Abstract
The dependences of the values of angular velocities and angular accelerations of the driven crank on the leading crank are investigated. The methods of synthesis of modifications of Bennett’s mechanism according to the degree of non-uniformity of rotation of the driven crank, according to the positions of the driving and driven units are considered. Formulas are obtained that allow tracing the influence of the geometric parameters of the links of the mechanism on the kinematics of the cranks. The calculation results are displayed in the form of graphs.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yarullin MG, Khabibullin FF (2017) Theoretical and practical conditions of Bennett mechanism workability. Lect Notes Mech Eng, 145–153
Borodin VM, Lustin AD, Khairov LS, Shcherbakov AV (2017) The six-link mechanism as a topological phenomenon of Mobius symmetry. In: Proceedings of Akademenergo, № 3, pp 79–87 (in Russian)
Lee CC, Herve JM (2014) Oblique circular torus, Villarceau circles, and four types of Bennett linkages. Proc IMechE, Part C J Mech Eng Sci. 228(4):742–752
Yarullin MG, Isyanov IR (2018) Structural study of a two-mobility five-link space mechanism with a double crank. Lect Notes Mech Eng 2018, PartF5, pp 187–194
Yarullin MG, Faizov MR (2018) Synthesis of spherical four-links rotational pairs in the solidworks program. Lect Notes Mech Eng 2018, PartF5, pp 177–185
Husty M, Pfurner M, Schrocker H-P, Brunnthaler K (2007) Algebraic methods in the analysis and synthesis. Robotica. Cambridge University Press, Cambridge, pp 661–675
Yarullin MG, Khabibullin FF (2017) Geometry of the kinematic chain and links of the Bennett mechanism. In: Modern mechanical engineering: science and education: Materials of the 6th International scientific-practical. conference. Ed. A.N. Evgrafova and A.A. Popovich. - SPb .: Publishing house of Polytechnic. Univ., pp 262–274 (in Russian)
Sakhapov RL, Nikolaeva RV, Gatiyatullin MH, Makhmutov MM (2017) Mathematical model of highways network optimization. J Phys Conf Ser 936(1):012032. https://doi.org/10.1088/1742-6596/936/1/012032
Fen H, Kang R, Chen Y (2016) Workspace analysis of a reconfigurable mechanism generated from the network of Bennett linkages. Mech Mach Sci 36:153–163
Gabsattarov RM, Konoplev YG, Sachenkov OA, Egorov SV, Lustin AD (2015) Defining relations of vibrations of vehicle suspension with the mass and rigidity design deviations. Int J Appl Eng Res 10(24):44629–44635
Ding H, Cao W, Chen Z (2015) Structural synthesis of two-layer and two-loop spatial mechanisms with coupling chains. Mech Mach Theor 92:289–313
Evgrafov AN, Petrov GN (2018) Self-braking of planar linkage mechanisms. Lecture Notes in Mechanical Engineering PartF5, pp 83–92
Sakhapov RL, Nikolaeva RV, Gatiyatullin MH, Makhmutov MM (2016) Modeling the dynamics of the chassis of construction machines. J Phys: Conf Ser 738(1):012119. https://doi.org/10.1088/1742-6596/738/1/012119
Guo H, Song X, Li L, Deng Z, Liu R, Geng J (2018) Type synthesis of deployable single-loop overconstrained linkages based on Bennett linkages. Mech Mach Theor 120:1–29
Evgrafov AN, Petrov GN (2017) Computer simulation of mechanisms. Lecture Notes in Mechanical Engineering, pp 45–56
Roshchin VV, Yerakhmadov SN (2017) Method for calculating the thermal conditions of gas cylinders heated from the outside GTD. Bulletin of the Kazan State Technical University. A.N. Tupolev. vol 73, no 2, pp 102–106 (in Russian)
Qu H, Fang Y, Guo S (2013) Bennett motion analysis based on specific regulus. Int J Mech Rob Syst 1(2/3):170–184
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Khabibullin, F.F., Saitov, I.H., Bagautdinov, I.Z. (2019). To the Question of the Synthesis of Modifications Bennett’s Mechanism. In: Evgrafov, A. (eds) Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-11981-2_12
Download citation
DOI: https://doi.org/10.1007/978-3-030-11981-2_12
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-11980-5
Online ISBN: 978-3-030-11981-2
eBook Packages: EngineeringEngineering (R0)