Abstract
This paper presents the application of different polynomial flexure hinge contours in one compliant mechanism in order to increase both simultaneously the precision and the stroke of the output motion of compliant mechanisms. The contours of the flexure hinges are optimized in dependency of the required elasto-kinematic properties of the mechanism. This new approach for optimization is described in comparison to the use of identical common hinge contours. Based on previously optimized single polynomial flexure hinges, the validity of proposed guidelines is analyzed for a combination of several flexure hinges in two compliant mechanisms for linear point guidance. The rigid-body models of both mechanisms realize an approximated straight line as output motion. The compliant mechanisms are designed through the rigid-body replacement method and with different polynomial flexure hinges with orders varying from 2 to 16. The multi-criteria optimization is performed by use of non-linear FEM simulations. The derived values for the kinematic output parameters are compared for the ideal model and the optimized compliant mechanism. The results are discussed and conclusions for ongoing research work are drawn.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Gräser, P., Linß, S., Zentner, L., Theska, R.: Design and experimental characterization of a flexure hinge-based parallel four-bar mechanism for precision guides. In: Zentner, L., Corves, B., Jensen, B., Lovasz, E.-C. (Eds.), Microactuators and Micromechanisms, Vol. 45 of Mechanisms and Machine Science, pp. 139–152. Springer International Publishing, Cham. https://doi.org/10.1007/978-3-319-45387-3_13, 2017
Howell, L.L., Midha, A.: A method for the design of compliant mechanisms with small-length flexural pivots. J. Mech. Des. 116, 280–290 (1994). https://doi.org/10.1115/1.2919359
Howell, L.L., Magleby, S.P., Olsen, B.M.: Handbook of Compliant Mechanisms. Wiley, Chichester (2013)
Linß, S., Erbe, T., Zentner, L.: On polynomial flexure hinges for increased deflection and an approach for simplified manufacturing. In: 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, p. A11_512 (2011)
Linß, S., Milojevic, A., Pavlovic, N.D., Zentner, L.: Synthesis of compliant mechanisms based on goal-oriented design guidelines for prismatic flexure hinges with polynomial contours. In: 14th World Congress in Mechanism and Machine Science, Taipei, Taiwan. https://doi.org/10.6567/iftomm.14th.wc.ps10.008 (2015)
Linß, S.: Ein Beitrag zur geometrischen Gestaltung und Optimierung prismatischer Festkörpergelenke in nachgiebigen Koppelmechanismen, doctoral thesis, TU Ilmenau, Ilmenau, urn:nbn:de:gbv:ilm1-2015000283 (2015)
Lobontiu, N.: Compliant Mechanisms: Design of Flexure Hinges. CRC Press, Boca Raton, Fla. (2003)
Tseytlin, Y.M.: Notch flexure hinges: An effective theory. Rev. Sci. Instrum. 73, 3363–3368 (2002). https://doi.org/10.1063/1.1499761
Acknowledgements
The development of this project is supported by the Deutsche Forschungsgemeinschaft (DFG) under Grant No. TH 845/5-2 and ZE 714/10-2.
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Gräser, P., Linß, S., Zentner, L., Theska, R. (2019). Optimization of Compliant Mechanisms by Use of Different Polynomial Flexure Hinge Contours. In: Kecskeméthy, A., Geu Flores, F., Carrera, E., Elias, D. (eds) Interdisciplinary Applications of Kinematics. Mechanisms and Machine Science, vol 71. Springer, Cham. https://doi.org/10.1007/978-3-030-16423-2_25
Download citation
DOI: https://doi.org/10.1007/978-3-030-16423-2_25
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-16422-5
Online ISBN: 978-3-030-16423-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)