boisselier, D., Prytuliaka, A., Pirlin, T., Hofmanne, M., Jarvisa, D.J.: A comparative study of additive manufacturing techniques: residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4 V components. Mater. Des. 89, 559–567 (2016)
Frazier, W.E.: Metal additive manufacturing: a review. J. Mater. Eng. Perform. 23(6), 1917–1928 (2014)
Mannion, B., Heinzman, J.: Plasma arc welding brings better control. Tooling Prod. 5, 29–30 (1999)
Williams, S.W., Martina, F., Addison, A.C., Ding, J., Pardal, G., Colegrove, P.: Wire + arc additive manufacturing. Mater. Sci. Technol. (U. K.) 32, 641–647 (2016)
Ding, D., Pan, Z., Cuiuri, D., Li, H.: Wire-feed additive manufacturing of metal components: technologies, developments and future interests. Int. J. Adv. Manufact. Technol. 81(1–4), 465–481 (2015)
Zhan, Y.M., Chen, Y., Li, P., Male, A.T.: Weld deposition-based rapid prototyping: a preliminary study. J. Mater. Process. Technol. 135(2–3), 347–357 (2003)
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., Norrish, J.: A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. J. Manufact. Process. 35, 127–139 (2018)
Weng, F., Chen, Ch., Yu, H.: Research status of laser cladding on titanium and its alloys: a review. Mater. Des. 58, 412–425 (2014)
Szost, B.A., Terzi, S., Martina, F., Boisselier, D., Prytuliak, A., Pirling, T., Hofmann, M., Jarvis, D.J.: A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components. Mater. Des. 89, 559–567 (2016)
Gong, H., Snelling, D., Kardel, K., Carrano, A.L.: Comparison of stainless steel 316L parts made by FDM- and SLM-based additive manufacturing processes. JOM: J. Miner. Metals Mater. Soc. (2018). https://doi.org/10.1007/s11837-018-3207-3
Królikowski, M., Filipowicz, K.: Verification of geometrical accuracy of selective laser melting (SLM) built model. Adv. Manufact. Sci. Technol. 37, 85–91 (2013)
Frank, M.C., Harrysson, O., Wysk, R.A., Chen, N., Srinivasan, H., Hou, G., Keough, C.: Direct additive subtractive hybrid manufacturing (DASH) – an out of envelope method, solid freeform fabrication. In: Proceedings of the 28th Annual International, Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, Austin, TX (2017)
Manogharan, G., Wysk, R., Harrysson, O., Aman, R.: AIMS- a metal additive-hybrid manufacturing system: system architecture and attributes. Procedia Manufact. 1, 273–286 (2015)
Flynn, J.M., Shokrani, A., Newman, S.T., Dhokia, V.: Hybrid additive and subtractive machine tools – research and industrial developments. Int. J. Mach. Tools Manufact. 101, 79–101 (2016)
Simons, M.: Additive manufacturing—a revolution in progress? Insights from a multiple case study. Int. J. Adv. Manufact. Technol. 96(1–4), 735–749 (2018)
Strong, D., Kay, M., Conner, B., Wakefield, T., Manogharan, G.: Hybrid manufacturing – integrating traditional manufacturers with additive manufacturing (AM) supply chain. Addit. Manufact. 21, 159–173 (2018)
Frank, M., Harrysson, O., Wysk, R., Chen, N., Srinivasan, H., Hou, G., Keough, C.: A Method for Integrating Additive and Subtractive Operations for Metal Parts – Direct Additive Subtractive Hybrid Manufacturing (DASH), Conference Tools for Materials Science & Technology 2017
Stavropoulos, P., Foteinopoulos, P., Papacharalampopoulos, A., Bikas, H.: Addressing the challenges for the industrial application of additive manufacturing: towards a hybrid solution. Int. J. Lightweight Mater. Manufact. 1(3), 157–168 (2018)
Kapil, S., Legesse, F., Kumar, R., Karunakaran, K.P.: Hybrid layered manufacturing of turbine blades. Mater. Today Proc. 4(8), 8837–8847 (2017)
Kendrick, B.A., Dhokia, V., Newman, S.T.: Strategies to realize decentralized manufacture through hybrid manufacturing platforms. Robot. Comput.-Integr. Manufact. 43, 68–78 (2017)
Jones, J., McNutt, P., Tosi, R., Perry, C., Wimpenny, D.: Remanufacture of turbine blades by laser cladding, machining and in-process scanning in a single machine. In: Proceedings from the 23rd Annual International Solid Freeform Fabrication Symposium (2012)
Kerbrat, O., Mognol, P., Hascoet, J.-Y.: A new DFM approach to combine machining and additive manufacturing. Comput. Ind. 62, 684–692 (2011)
Du, W., Bai, Q., Zhang, B.: A novel method for additive/subtractive hybrid manufacturing of metallic parts. Procedia Manufact. 5, 1018–1030 (2016)
Raport: Hybrid additive manufacturing machines – global industry analysis, size, share, growth, trends and forecast, 2018–2026. www.transparencymarketresearch.com/hybrid-additive-manufacturing-machines-market.html. Access: 16 Sept 2018
Acknowledgments
Authors want to thank the Activ Reha Med Company for support.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Królikowski, M.A., Krawczyk, M.B. (2019). Does Metal Additive Manufacturing in Industry 4.0 Reinforce the Role of Substractive Machining?. In: Trojanowska, J., Ciszak, O., Machado, J., Pavlenko, I. (eds) Advances in Manufacturing II. MANUFACTURING 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-18715-6_13
Download citation
DOI: https://doi.org/10.1007/978-3-030-18715-6_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-18714-9
Online ISBN: 978-3-030-18715-6
eBook Packages: EngineeringEngineering (R0)