Abstract
In human motion analysis, inverse dynamic solutions are used for the determination of joint reaction forces and net joint torques. This approach requires a full kinematic description, external forces and, most important, accurate anthropometric measures. For the estimation of human body segment parameter values, several methods have been proposed in literature throughout the last 120 years. The paper gives an overview of historical and contemporary methods with a specific focus on approaches based on geometrical models of the human body. Methods for (semi-)automated shape detection, segmentation and calculation of anthropometric dimensions are presented and compared. Body segment parameters of Hatze’s hominoid model can be estimated applying image based or photogrammetric techniques. Results of an evaluation study on 6 subjects (3 male, 3 female) by comparing principal moments of inertia and total body masses are shown. The calculation of body segment inertial parameters from 3D surface scanning techniques has proven to be a fast and accurate method without exposing subjects to radiation. Future developments in application of mobile 3D scanning techniques can be expected to further ease handling and reduce costs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cahouët, V., Martin, L., Amarantini, D.: Static optimal estimation of joint accelerations for inverse dynamics problem solution. J. Biomech. 35(11), 1507–1513 (2002)
Winter, D.: Biomechanics and Motor Control of Human Movement, 4th edn. Wiley, New Jersey (2009)
Rao, G., Amarantini, D., Berton, E., Favier, D.: Influence of body segments’ parameters estimation models on inverse dynamics solutions during gait. J. Biomech. 39(8), 1531–1536 (2006)
Futamure, S., Bonnet, V., Dumas, R., Venture, G.: A sensitivity analysis method for the body segment inertial parameters based on ground reaction and joint moment regressor matrices. J. Biomech. 64, 85–92 (2017)
Cizgin, P., Kornfeind, P., Haßmann, M., Baca, A.: Advancements of methods for fast and accurate estimation of human body segment parameter values. In: Proceedings of the 5th International Congress on Sport Sciences Research and Technology Support, vol. 1, pp. 69–74. icSPORTS. https://doi.org/10.5220/0006439400690074
Braune, W., Fischer, O.: Der Körperschwerpunkt Deutscher Infanteristen. ATI 138 452. National Technical Information Service, Leipzig (1889)
Dempster, W.T.: Space requirements for the seated operator. Wright Air Development Center WADC. Technical report TR-55-159. Wright-Patterson Air Force Base, Dayton (1955)
Clauser, C.E., McConville, J.T., Young, J.W.: Weight, volume and center of mass of segments of the human body. AMRL Technical report. Wright-Patterson Air Force Base, Dayton (1969)
Drillis, R., Contini, R.: Body Segment Parameters. Report No. 1166-03. Office of Vocational Rehabilitation, New York (1966)
Nigg, B.M., Herzog, W.: Biomechanics of the Muskulo-Skeletal System, 2nd edn. Wiley, Chichester (1999)
Durkin, J.L.: Measurement and estimation of human body segment parameters. In: Hong, Y., Bartlett, R. (eds.) Routledge Handbook of Biomechanics and Human Movement Science, pp. 197–213. Routledge, London (2008)
Erdmann, W.S., Kowalczyk, R.: A personalized method for estimating centre of mass location of the whole body based on differentiation of tissues of a multi-divided trunk. J. Biomech. 48(1), 65–67 (2015)
Erdmann, W.S.: Geometric and inertial data of the trunk in adult males. J. Biomech. 30(7), 679–688 (1997)
Zatsiorsky, V., Seluyanov, V., Chugunova, L.: In vivo body segment inertial parameter determination using a gamma-scanner method. In: Berme, N., Cappozzo, A. (eds.) Biomechanics of Human Movement: Applications in Rehabilitation, Sports and Ergonomics, pp. 186–202. Bertec, Worthington (1990)
Durkin, J.L., Dowling, J.J., Andrews, D.M.: The measurement of body segment inertial parameters using dual energy X-ray absorptiometry. J. Biomech. 35(12), 1575–1580 (2002)
Wicke, J., Dumas, G.A., Costigan, P.A.: Trunk density profile estimates from dual X-ray absorptiometry. J. Biomech. 41(4), 861–867 (2007)
Ackland, T., Henson, P., Bailey, D.: The uniform density assumption: its effect upon the estimation of body segment inertial parameters. Int. J. Sports Biomech. 4(2), 146–155 (1988)
Cheng, C.-K., Chen, H.-H., Chen, C.-S., Lee, C.-L., Chen, C.-Y.: Segment inertial properties of Chinese adults determined from magnetic resonance imaging. Clin. Biomech. 15(8), 559–566 (2000)
Rossi, M., Lyttle, A., El-Sallam, A., Benjanuvatra, N., Blanksby, B.: Body segment inertial parameters of elite swimmers using DXA and indirect methods. J. Sports Sci. Med. 12(4), 761–775 (2013)
Bonnet, V., Fraisse, P., Crosnier, A., Gautier, M., González, A., Venture, G.: Optimal exciting dance for identifying inertial parameters of an anthropomorphic structure. IEEE Trans. Rob. 32(4), 1–14 (2016)
Díaz-Rodríguez, M., Valera, A., Page, A., Besa, A., Mata, V.: Dynamic parameter identification of subject-specific body segment parameters using robotics formalism: case study head complex. J. Biomech. Eng. 138(5), 051009 (2016)
Son, J., Ryu, J., Kim, J., Kim, Y.: Determination of inertial parameters using a dynamometer. Bio-Med. Mater. Eng. 24(6), 2447–2455 (2014)
Hanavan, E.P.: A mathematical model of the human body. No. AFIT-GA-PHYS-64-3 Wright-Patterson Air Force Base, Dayton (1964)
Hatze, H.: A model for the computational determination of parameter values of anthropomorphic segments. CSIR Technical report TWISK 79, Pretoria (1979)
Hatze, H.: A mathematical model for the computational determination of parameter values of anthropomorphic segments. J. Biomech. 13(10), 833–843 (1980)
Clarkson, S., Choppin, S., Hart, J., Heller, B., Wheat, J.: Calculating body segment inertia parameters from a single rapid scan using the Microsoft Kinect. In: Proceedings of 3rd International Conference on 3D Body Scanning Technologies, Lugano, Switzerland, 16–17 October (2012)
Clarkson, S., Wheat, J., Heller, B., Choppin, S.: Assessment of a Microsoft Kinect-based 3D scanning system for taking body segment girth measurements: a comparison to ISAK and ISO standards. J. Sports Sci. 34(11), 1006–1014 (2016)
Bragança, S., Arezes, P., Carvalho, M., Ashdown, S.P., Xu, B., Castellucci, I.: Validation study of a Kinect based body imaging system. Work 57(1), 9–21 (2017)
Peyer, K.E., Morris, M., Sellers, W.I.: Subject-specific body segment parameter estimation using 3D photogrammetry with multiple cameras. PeerJ 3, e381 (2015). https://doi.org/10.7717/peerj.831
Stančić, I., Musić, J., Zanchi, V.: Improved structured light 3D scanner with application to anthropometric parameter estimation. Measurement 46(1), 716–726 (2013)
Sheets, A.L., Corazza, S., Andriacchi, T.P.: An automated image-based method of 3D subject-specific body segment parameter estimation for kinetic analyses of rapid movements. J. Biomech. Eng. 132(1), 011004 (2010)
Lu, J.-M., Wang, M.-J.J.: Automated anthropometric data collection using 3D whole body scanners. Expert Syst. Appl. 35, 407–414 (2008)
Jafari Roodbandi, A.S., Naderi, H., Hashenmi-Nejad, N., Choobineh, A., Baneshi, M.R., Feyzi, V.: Technical report on the modification of 3-dimensional non-contact human body laser scanner for the measurement of anthropometric dimensions: verification of its accuracy and precision. J. Lasers Med. Sci. 8(1), 22–28 (2017)
Bogner, M.: Regressionsanalyse anthropometrischer Daten zur Abschätzung von Segmentkonturdimensionen. Master thesis, University of Vienna (1992)
Tscherne, B.: Funktionsanpassungsalgorithmen für Datensequenzen anthropometrischer Dimensionen. Master thesis, University of Vienna (2001)
Baca, A.: Precise determination of anthropometric dimensions by means of image processing methods for estimating human body segment parameter values. J. Biomech. 29(4), 563–567 (1996)
Schiffl, K.: Bestimmung von Hominoidsegmenten aus 3D-Bodyscannerdaten. Master thesis, Technical University Vienna (2011)
Cizgin, P.: Automatisierte Bestimmung anthropometrischer Segmentparameter des Hominoidmodells von Hatze mittels 3D-Laserscantechnologie. Master thesis, Medical University Vienna (2013)
Redlarski, G., Krawczuk, M., Palkowski, A.: Application of 3D whole body scanning in research on human body surface area. In: Book of Abstracts 3DBODY.TECH 2017 8th International Conference and Exhibition on 3D Body Scanning and Processing Technologies, Montreal, Canada, 11–12 October 2017
Hassmann, M., Markl, R., Friedl, N., Friedl, C., Krach, W.: Aerodynamics, EMG and 3D joint angles of different flight configurations of ATOS hang glider and pilot. A case study. In: Czaplicki, A., Wychowański, M., Wit, A. (eds.) International Conference of the Polish Society of Biomechanics 2016, pp. 105–106. Biała Podlaska, Polen (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Baca, A., Hassmann, M., Kornfeind, P., Cizgin, P. (2019). Novel Approaches for Geometrical Model-Based Calculation of Human Body Segment Inertial Parameter Values. In: Cabri, J., Pezarat-Correia, P., Vilas-Boas, J. (eds) Sport Science Research and Technology Support. icSPORTS icSPORTS 2016 2017. Communications in Computer and Information Science, vol 975. Springer, Cham. https://doi.org/10.1007/978-3-030-14526-2_10
Download citation
DOI: https://doi.org/10.1007/978-3-030-14526-2_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-14525-5
Online ISBN: 978-3-030-14526-2
eBook Packages: Computer ScienceComputer Science (R0)