Abstract
The results of research mode of the “dangerous” pre-destruction zones at the root of cruciform weld joint are presented. A technique for determining the areas of “dangerous” zones in numerical simulation is proposed. The engineering equation to determine the area of the danger zone as a result of numerical modeling of the elastoplastic problem is received.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Troshchenko VT (ed) (1985) Tsiklicheskie deformatsii i ustalost’ metallov (Cyclic Deformation and Fatigue of Metals). Naukova Dumka, Kiev, in 2 vols (Rus.)
Trufiakov VI (ed) (1990) Prochnost’ svarnykh soyedineniy pri peremennykh nagruzkakh (Strength of welded joints at variable loads). Naukova Dumka, Kiev, 256 p (Rus.)
Yushkevich VN (1988) Teoriya i metody rascheta kharakteristik soprotivleniya ustalosti elementov stal’nykh konstruktsiy kranov (Theory and methods of calculating fatigue resistance characteristics of steel structure elements of cranes). Leningrad, LPI, 681 p (Rus.)
Manzhula KP (1997) Teoriya i metody rascheta soprotivleniya ustalosti metallicheskikh konstruktsiy gruzopod”yemnykh mashin (Theory and methods for calculating fatigue resistance of metal structures of lifting machines). PhD thesis. St-Petersburg, 356 p (Rus.)
Manzhula KP (2003) Parametry zon ustalostnogo povrezhdeniya v soyedineniyakh s uglovymi shvami pri rastyazhenii-szhatii (Parameters of the zones of fatigue damage in joints with angular seams at tension-compression). In: Proceedings of the Tula State University. Vol. 4 Hoisting-and-transport machines and equipment. Tula, Publishing House of the Tula State University, pp 207–212 (Rus.)
Manzhula KP (2005) Analiz masshtabnogo effekta pri perenose rezul’tatov ustalostnykh ispytaniy laboratornykh obraztsov na svarnyye konstruktsii (Analysis of the scale effect in transferring the results of fatigue testing of laboratory samples to welded structures). In: Proceedings of the Tula State University. Vol. 5 Hoisting-and-transport machines and equipment. Tula, Publishing House of the Tula State University, pp 107–114 (Rus.)
Manzhula KP (2005) Khuan Pin Parametry zon ustalostnogo povrezhdeniya v soyedineniyakh s uglovymi shvami pri szhatii c izgibom (Parameters of zones of fatigue damage in joints with angular seams during compression with a bend). In: Proceedings of the Tula State University. Vol. 5 Hoisting-and-transport machines and equipment. Tula, Publishing House of the Tula State University, pp 98–108 (Rus.)
Manzhula KP, Shlepetinski AY (2016) Stress and strain concentration in weld-joint flaws. Russ Eng Res 36(9):722–726 (Allerton Press, Inc.)
Shlepetinskii AY, Manzhula KP (2013) Evaluation of stress-deformed of the state of the lack of fusion top in welded joint crusade, Mater. 3-i mezhd. nauchnoprakt. konf. “Sovremennoe mashinostroenie. Nauka i obrazovanie”. In: Proceedings of the 3rd International Sci.-Pract. Conference “Modern Engineering Industry. Science and Education”. S.-Peterb. Politekh. Univ., St. Petersburg, pp 1073–1081
Shlepetinskii AY (2012) Metodika raschetnoy otsenki dolgovechnosti metallokonstruktsiy gruzopod”yemnykh i stroitel’nykh mashin s neprovarami v svarnykh elementakh (The method of calculating the durability assessment of the steel construction lifting and building machines with lack of fusion in welded elements). PhD thesis. St-Petersburg, 176 p (Rus.)
Adler YP, Markova EV, Granovskiy YV (1976) Planirovaniye eksperimenta pri poiske optimal’nykh usloviy (Planning an experiment when searching for optimal conditions). Nauka Publishers, Moscow, 279 p (Rus.)
Brandt S (2014) Data analysis. Statistical and computational methods for scientists and engineers. Springer International Publishing, 523 p
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Shlepetinskiy, A.Y., Manzhula, K.P. (2019). Size of a Zone Dangerous by Damage at the Root of Cruciform Weld Joint. In: Evgrafov, A. (eds) Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-11981-2_16
Download citation
DOI: https://doi.org/10.1007/978-3-030-11981-2_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-11980-5
Online ISBN: 978-3-030-11981-2
eBook Packages: EngineeringEngineering (R0)