Abstract
The article presents the state-of-the art of tools for prediction of mode I, II and III effective thresholds for metallic materials. The effective threshold is independent of the stress ratio as well as the yield strength and is, therefore, a universal parameter for a particular metal. It can also be also used to separate the effective and crack closure components of resistance to fatigue crack growth. Results of recent research provided relationships for quantification of mode II and mode III effective thresholds for a wide range of metallic materials which are in a good agreement with experiments. The local crack growth mode has to be taken into account which depends on crystal lattice type and secondary phase type. The mode III cracks propagate by local crack front advances under mode I or mode II which was taken into account in numerical calculation of local stress intensity factors. It allowed explanation of the experimentally obtained values of the mode III effective thresholds.
Keywords
This is a preview of subscription content, log in via an institution.
References
Ritchie RO (1988) Mechanisms of fatigue crack propagation in metals, ceramics and composites: Role of crack tip shielding. Mater Sci Eng A 103:15–28
Hertzberg RW (1995) On the calculation of closure-free fatigue-crack propagation data in monolithic metal-alloys. Mater Sci Eng A 190:25–32
Liaw PK, Lea TR, Logsdon WA (1983) Near-threshold fatigue crack growth behavior in metals. Acta Metall 31:1581–1587
Pippan R (1998) The effective threshold of fatigue crack propagation in aluminium alloys. I. The influence of yield stress and chemical composition. Philos Mag A 77:861–873
Riemelmoser FO, Gumbsch P, Pippan R (2001) Dislocation modelling of fatigue cracks: an overview. Mater Trans 42:2–13
Tschegg EK, Stanzl SE (1988) The significance of sliding mode crack closure on mode III fatigue crack growth. Basic questions in fatigue. ASTM STP 924 1:214–232
Vojtek T, Hohenwarter A, Pippan R, Pokluda J (2016) Experimental evidence of a common local mode II growth mechanism of fatigue cracks loaded in modes II, III and II + III in niobium and titanium. Int J Fatigue 92:470–477
Vojtek T, Pippan R, Hohenwarter A, Pokluda J (2017) Prediction of effective mode II fatigue crack growth threshold for metallic materials. Eng Fract Mech 174:117–126
Vojtek T, Hohenwarter A, Pippan R, Pokluda J (2018) Influence of secondary phase on intrinsic threshold and path of shear-mode fatigue cracks in metals. Acta Phys Polonica A 134:699–702
Pokluda J, Pippan R, Vojtek T, Hohenwarter A (2014) Near-threshold behaviour of shear-mode fatigue cracks in metallic materials. Fatigue Fract Engng Mater Struct 37:232–254
Vojtek T, Žák S, Pokluda J (2018) Quantitative analysis of intrinsic mode III fatigue thresholds in bcc metals. Int J Fatigue 115:35–41
Acknowledgements
This work was financially supported by the Czech Science Foundation (GA CR) in the frame of the Project No. 17-15716Y and by the Ministry of Education, Youth and Sports of the Czech Republic under the project CEITEC 2020 (LQ1601).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Vojtek, T., Žák, S., Pokluda, J. (2019). Towards Quantitative Explanation of Effective Thresholds of Mode III Fatigue Crack Propagation in Metals. In: Correia, J., De Jesus, A., Fernandes, A., Calçada, R. (eds) Mechanical Fatigue of Metals. Structural Integrity, vol 7. Springer, Cham. https://doi.org/10.1007/978-3-030-13980-3_21
Download citation
DOI: https://doi.org/10.1007/978-3-030-13980-3_21
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-13979-7
Online ISBN: 978-3-030-13980-3
eBook Packages: EngineeringEngineering (R0)