Principles of Systemization as a Basis for Designing of Combination Technological Systems

  • Sergiy Kovalevskyy
  • Raul TurmanidzeEmail author
  • Olena Kovalevska
Conference paper
Part of the Lecture Notes in Networks and Systems book series (LNNS, volume 76)


The article deals with the issues of systematization of factors determining the creation of metalworking equipment. The analysis of the basic laws of the existence and development of production systems is carried out. The main requirements for reconstructed production are given. As a result of completing the production program according to priorities, conditions are created for the maximum value of the rate of formation of the final indicator of production efficiency. The incidence matrix, which is constructed for the technological equipment of machine-building shops of machine-building enterprises, is proposed. The matrix takes into account the parametric and structural components of the main and auxiliary equipment of the site of machining and assembly sites of machines. An updated concept of reconfigured production of an appropriate incidence matrix is formulated. The structure of the assembly plant for the conditions of the reconstructed production is shown.


Reconfigured production Mobile machines Production system 


  1. 1.
    Clavel, R.: DELTA, a fast robot with parallel geometry. In: 18th International Symposium on Industrial Robot, Lausanne, pp. 91–100 (1988)Google Scholar
  2. 2.
    Jennings, N., Paratin, P., Jonson, M.: Using intelligent agents to manage business processes. In: Proceedings of the First International Conference (The Practical Application of Intelligent Agents and MultiAgent Technology), London, UK, pp. 345–376 (1996)Google Scholar
  3. 3.
    Kristensen, S., Horstmann, S., Klandt, J., Lohner, F., Stopp, A.: Human-friendly interaction for learning and cooperation. In: Proceedings of the 2001 IEEE International Conference on Robotics and Automation, Seoul, Korea, pp. 2590–2595. IEEE (2001)Google Scholar
  4. 4.
    Merlet, J.-P.: Parallel Robots, p. 394. Springer, New York (2006)zbMATHGoogle Scholar
  5. 5.
    Bushuyev, V.V., Kholshev, I.G.: Mechanisms of a parallel structure in engineering, No. 1, pp. 3–8. STIN (2001)Google Scholar
  6. 6.
    Koltsov, V.A.: Multifunctional Equipment Based on Parallel Kinematics, p. 131. OmSTU, Omsk (2006)Google Scholar
  7. 7.
    Gavrilov, V.A., Koltsov, A.G., Shamutdinov, A.Kh.: Classification of mechanisms for technological machines with parallel kinematics, No. 9, pp. 28–31. STIN (2005)Google Scholar
  8. 8.
    Kovalevsky, S.V., Kovalevsky, O.S., Korzhov, E.O., Kosheva, A.O.: Diagnostics of Technological Systems and Products of Mechanical Engineering (Using Neural Network Approach): Monograph, p. 186. DSEA, Kramatorsk (2016)Google Scholar
  9. 9.
    Kirichenko, A.M.: Conducting to the zone of processing rigidity and compliance of equipment with mechanisms of parallel structure, No. 59, pp. 205–210. Kyiv Polytechnic Institute, Kyiv, (2010)Google Scholar
  10. 10.
    Kuznetsov, Yu.M.: World trends and perspectives of machine tool development in Ukraine, Problems of physical and mathematical and technical education and science of Ukraine in the context of European integration, pp. 45–55. NPU Drahomanova (2007)Google Scholar
  11. 11.
    Kuznetsov, Yu.M., Kryzhanivsky, V.A., Sklyarov, R.A.: Current state, forecasting and prospects of the development of machines with parallel kinematics. In: Processes of Mechanical Processing in Mechanical Engineering, pp. 320–333. ZHDTU (2005)Google Scholar
  12. 12.
    Selivanov, S.G., Guzairov, M.B.: System engineering of innovative production preparation in mechanical engineering. Mech. Eng., 568 (2012)Google Scholar
  13. 13.
    Strutinsky, V.B.: Theoretical analysis of the stiffness of a six-coordinate mechanism of a parallel structure. Bulletin of the National Technical University of Ukraine, Kyiv Polytechnic Institute, No. 57, pp. 198–207 (2009)Google Scholar
  14. 14.
    Strutinsky, S.V.: Determination of the basic structural parameters of spherical support units of the spatial mechanism by the Monte Carlo method. Mach. Sci. 5, 37–43 (2007)Google Scholar
  15. 15.
    Strutinsky, S.V.: Mathematical modeling of spatial cross-angle micro-displacements of spherical hinge using recursive bonds. Mach. Sci. 1, 37–43 (2009)Google Scholar
  16. 16.
    Shamutdinov, A.Kh.: Investigation of classification of multiple-drive mechanisms of parallel kinematics, No. 2, pp. 85–90. Omsk Scientific Herald (2011)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2020

Authors and Affiliations

  • Sergiy Kovalevskyy
    • 1
  • Raul Turmanidze
    • 1
    • 2
    Email author
  • Olena Kovalevska
    • 1
  1. 1.Donbas State Engineering Academy (DSEA)KramatorskUkraine
  2. 2.Department of Production Technologies of Mechanical EngineeringGeorgian Technical University (GTU)TbilisiGeorgia

Personalised recommendations