Abstract
The mechanical and thermal properties of clay powder filled recycled low density polyethylene (rLDPE) have been determined. The filler loadings considered were at 0, 5, 10, 15 and 20 wt% and particle sizes of 90 and 425 µm. The incorporation of clay powder into rLDPE resulted in improvement of the tensile strength, tensile modulus, fatique, hardness, and impact strength of the composites. The results also show that the mechanical properties increase with increases in filler clay contents and decrease in particle sizes. The strain at break and shear strength were found to decrease with increases in clay loadings. The thermo-graphical analysis on the rLDPE/clay composite showed that increase in filler loading decreases the weight lost thereby enhancing the thermal stability of the rLDPE composite .
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Bisanda ETN (2000) The effect of alkali treatment on the adhesion characteristics of sisal fibres. Appl Compos Mater 7:331
Doh G-H, Lee SY, Kang IA, Kong YT (2005) Thermal behaviour of liquefied wood polymer composites. Compos Struct 68:103–108
Girisha C, Sanjeevamurthy, Guntiranga S (2012) Effect of alkali treatment, fiber loading and hybridization on tensile properties of sisal fiber, banana empty fruit bunch fiber and bamboo fiber reinforced thermo-set composites. Int J Eng Sci Adv Technol 2:706–711
Liu H, Qingxiang Wu, Zhang Q (2009) Preparation and properties of banana fiber-reinforced composites based on high density polyethylene (HDPE)/Nylon-6 blends. J Bioresour Technol 100:6088–6097
Murthy NN (2009) Development of commercial applications for recycled plastics using finite element analysis. M.S.C thesis, Brigham Young University
Onuegbu GC, Obidiegwu MU, Onyedika GO (2016) Matlab analysis of fleural strength and modulus of hybrid nano polyster composite. FUTO J Ser 2(1):96–106
Ramya JR (2010) Preparation, characterization and properties of injection molded grapheme nanocomposites. M.S.C thesis, Wichite State University, Kansas, USA
Tsai SW, Pagano NJ (2011) Invariant properties of composite materials. In: Tsai SW, Halpin JC, Pagano NJ (eds) composite materials workshop. Technomic Publishing Co. Inc., Stamford, 233–253
Utracki LA (2003) Introduction to polymer blends. In: Utracki LA (ed) Polymer Blends Handbook, vol 1. Kluwer Academic Publishers, Dordrecht, pp 3–6
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Onuegbu, G.C., Onyedika, G.O., Ogwuegbu, M.O.C. (2019). Mechanical and Thermal Behaviour of Clay Filled Recycled Low Density Polyethylene. In: Ikhmayies, S., Li, J., Vieira, C., Margem (Deceased), J., de Oliveira Braga, F. (eds) Green Materials Engineering. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-10383-5_2
Download citation
DOI: https://doi.org/10.1007/978-3-030-10383-5_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-10382-8
Online ISBN: 978-3-030-10383-5
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)