Abstract
In the paper, dynamic calibration of air gauges with small chambers is discussed. Proposed sine input test rig is described, and its uncertainty is evaluated. Three main sources of uncertainty are identified as a Mechanical Unit, Pneumatic Unit and Digital Unit. Type B uncertainty estimation is considered, and the most difficult to assess sources are pointed out. Namely, it is the fluctuation of the back-pressure due to the airflow inside the air gauge. Thus, it was proposed to estimate the Type A uncertainty through the repetitions of the time constant measurement. The results provided highly satisfactory level of expanded uncertainty ca. 0.001 s. This result is covering all factors of influence on the dynamic calibration result.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Koenig B (2017) Marriage of convenience. Manuf Eng 158(3):59–63
Rao PS, Jain PK, Dwivedi DK (2017) Optimization of key process parameters on electro chemical honing (ECH) of external cylindrical surfaces of titanium alloy Ti 6Al 4V. Mater Today Proc 4(2 Part A):2279–2289
Zhang Z, Liu H, Yu Zh, et al. (2017) Biomimetic upper limb mechanism of humanoid robot for shock resistance based on viscoelasticity. In: Proceedings of 2017 IEEE-RAS 17th international conference on humanoid robotics (humanoids), pp 637–642
Grandy D, Koshy P, Klocke F (2009) Pneumatic non-contact roughness assessment of moving surfaces. CIRP Ann Manuf Technol 58(1):515–518
Liu J, Pan X, Wang G, Chen A (2012) Design and accuracy analysis of pneumatic gauging for form error of spool valve inner hole. Flow Meas Instrum 23:26–32
Rucki M, Jermak CzJ (2012) Dynamic properties of small chamber air gages. J Dyn Syst Meas Contr 134(1):011001 (6 pages)
Gao RD, Tang X, Gordon G, Kazmer DO (2014) Online product quality monitoring through in-process measurement. CIRP Ann Manuf Technol 63(1):493–496
Milo MW, Roan M, Harris B (2015) A new statistical approach to automated quality control in manufacturing processes. J Manuf Syst 36:159–167
Chen M, Wang Ch, An Q, Ming W (2018) Tool path strategy and cutting process monitoring in intelligent machining. Front Mech Eng 13(2):232–242
Brosed FJ, Zaera AV, Padilla E, Cebrian F, Aguilar JJ (2018) In-process measurement for the process control of the real-time manufacturing of tapered roller bearings. Materials 11(8):1371 (17 pages)
Jermak CzJ, Rucki M (2012) Air gauging: static and dynamic characteristics. IFSA, Barcelona
European Co-operation for Accreditation (2013) EA-4/02 M: 2013 evaluation of the uncertainty of measurement in calibration
Theodoro F, Reis M, d’Souto C, Barros E (2016) Measurement uncertainty of a pressure sensor submitted to a step input. Measurement 88:238–247
Jermak C, Jakubowicz M, Derezynski J, Rucki M (2017) Uncertainty of the air gauge test rig. Int J Precis Eng Manuf 18(4):479–485
Figliola RS, Beasley DE (2011) Theory and design for mechanical measurements, 5th edn. Wiley, Hoboken
BIPM/JCGM 100:2008 (2008) Evaluation of measurement data – guide to the expression of uncertainty of measurement, Joint Committee for Guides in Metrology BIPM
Theodoro F, Reis M, d’Souto C, Barros E (2018) An overview of the dynamic calibration of piezoelectric pressure transducers. J Phys Conf Ser 975:012002 (5 pages)
Dietrich E, Schulze A (2010) Statistical procedures for machine and process qualification. Hanser Publications, Cincinnati
Rucki M, Barisic B (2009) response time of air gauges with different volumes of the measuring chambers. Metrol Meas Syst 16(2):289–298
Jermak C, Rucki M, Jakubowicz M (2018) Air gauge back-pressure uncertainty estimation for the advanced test rig. Int J Mater Prod Technol 57(4):274–286
Jakubowicz M, Rucki M, Varga G, Majchrowski R (2018) Influence of the inlet nozzle diameter on the air gauge dynamics. In: Advances in manufacturing. Lecture notes in mechanical engineering. Springer, pp 733–743
Breitinger R (1969) Fehlerquellen beim pneumatischen Längenmessen. Dissertation, TU, Stuttgart (in German)
Rabinovich SG (2018) Evaluating measurement accuracy: a practical approach, 3rd edn. Springer, Cham
Soboczyński RJ (1978) Research on metrological properties of pneumatic high-pressure devices. Dissertation, Wroclaw University of Technology, Wrocławska (in Polish)
Domanska A (2011) Uncertainty of the analog to digital conversion result. In: Fotowicz P et al (eds) Measurement Uncertainty: Theory and Practice. GUM, Warsaw, pp 22–31 (in Polish)
Jermak CzJ (2017) Discussion on flow-through phenomena in the air gauge cascade. Acta Mechanica et Automatica 11(1):38–46
Acknowledgments
The research work reported here was performed under the subject of No. 02/22/DSPB/1432, funded with grants for education allocated by the Ministry of Science and Higher Education in Poland.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Jakubowicz, M., Rucki, M., Babic, M. (2019). Uncertainty of Sine Input Calibration Apparatus for the Air Gauges. In: Diering, M., Wieczorowski, M., Brown, C. (eds) Advances in Manufacturing II. MANUFACTURING 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-18682-1_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-18682-1_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-18681-4
Online ISBN: 978-3-030-18682-1
eBook Packages: EngineeringEngineering (R0)