Abstract
The study aimed to present an occupational safety management plan for equipment used in working at heights to guide companies to comply with legislation, and, consequently, reduce the percentage of accidents at heights. First it was conducted a bibliografic review. Afterward, a field research was carried-out in a company leasing equipment for working at heights. A check-list was used to verify the compliance of the studied company with normative items on equipment and control measures. Finally, a quantitative and qualitative analyzes was carried-out, and developed a safety management plan for equipment used in working at heights. The results revealed that neither one sample was in accordance with all the considered items, evidencing that the companies have risks of accident. Finally, the management plan for working at heights and the usage of equipments has an important function of alerting, directing, increasing awareness and guiding companies to comply with the legislation, and can be incorporated into equipment leasing companies, as in companies which have these types of equipments used in working at heights.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
MPS: “Anuário estatístico da Previdência Social”, Ministério da Previdência Social. http://www.previdencia.gov.br/wp-content/uploads/2015/08/AEPS-2015-FINAL.pdf (2015). 13 March 2018
MTE:“Manual de auxílio na interpretação e aplicação da Norma Regulamentadora n. º 35 - Trabalho em altura: NR 35 comentada”, Ministério do Trabalho e Emprego. http://portal.mte.gov.br/data/files/8A7C812D36A2800001382 (2012). 15 Dec 2016
MTE: “Dados da inspeção em segurança e saúde no trabalho”, Ministério do Trabalho e Emprego http://portal.mte.gov.br/ (2010). 15 Dec 2016
OSHA: Construction Focus Four: Fall Hazard, OSHA Directorate of Training and Education. Occupational Safety and Health (2011)
Blazik-Borowa, E., Szer, J.: The analysis of the stages of scaffolding “life” with regard to the decrease in the hazard at building works. J. Arch. Civil Mech. Eng. 15, 516–524 (2015)
Whitaker, S.M., Graves, R.J., James, M., McCann, P.: Safety with access scaffolds: development of a prototype decision aid based on accident analysis. J. Saf. Res. 34, 249–261 (2003)
Saurin, T.A., Guimarães, L.B.M.: Ergonomic assessment of suspended scaffolds. Int. J. Ind. Ergon. 38, 238–246 (2008)
Cutlip, R., Hsiao, H., Garcia, R., Becker, E., Mayeux, A.: A comparison of different postures for scaffold end-frame disassembly. Appl. Ergon. 31, 507–513 (2000)
Barkokebas, Jr., B., Vasconcelos, B., Monteiro, M.M., Macedo, D.R.M., Ramos, A.S.C.: Ensaios não destrutivos por líquido penetrante como ferramenta de auxílio à manutenção preventiva de equipamentos de elevação da construção civil. In: XXX Encontro Nacional de Engenharia de Produção, São Paulo, Brazil (2010)
Halperin, K.M., McCann, M.: An evaluation of scaffold safety at construction sites. J. Saf. Res. 35, 141–150 (2004)
ABNT: Segurança nos andaimes. Associação Brasileira de Normas Técnicas, Brazil (1990)
Vasconcelos, B.: Segurança do trabalho no projeto de arquitetura: Diretrizes para o controle dos riscos de acidentes na fase pós-obra. Pernambuco University, Brazil (2009)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Bastos, S.M.S.L., Vasconcelos, B.M., Parisi, S.A., Zlatar, T., Junior, B.B. (2019). Safety Management Plan for Equipment Used in Working at Heights. In: Arezes, P., et al. Occupational and Environmental Safety and Health. Studies in Systems, Decision and Control, vol 202. Springer, Cham. https://doi.org/10.1007/978-3-030-14730-3_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-14730-3_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-14729-7
Online ISBN: 978-3-030-14730-3
eBook Packages: EngineeringEngineering (R0)