Abstract
The porosity and bulk density of granular materials are closely related to the issues connected with the transport and storage of this type of materials. The article discusses the basic factors determining porosity and bulk density. Additionally, the influence of the two of these factors (moisture, shape factor) on the obtained values of bulk density and porosity was investigated. Non-linear estimation was performed in order to obtain an influence model of the analyzed factors. With respect to bulk density, the model was well fitted to the input data; yet, for porosity, the goodness-of-fit failed to be satisfactory.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
J.B. Królczyk, Metrological changes in the surface morphology of cereal grains in the mixing process. Int. Agrophys. 30, 193–202 (2016). https://doi.org/10.1515/intag-2015-0090
M. Markowski, K. Żuk-Gołaszewska, D. Kwiatkowskia, Influence of variety on selected physical and mechanical properties of wheat. Ind. Crops Prod. 47, 113–117 (2013)
B. Brzychczyk, T. Hebda, J. Giełżecki, Physical and chemical properties of pellets produced from the stabilized fraction of municipal sewage sludge, in Renewable Energy Sources: Engineering, Technology, Innovation. ed. by K. Mudryk, S. Werle. Springer Proceedings in Energy (Springer, Cham, 2018)
M. Jewiarz, J. Frączek, K. Mudryk, M. Wróbel, K. Dziedzic, Analysis of MSW potential in terms of processing into granulated fuels for power generation, in Renewable Energy Sources: Engineering, Technology, Innovation. ed. by K. Mudryk, S. Werle. Springer Proceedings in Energy (Springer, Cham, 2018)
B. Brzychczyk, T. Hebda, J. Giełżecki, Energy characteristics of compacted biofuel with stabilized fraction of municipal waste, in Renewable Energy Sources: Engineering, Technology, Innovation. eds. by K. Mudryk, S. Werle. Springer Proceedings in Energy (Springer, Cham, 2018)
M. Wróbel, K. Mudryk, M. Jewiarz, S. Głowacki, W. Tulej, Characterization of selected plant species in terms of energetic use, in Renewable Energy Sources: Engineering, Technology, Innovation. eds. by K. Mudryk, S. Werle. Springer Proceedings in Energy (Springer, Cham, 2018)
M. Wróbel, J. Hamerska, M. Jewiarz, K. Mudryk, M. Niemczyk, Influence of parameters of the torrefaction process on the selected parameters of torrefied woody biomass, in Renewable Energy Sources: Engineering, Technology, Innovation. ed. by K. Mudryk, S. Werle. Springer Proceedings in Energy (Springer, Cham, 2018)
M. Niemczyk, A. Kaliszewski, M. Jewiarz, M. Wróbel, K. Mudryk, Productivity and biomass characteristics of selected poplar (Populus spp.) cultivars under the climatic conditions of northern Poland. Biomass Bioenergy 111, 46–51 (2018)
J. Więcek, M. Molenda, J. Horabik, Mechanical properties of Granular agro-materials. Continuum and discrete approach. Acta Agrophysica 190 (2011). Lublin, Poland
J. Frączek, J. Kaczorowski, Z. Ślipek, J. Horabik, M. Molenda, Standardization of measuring methods of the physical and mechanical properties of granular materials. Acta Agrophysica 92 (2003). (in Polish)
A. Wójcik, J. Frączek, The influence of selected factors upon the value of external friction concerning plant granular materials. Tribologia 4, 107–113 (2017)
R. Wąsik, K. Michalec, K. Mudryk, Variability in static bending strength of the “Taborz” scots pine wood (Pinus sylvestris L.). Drewno 59(196), 153–162 (2016). https://doi.org/10.12841/wood.1644-3985.132.11
A. Wójcik, P. Klapa, B. Mitka, J. Sładek, The use of the photogrammetric method for measurement of the repose angle of granular materials. Measurement 115, 19–26 (2018)
A. Wójcik, F. Frączek, The influence of the reposeangle and porosity of granular plant materials on the angle of internalfriction and cohesion. Tribologia 5, 117–123 (2017)
J. Grochowicz, Machines for Cleaning and Sorting of Seeds (WydawnictwoAR, Lublin, 1994). (in Polish)
N.N. Mohsenin, Physical Properties of Plant and Animal Materials (Gordon and Breach Science Public, New York, 1986)
A. Donev, I. Cisse, D. Sachs, E.A. Variano, F.H. Stillinger, R. Connelly, S. Torquato, P.M. Chaikin, Improving the density of jammed disordered packings using elipsoids. Science 303, 990–993 (2004)
J. Frączek, M. Wróbel, Methodic aspects of seed shape assessment. Inzynieria Rolnicza 12(87), 155–163 (2006)
Acknowledgments
This Research was financed by the Ministry of Science and Higher Education of the Republic of Poland.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Wójcik, A., Francik, S., Knapczyk, A. (2020). The Main Factors Determining the Porosity of Granular Materials of Biological Origin. In: Wróbel, M., Jewiarz, M., Szlęk , A. (eds) Renewable Energy Sources: Engineering, Technology, Innovation. Springer Proceedings in Energy. Springer, Cham. https://doi.org/10.1007/978-3-030-13888-2_40
Download citation
DOI: https://doi.org/10.1007/978-3-030-13888-2_40
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-13887-5
Online ISBN: 978-3-030-13888-2
eBook Packages: EnergyEnergy (R0)