Abstract
Increasing demand of clean energy, growth in global population, and tremendous global warming necessitate sustainable energy production. Photochemistry or photocatalysis using semiconductor is one direct way of converting solar light into fuel without CO2 emission. Use of cheap and renewable energy sources like sunlight and water is an efficient way toward green energy generation. Semiconductors like metal oxides and metal sulfides are materials of interest for photocatalysis because of their good optical and electronic properties. However, most of the semiconductors do not have suitable band alignment to absorb sunlight efficiently. In this line, use of metal oxides and sulfides can be an advantageous strategy for desirable band tuning for visible light photocatalysis. In this chapter, we present highlights on metal- and nonmetal-doped metal oxides and sulfides for photocatalysis.
Photocatalysis is an important field for hydrogen production, environment remediation, and electronic manufacturing. Since the introduction of TiO2 as photocatalyst in the late 1960s by Honda and Fujishima, many other semiconductors gained attention due to their good optical, electronic, and photocatalytic properties. To absorb whole solar spectrum, proper VB and CB alignment with respect to water oxidation and reduction potential, respectively, is required for photocatalysis. All semiconductors do not have suitable band gap and band alignment to exhibit efficient or visible light photocatalysis. Metal and nonmetal doping of semiconductors like metal oxides and sulfides can be an effective strategy to push the band gap in the optimum region to be suitable for overall photocatalysis. The present chapter is an attempt to provide a detailed description of various aspects for the development of suitable photocatalyst, i.e., preferred band gap materials, metal doping, nonmetal doping, and challenges associated with them like broad absorption capability and low recombination probability.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Al-Hamdi AM, Rinner U, Sillanpaa M (2017) Tin dioxide as a photocatalyst for water treatment: a review. Process Saf Environ Prot 107:190–205. https://doi.org/10.1016/j.psep.2017.01.022
Asahi R, Morikawa T, Ohwaki T, Aoki K, Taga Y (2001) Visible-light photocatalysis in nitrogen-doped titanium oxides. Science 293(5528):269 LP–269271. Retrieved from http://science.sciencemag.org/content/293/5528/269.abstract
Bousslama W, Elhouichet H, Férid M (2017) Enhanced photocatalytic activity of Fe doped ZnO nanocrystals under sunlight irradiation. Optik Int J Light Electron Opt 134:88–98. https://doi.org/10.1016/j.ijleo.2017.01.025
Di Valentin C, Pacchioni G, Selloni A, Livraghi S, Giamello E (2005) Characterization of paramagnetic species in N-doped TiO2 powders by EPR spectroscopy and DFT calculations. J Phys Chem B 109(23):11414–11419. https://doi.org/10.1021/jp051756t
Dong P, Hou G, Xi X, Shao R, Dong F (2017) WO3-based photocatalysts: morphology control, activity enhancement and multifunctional applications. Environ Sci Nano 4(3):539–557. https://doi.org/10.1039/C6EN00478D
Dutta DP, Ramakrishnan M, Roy M, Kumar A (2017) Effect of transition metal doping on the photocatalytic properties of FeVO4 nanoparticles. J Photochem Photobiol A Chem 335:102–111. https://doi.org/10.1016/j.jphotochem.2016.11.022
Ertis IF, Boz I (2017) Synthesis and optical properties of Sb-doped CdS photocatalysts and their use in methylene blue (MB) degradation. Int J Chem React Eng. https://doi.org/10.1515/ijcre-2016-0102
Fan X, Fan J, Hu X, Liu E, Kang L, Tang C, Li Y (2014) Preparation and characterization of Ag deposited and Fe doped TiO2 nanotube arrays for photocatalytic hydrogen production by water splitting. Ceram Int 40(10, Part A):15907–15917. https://doi.org/10.1016/j.ceramint.2014.07.119
Feng J, Wang Z, Zhao X, Yang G, Zhang B, Chen Z, Huang Y (2018) Probing the performance limitations in thin-film FeVO4 photoanodes for solar water splitting. J Phys Chem C 122(18):9773–9782. https://doi.org/10.1021/acs.jpcc.8b01330
Fu H, Zhang S, Xu T, Zhu Y, Chen J (2008) Photocatalytic degradation of RhB by fluorinated Bi2WO6 and distributions of the intermediate products. Environ Sci Technol 42(6):2085–2091. https://doi.org/10.1021/es702495w
Fujishima A, Honda K (1972) Electrochemical photolysis of water at a semiconductor electrode. Nature 238. https://doi.org/10.1038/238037a0
Gao F (2011) Effects of quantum confinement and shape on band gap of core/shell quantum dots and nanowires. Appl Phys Lett 98(19):193105. https://doi.org/10.1063/1.3590253
Gnanasekaran L, Hemamalini R, Saravanan R, Ravichandran K, Gracia F, Gupta VK (2016) Intermediate state created by dopant ions (Mn, Co and Zr) into TiO2 nanoparticles for degradation of dyes under visible light. J Mol Liq 223:652–659. https://doi.org/10.1016/j.molliq.2016.08.105
Hoffmann MR, Martin ST, Choi W, Bahnemann DW (1995) Environmental applications of semiconductor photocatalysis. Chem Rev 95(1):69–96. https://doi.org/10.1021/cr00033a004
Kim S, Park H, Choi W (2004) Comparative study of homogeneous and heterogeneous photocatalytic redox reactions: PW12O403- vs TiO2. J Phys Chem B 108(20):6402–6411. https://doi.org/10.1021/jp049789g
Kiriakidis G, Binas V (2014) Metal oxide semiconductors as visible light photocatalysts. J Korean Phys Soc 65(3):297–302. https://doi.org/10.3938/jkps.65.297
Klingshirn C, Hauschild R, Fallert J, Kalt H (2007) Room-temperature stimulated emission of ZnO: alternatives to excitonic lasing. Phys Rev B 75(11):115203. https://doi.org/10.1103/PhysRevB.75.115203
Kudo A, Miseki Y (2009) Heterogeneous photocatalyst materials for water splitting. Chem Soc Rev 38(1):253–278. https://doi.org/10.1039/B800489G
Kumar A, Sharma G, Naushad M et al (2014) Polyacrylamide/Ni0.02Zn0.98O nanocomposite with high solar light photocatalytic activity and efficient adsorption capacity for toxic dye removal. Ind Eng Chem Res 53:15549–15560. https://doi.org/10.1021/ie5018173
Kumar A, Kumar A, Sharma G et al (2018) Biochar-templated g-C3N4/Bi2O2CO3/CoFe2O4nano-assembly for visible and solar assisted photo-degradation of paraquat, nitrophenol reduction and CO2 conversion. Chem Eng J. https://doi.org/10.1016/j.cej.2018.01.105
Li Z-X, Shi F-B, Ding Y, Zhang T, Yan C-H (2011) Facile synthesis of highly ordered mesoporous ZnTiO3 with crystalline walls by self-adjusting method. Langmuir 27(23):14589–14593. https://doi.org/10.1021/la2034615
Li J, Zhao W, Guo Y, Wei Z, Han M, He H, Sun C (2015) Facile synthesis and high activity of novel BiVO4/FeVO4 heterojunction photocatalyst for degradation of metronidazole. Appl Surf Sci 351:270–279. https://doi.org/10.1016/j.apsusc.2015.05.134
Linsebigler AL, Lu G, Yates JT (1995) Photocatalysis on TiO2 surfaces: principles, mechanisms, and selected results. Chem Rev 95(3):735–758. https://doi.org/10.1021/cr00035a013
Liu P, Liu Y, Ye W, Ma J, Gao D (2016) Flower-like N-doped MoS 2 for photocatalytic degradation of RhB by visible light irradiation. Nanotechnology 27(22):225403
Liu Y, Feng P, Wang Z, Jiao X, Akhtar F (2017) Novel fabrication and enhanced photocatalytic MB degradation of hierarchical porous monoliths of MoO3 nanoplates. Sci Rep 7(1):1845. https://doi.org/10.1038/s41598-017-02025-3
Manikandan A, Manimegalai DK, Moortheswaran S, Arul Antony S (2015) Magneto-optical and photocatalytic properties of magnetically recyclable MnxZn1−xS (x = 0.0, 0.3, and 0.5) nanocatalysts. J Supercond Nov Magn 28. https://doi.org/10.1007/s10948-015-3089-3
Mishra M, Doo-Man C (2015) α-Fe2O3 as a photocatalytic material: a review. Appl Catal A Gen 498:126–141. https://doi.org/10.1016/j.apcata.2015.03.023
Montini T, Melchionna M, Monai M, Fornasiero P (2016) Fundamentals and catalytic applications of CeO2-based materials. Chem Rev 116(10):5987–6041. https://doi.org/10.1021/acs.chemrev.5b00603
Neren Ökte A, Akalın Ş (2010) Iron (Fe3+) loaded TiO2nanocatalysts: characterization and photoreactivity. React Kinet Mech Catal 100(1):55–70. https://doi.org/10.1007/s11144-010-0168-0
Ong CB, Ng LY, Mohammad AW (2018) A review of ZnO nanoparticles as solar photocatalysts: synthesis, mechanisms and applications. Renew Sust Energ Rev 81:536–551. https://doi.org/10.1016/j.rser.2017.08.020
Parida K, Pany S, Naik B (2013) Green synthesis of fibrous hierarchical meso-macroporous N doped TiO2nanophotocatalyst with enhanced photocatalytic H2 production. Int J Hydrog Energy 38:3545–3553. https://doi.org/10.1016/j.ijhydene.2012.12.118
Polisetti S, Deshpande PA, Madras G (2011) Photocatalytic activity of combustion synthesized ZrO2 and ZrO2–TiO2 mixed oxides. Ind Eng Chem Res 50(23):12915–12924. https://doi.org/10.1021/ie200350f
Rumaiz AK, Woicik JC, Cockayne E, Lin HY, Jaffari GH, Shah SI (2009) Oxygen vacancies in N doped anatase TiO2: experiment and first-principles calculations. Appl Phys Lett 95(26):262111. https://doi.org/10.1063/1.3272272
Saravanan R, Prakash T, Gupta VK, Narayanan V, Stephen A (2013) Synthesis, characterization and photocatalytic activity of novel Hg doped ZnO nanorods prepared by thermal decomposition method. J Mol Liq 178:88–93. http://www.sciencedirect.com/science/article/pii/S0167732212004114
Saravanan R, Gupta VK, Edgar M, Gracia F (2014) Preparation and characterization of V2O5/ZnO nanocomposite system for photocatalytic application. J Mol Liq 198:409–412. http://www.sciencedirect.com/science/article/pii/S0167732214003432
Saravanan R, Khan MM, Gracia F, Qin J, Gupta VK, Stephen A (2016) Ce3+-ion-induced visible-light photocatalytic degradation and electrochemical activity of ZnO/CeO2 nanocomposite. Nat Sci Rep 6:31641. http://www.nature.com/articles/srep31641
Saravanan R, Aviles J, Gracia F, Mosquera E, Vinod KG (2018) Crystallinity and lowering band gap induced visible light photocatalytic activity of TiO2/CS (Chitosan) nanocomposites. Int J Biol Macromol 109:1239–1245. https://www.sciencedirect.com/science/article/pii/S0141813017323450
Sasikala R, Shirole AR, Sudarsan V, Girija KG, Rao R, Sudakar C, Bharadwaj SR (2011) Improved photocatalytic activity of indium doped cadmium sulfide dispersed on zirconia. J Mater Chem 21(41):16566–16573. https://doi.org/10.1039/C1JM12531A
Song H, Li Y, Lou Z, Xiao M, Hu L, Ye Z, Zhu L (2015) Synthesis of Fe-doped WO3 nanostructures with high visible-light-driven photocatalytic activities. Appl Catal B Environ 166–167:112–120. https://doi.org/10.1016/j.apcatb.2014.11.020
Surendar T, Kumar S, Shanker V (2014) Influence of La-doping on phase transformation and photocatalytic properties of ZnTiO3 nanoparticles synthesized via modified sol–gel method. Phys Chem Chem Phys 16(2):728–735. https://doi.org/10.1039/C3CP53855A
Tonda S, Kumar S, Anjaneyulu O, Shanker V (2014) Synthesis of Cr and La-codoped SrTiO3 nanoparticles for enhanced photocatalytic performance under sunlight irradiation. Phys Chem Chem Phys 16(43):23819–23828. https://doi.org/10.1039/C4CP02963A
Urbach F (1953) The long-wavelength edge of photographic sensitivity and of the electronic absorption of solids. Phys Rev 92(5):1324. https://doi.org/10.1103/PhysRev.92.1324
Wang S, Lian JS, Zheng WT, Jiang Q (2012) Photocatalytic property of Fe doped anatase and rutile TiO2 nanocrystal particles prepared by sol–gel technique. Appl Surf Sci 263:260–265. https://doi.org/10.1016/j.apsusc.2012.09.040
Wang L, Wang P, Huang B, Ma X, Wang G, Dai Y, Qin X (2017) Synthesis of Mn-doped ZnS microspheres with enhanced visible light photocatalytic activity. Appl Surf Sci 391:557–564. https://doi.org/10.1016/j.apsusc.2016.06.159
Wei F, Ni L, Cui P (2008) Preparation and characterization of N–S-codoped TiO2 photocatalyst and its photocatalytic activity. J Hazard Mater 156(1):135–140. https://doi.org/10.1016/j.jhazmat.2007.12.018
Xu H, Wu L, Jin L, Wu K (2017) Combination mechanism and enhanced visible-light photocatalytic activity and stability of CdS/g-C3N4 heterojunctions. J Mater Sci Technol 33(1):30–38. https://doi.org/10.1016/j.jmst.2016.04.008
Yang F, Yan N-N, Huang S, Sun Q, Zhang L-Z, Yu Y (2012) Zn-doped CdS nanoarchitectures prepared by hydrothermal synthesis: mechanism for enhanced photocatalytic activity and stability under visible light. J Phys Chem C 116(16):9078–9084. https://doi.org/10.1021/jp300939q
Yang X, Wang S, Sun H, Wang X, Lian J (2015) Preparation and photocatalytic performance of Cu-doped TiO2 nanoparticles. Trans Nonferrous Metals Soc China 25(2):504–509. https://doi.org/10.1016/S1003-6326(15)63631-7
Yu J, Dai G, Huang B (2009) Fabrication and characterization of visible-light-driven plasmonic photocatalyst Ag/AgCl/TiO2 nanotube arrays. J Phys Chem C 113(37):16394–16401. https://doi.org/10.1021/jp905247j
Zhou Y, Chen G, Yu Y, Feng Y, Zheng Y, He F, Han Z (2015) An efficient method to enhance the stability of sulphide semiconductor photocatalysts: a case study of N-doped ZnS. Phys Chem Chem Phys 17(3):1870–1876. https://doi.org/10.1039/C4CP03736G
Zou Z, Ye J, Sayama K, Arakawa H (2001) Direct splitting of water under visible light irradiation with an oxide semiconductor photocatalyst. Nature 414:625. https://doi.org/10.1038/414625a
Zou F, Jiang Z, Qin X, Zhao Y, Jiang L, Zhi J, Edwards P (2012) Template-free synthesis of mesoporous N-doped SrTiO3 perovskite with high visible-light-driven photocatalytic activity. Chem Commun 48:8514–8516. https://doi.org/10.1039/c2cc33797e
Acknowledgments
We acknowledge the Department of Science and Technology, Science and Engineering Research Board, and Council of Scientific and Industrial Research, New Delhi, India, for providing financial support.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Yadav, P., Dwivedi, P.K., Tonda, S., Boukherroub, R., Shelke, M.V. (2020). Metal and Non-metal Doped Metal Oxides and Sulfides. In: Naushad, M., Rajendran, S., Lichtfouse, E. (eds) Green Photocatalysts. Environmental Chemistry for a Sustainable World, vol 34. Springer, Cham. https://doi.org/10.1007/978-3-030-15608-4_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-15608-4_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-15607-7
Online ISBN: 978-3-030-15608-4
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)