Abstract
In this experimental work, possible solutions to the problem of damage to the impeller of the centrifugal (radial) fan are provided. Due to the impact of the impeller, a breakdown (damage) of the casing occurred, and then to the bending of the shaft of the fan assembly. In the first part of the paper, as a proposal of the solution, the reconstruction of the axle mounting on the basis of the installation of double bearings of the same type and the structural change of the blades of the rotor was done. In the second part, the process of reconstructing the impeller of the fan with modified production technology was worked out to solve the problem of balancing the mass. The study defines the methodology to be followed through the design documentation and the Instructions on the assembly process, which must be strictly observed. By complying with the prescribed technological procedure, the lifetime of the fan will undoubtedly be prolonged.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bubanja, M., Markus, M.M., Đukanović, M., Vujović, M.: Robot for cleaning ventilation ducts. University of Montenegro Podgorica, Montenegro
Karabegović, I., Mirza, R.: Automation of the welding process by use of industrial robots. University of Bihać, Bosnia and Herzegovina, University of Engineering and Technology, Lahore, Pakistan
Husak, E., Haskić, E.: Analysis for torsional vibration of the engine connected with propeller through pair of gears. University of Bihać, Bihać, Bosnia and Herzegovina
Doleček, V., Karabegović, I.: Roboti u industriji, Bihać. Društvo za robotiku Bosna i Hercegovina, Tehnički fakultet Bihać (2008)
Maintenance book and instructions for monitors parts # 1 “Molins Super 9”, England
Book of maintenance and repair of spare parts # 2 “Molins Super 9”, England M
Ristić, B.: Pumps and Fans. Scientific Paper Belgrade, Belgrade (1987)
Academic Thought, Mechanical Manual, Belgrade (2007)
https://www.nabava.net/clanci/saveti/prednosti-i-nedostaci-ventilatora-u-usporedbi-s-klimom-306t6
https://www.nabava.net/clanci/saveti/prednosti-i-nedostaci-vodenog-hladenja-za-pc-777t6
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Krivić, E. (2020). Reconstruction of Vacuum System on Central Fans on Molins Super 9. In: Karabegović, I. (eds) New Technologies, Development and Application II. NT 2019. Lecture Notes in Networks and Systems, vol 76. Springer, Cham. https://doi.org/10.1007/978-3-030-18072-0_58
Download citation
DOI: https://doi.org/10.1007/978-3-030-18072-0_58
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-18071-3
Online ISBN: 978-3-030-18072-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)