Abstract
The paper analyzes the measurements of the soil compaction factor by vibroacoustic using a dynamic plate. The principle of operation consists in triggering a short-term force impulse, caused by the impact of the weight falling from a certain height. Then, using the accelerometer sensors, the amplitude values of the ground response to the given external extortion were recorded. The analysis of the signal using the fast Fourier transform (FFT) algorithm was aimed at its distribution into harmonic components. A correlation between the number of resonance frequencies occurring in the signal and the compaction factor of the considered soil was observed. For an loose soil there is one resonant frequency and with the change of the soil bulk density, i.e. an increase in the compaction factor, higher order components appear. Using this relationship, it was possible to develop an effective method for assessing the compaction factor of the considered ground material. In the paper three types of experiments were performed. The first type of research was to force the energy impulse with the sensors found on the measuring plate. In the second study, the signal generated by the rammer was read and in the last one the signal was recorded directly on the rammer.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Anderegg R, Kaufmann K (2004) Intelligent compaction with vibratory rollers: feedback conrol systems in automatic compaction and compaction control. Transp Res Rec J Transp Res 1868:124–134 Washington D.C
Scherocman J, Rakowski S, Uchiyama K (2007) Intelligent compaction, does it exist? In: Proceedings of the Annual Conference—Canadian Technical Asphalt Association, vol 52, pp 373–398
Mooney M, Rinehart R, White D, Vennapusa P, Facas N Musimbi O (2010) Intelligent Soil Compaction Systems NCHRP Project 21-09 Final Report Transportation Research Board
Schróder R (2009) Zagęszczanie konstrukcji asfaltowych i ziemnych, HAMM AG
FHWA (2011) Accelerated implementation of intelligent compaction technology for embankment subgrade soils, aggregate base, and asphalt pavement materials—final report. No. FHWA-IF-12–002
Nazarian S, Mazari M, Chang G, Aldouri R, Beltran J (2015) Conducted for Texas Department of Transportation in cooperation with Federal Highway Administration Texas
White D et al (2006) Field Evaluation of Compaction Monitoring Technology: Phase II Final Report to Iowa Department of Transportation
Dynapac Technical data LT600 Rammers (2018). https://dynadocweb.dynapac.com/idc/groups/product_doc/documents/product_documentation/ilt600en.pdf. Accessed 15 Jan 2018
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Kwaśniewski, A., Mirosław, T., Bąk, S., Ciężkowski, P., Maciejewski, J. (2019). Monitoring of Soil Density During Compaction Processes. In: Fernandez Del Rincon, A., Viadero Rueda, F., Chaari, F., Zimroz, R., Haddar, M. (eds) Advances in Condition Monitoring of Machinery in Non-Stationary Operations. CMMNO 2018. Applied Condition Monitoring, vol 15. Springer, Cham. https://doi.org/10.1007/978-3-030-11220-2_42
Download citation
DOI: https://doi.org/10.1007/978-3-030-11220-2_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-11219-6
Online ISBN: 978-3-030-11220-2
eBook Packages: EngineeringEngineering (R0)