Abstract
This chapter provides experimental information concerned with fluid flow in unsaturated porous media, with particular reference to resin transfer molding. Herein, two important topics will be presented: the rectilinear and radial infiltration processes. Results of the flow front position and injection pressure, with or without fillers, in different instants of infiltration process are shown and analyzed. The study is essential to evaluate the mechanical performance of fiber-reinforced polymer composites and to validate new and advanced mathematical modeling related to fluid flow in porous media.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Oliveira IR (2014) Infiltration of loaded fluids in porous media via RTM process: theoretical and experimental analyses. Doctoral Thesis, Process in Engineering, Federal University of Campina Grande, Campina Grande, Brazil. (In Portuguese)
Oliveira IR, Amico SC, Lima AGB, Lima WMPB (2015) Application of calcium carbonate in resin transfer molding process: an experimental investigation. Materialwiss Werkstofftech 46:24–32
Oliveira IR, Amico SC, Luz FF, Barcella R, Bezerra VMF, Lima AGB (2013) Effect of CaCo3 content in resin transfer molding process. Def Diff Forum 334–335:188–192
Oliveira IR, Amico SC, Barcella R, Lima AGB (2014) Application of calcium carbonate in resin transfer molding process. Def Diff Forum 353:39–43
Rudd CD, Long AC, Kendall KN, Mangin GCE (1997) Liquid moulding technologies: resin transfer moulding, structural reaction injection moulding and related processing techniques. Woodhead Publishing Limited, Cambridge, England
Santos MJN, Lima AGB (2017) Manufacturing fiber-reinforced polymer composite using rtm process: an analytical approach. Def Diff Forum 380:60–65
Advani SG, Sozer EM (2011) Process modeling in composites manufacturing. CRC Press, New York, USA
Levy Neto F, Pardini LC (2006) Structural composites—science and technology, 1st edn. Edgard Blucher, São Paulo, Brazil
Luz FF (2011) Comparative analysis of the fluid flow in RTM experiments using commercial applications. Master Thesis, Mines, Metallurgical and Materials Engineering, Federal University of Rio Grande do Sul, Porto Alegre, Brazil. (In Portuguese)
Luz FF, Amico SC, Cunha AL, Barbosa ES, Lima AGB (2012) Applying computational analysis in studies of resin transfer molding. Def Diff Forum 326–328:158–163
Luz FF, Amico SC, Souza JA, Barbosa ES, Lima AGB (2012) Resin Transfer Molding Process: Fundamentals, numerical computation and experiments. In: Delgado JMPQ, Lima AGB, Silva MV (eds) Numerical analysis of heat and mass transfer in porous media. Springer-Verlag, Heidelberg, Germany
Coutinho BG (2013) Mathematical modeling using boundary fitted coordinates and development of a computational simulation for applications in resin transfer molding process. Doctoral Thesis, Process Engineering, Federal University of Campina Grande, Campina Grande, Brazil. (In Portuguese)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2019 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Delgado, J.M.P.Q., Barbosa de Lima, A.G., do Nascimento Santos, M.J. (2019). Advanced Experiments in RTM Processes. In: Transport Phenomena in Liquid Composite Molding Processes. SpringerBriefs in Applied Sciences and Technology. Springer, Cham. https://doi.org/10.1007/978-3-030-12716-9_3
Download citation
DOI: https://doi.org/10.1007/978-3-030-12716-9_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-12715-2
Online ISBN: 978-3-030-12716-9
eBook Packages: EngineeringEngineering (R0)