Abstract
Based on the movement analysis of burden in charging, a mathematical model of bell-less burden distribution is established to study the burden distribution in the furnace. The mathematical model consists of three sub-models: the material trajectory model, burden profile model, and burden descent model. The novel fitting formula that chute inclination angle and ratio of mixed ore affect the inner angle and outer angle of repose is proposed. The influence of pellet and sinter shapes on the inner angle and outer angle of repose of the ore is considered by introducing a correction coefficient. The modified fitting relation is applied to the mathematical model for bell-less blast furnace to analyze the influence of the proportion of pellet on the surface shape and radial distribution of ore–coke ratio under the same burden matrix. The influence rule of mixed ore ratio on burden distribution is obtained, which provides basis for adjusting the upper part of blast furnace.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Park JI, Jung HJ, Jo MK, Oh HS, Han JW (2011) Mathematical modeling of the burden distribution in the blast furnace shaft. Met Mater Int 17(3):485–496
Yang YL, Yin YX, Donald W et al (2017) Development of blast furnace burden distribution process modeling and control. ISIJ Int 57(8):1350–1363
Fu D, Chen Y, Zhou CQ (2015) Mathematical modeling of blast furnace burden distribution with non-uniform descending speed. Appl Math Model 39:7554–7567
Zhou P, Shi PY, Song YP et al (2016) Evaluation of burden descent model for burden distribution in blast furnace. J Iron Steel Res Int 23(8):765–771
Liu YC (2005) Burden distribution in blast furnace. Metallurgy Industry Press, Beijing
Yu YW, Bai CG, Zhang ZR et al (2009) Theoretical calculation and validation of burden trajectory in bell-less top blast furnace. Ironmaking Steelmaking 36(7):505–508
Zhu QT, Cheng SS (2007) Mathematical model of burden trajectory in a blast furnace. J Univ Sci Technol Beijing 29(9):932–936
Yang TJ, Duan GM, Zhou YS et al (1991) Mathematical model of burden distribution for bell-less top of blast furnace. Iron and Steel (China) 26(11):10–14
Radhakrishnan VR, Maruthy Ram K (2001) Mathematical model for predictive control of the bell-less top charging system of a blast furnace. J Process Control 11:565–586
Li ZN, Liu GZ, Chu MS et al (2016) Research and Application of Burden Charging Model for Large Blast Furnace. J Northeast Univ (Nat Sci) 37(5):658–662
Samik NAG, Ankit GUPTA, Sananda PAUL et al (2014) Prediction of heap shape in blast furnace burden distribution. ISIJ Int 54(7):1517–1520
Shi PY, Fu D, Zhou P et al (2015) Evaluation of stock profile models for burden distribution in blast furnace. Ironmaking Steelmaking 42(10):756–762
Nishio H, Ariyama T (1982) Analysis on formation processes of burden distribution in blast furnace. Tetsu-Hagane 68:2330–2337
Yang K, Choi S, Chung J (2010) Numerical modeling of reaction and flow characteristics in a blast furnace with consideration of layered burden. ISIJ Int 50(7):972–980
Zhu Q, Lu CL, Yin YX et al (2013) Burden distribution calculation of bell-less top of blast furnace based on multi-radar data. J Iron Steel Res Int 20(6):33–37
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Chen, J., Zuo, H., Wang, J., Xue, Q., Liang, J. (2019). Influence of Proportion of Pellet on Burden Distribution. In: Wang, T., et al. Energy Technology 2019. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-06209-5_5
Download citation
DOI: https://doi.org/10.1007/978-3-030-06209-5_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-06208-8
Online ISBN: 978-3-030-06209-5
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)