Abstract
Ultrafine-grained structures (UFGS) are formed after severe plastic deformation (SPD) using the method of vibration-centrifugal hardening (VCH). This method provides greater depth due to the significant mass of the hardening tool. Under optimal conditions, vibration-centrifugal hardening during cold plastic deformation forms an ultrafine-grained ferritic structure with a grain size of 190 nm and high dislocation density and reaches microhardness of 8.9 GPa and a hardening depth of 7 mm on the 40Kh steel surface. The dependence of the corrosion and electrochemical characteristics as well as cavitation erosion damage resistance on the processing modes is shown. However, vibration-centrifugal hardening increases the cavitation erosion damage resistance by two times after stabilizing the destruction rate and by ten times at the incubation time.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Aftanaziv IS, Bassarab AI, Kyryliv YB (2002) Mechanical and corrosion characteristics of 40Kh steel after vibration-centrifugal hardening treatment. Mater Sci 38(3):436–441
Kyryliv V, Kyryliv Y, Sas N (2018) Formation of surface ultrafine grain structure and their physical and mechanical characteristics using vibration-centrifugal hardening. Adv Mater Sci Eng 2018:3152170
Bassarab AI, Zhovnirchuk VM, Tsyrul'nyk OT (2001) Effect of the acid-inhibitor treatment on the resistance of 30Kh GSNA steel to the cavitation-erosion fracture in water. Mater Sci 37(5):820–822
Srinivasan Y., Vedula K. (1989) Mechanisms of combined erosion-corrosion of steels at elevated temperatures. A. Levy Ed. Minerals, Metals and Materials Society, Warrendale
Pirsol I (1972) Cavitation. Mills And Boon Ltd, London
Plesset FJ, Devine RE (1966) Effect of exposure time on cavitation damage. J Basic Eng 68(4):691–705
Singh R, Tiwari SK, Mishra SK (2012) Cavitation erosion in hydraulic turbine components and mitigation by coatings: current status and future needs. J Mater Eng Perform 21:1539–1551
Knapp R.T., Daily J.W., Hammitt F.G. (1970) Cavitation. McGraw-Hill New York
Yabuki A, Noishiki K, Komori K, Matsumura M (2001) The surface behavior of metallic materials during the incubation period of cavitation erosion. ASTMSTP 1339:357–369
Karasyuk YA, Kocherov VI, Benino VV, Galaktionova NL (1977) Relationship between corrosion and erosion factors in the cavitation failure of metals. Mater Sci 12(5):537–540
Hurei IV, Kyryliv VI, Bassarab AI (2004) Erosion resistance of 40kh steel after mechanical-pulse treatment. Mater Sci 40(2):296–301
Nykyforchyn H, Kyryliv V, Maksymiv О (2017) Wear resistance of steels with surface nanocrystalline structure generated by mechanical-pulse treatment. Nanoscale Res Lett 12:150
Kyryliv V, Chaikovs’kyi B, Maksymiv O et al (2016) Contact fatigue of 20KHN3A steel with surface nanostructure. Mater Sci 51:833–838
Gutman E. M. (1998) Mechanochemistry of materials. Cambridge International Science
Ricman RH, McNaughton WP (1990) Correlation of cavitation erosion behavior with mechanical properties of metals. Wear 140:63–82
Nykyforchyn HM, Kyryliv VI, Bassarab AI, Voloshyn VA (2002) Wear resistance of mechanical-pulse treated 40kh steel during abrasive friction and cavitation. Mater Sci 38(6):873–879
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Kyryliv, Y., Kyryliv, V., Sas, N. (2019). Influence of Surface Ultrafine Grain Structure on Cavitation Erosion Damage Resistance. In: Fesenko, O., Yatsenko, L. (eds) Nanocomposites, Nanostructures, and Their Applications. NANO 2018. Springer Proceedings in Physics, vol 221. Springer, Cham. https://doi.org/10.1007/978-3-030-17759-1_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-17759-1_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-17758-4
Online ISBN: 978-3-030-17759-1
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)