Abstract
Cost of ownership of a capital item, increases exponentially, as the age of the equipment increases. Maintenance efforts involved in optimally maintaining the item procured, is determined predominantly by the Mean Time Between Failure [MTBF], Mean Time to Repair [MTTR] in addition to the required Man Hours. Knowing the faults and prognostics prior to failures will result in significant reduction in down time and the cost of maintenance. Software plays vital role in this regard, along with the required instrumentation in capturing and forecasting the anticipated failures and inform well in advance the maintenance requirements of the particular item. This paper describes in detail about designing an item, with the perspective of optimizing the maintenance efforts and cost, by using software techniques as one of the design parameters. MMH/OH is one among the terminologies used to describe, the amount of efforts required in terms of time, to operate a system [fly an aircraft/drive a car] for an hour in the normalized scale. Starting with the allocation of MMH/OH target, to systems, subsystems and LRUs [Line Replaceable Unit], realization of the target MMH/OH is dealt with, in detail, using software enabled control and communication. The proposed model and technique has been validated with a typical fighter aircraft.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- BD :
-
Base Depot
- BIT :
-
Built In Test
- D :
-
Depot
- DC :
-
Duty Cycle
- DfM :
-
Design for Maintenance
- DMU :
-
Digital Mock Up
- EMTBF :
-
Effective Mean Time Between Failure
- EMTTF :
-
Effective Mean Time to Failure
- FH :
-
Flight Hour
- FT :
-
Fault Tolerance
- FTF :
-
Fault Tolerance Factor
- GSE :
-
Ground Support Equipment
- IVHM :
-
Integrated Vehicle Health Management
- IVR :
-
Immersive Virtual Reality
- LCC :
-
Life Cycle Cost
- LRU :
-
Line Replaceable Unit
- MDT :
-
Mean Down Time
- MMH :
-
Maintenance Man Hour
- MSF :
-
Maintenance Significant Factor
- MTBF :
-
Mean Time Between Failure
- MTTF :
-
Mean Time to Failure
- OH :
-
Operational Hour
- PHM :
-
Prognostics Health Management
- pdf :
-
Probability Density Function
- \( R{ \& }M\) :
-
Reliability and Maintainability
- RAMS :
-
Reliability, Availability, Maintainability and Safety
- RSF :
-
Reliability Significant Factor
- SCM :
-
Scheduled Maintenance
- USCM :
-
Unscheduled Maintenance
- VR :
-
Virtual Reality
References
John, S., Chipchak, A.: Practical method of maintainability allocation. IEEE Trans. Aerosp. Electron. Syst. AES–7(4), 585–589 (1971)
Fard, N.S., Melachrinoudis, E.: Maintenance scheduling for critical parts of aircraft. In: Proceedings Annual Reliability and Maintainability Symposium (1991)
Yanjie, Q., Zhigang, L., Bifeng, S.: New concept for aircraft maintenance management. In: Proceedings Annual Reliability and Maintainability Symposium, pp. 401–405 (2001)
Dupuy, M.J., Wesely, D.E., Jenkins, C.S.: Airline fleet maintenance: trade-off analysis of alternate aircraft maintenance approaches. In: Proceedings of 2011 IEEE Systems and Information Engineering Design Symposium, 29 April 2011
Zhang, A., Cui, L., Zhang, P.: Advanced military aircraft of study on condition-based maintenance. In: 2013 International Conference on Information Technology and Applications (2013)
Rau, C.-G., Necas, P., Boscoianu, M.: Review of maintainability and maintenance optimization methods for aviation engineering systems. Sci. Mil. 6(2), 54 (2011)
Holzel, N.B., Schilling, T., Gollnick, V.: An aircraft lifecycle approach for the cost-benefit analysis of prognostics, and condition-based maintenance based on discrete-event simulation. In: Proceedings Annual Conference of the Prognostics and Health Management Society (2014)
Varuvel, A.G., Prakash, R.: An allocation technique of MMH/FH for an aircraft. In: Prasath, R., Gelbukh, A. (eds.) MIKE 2016. LNCS (LNAI), vol. 10089, pp. 93–104. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-58130-9_10
Acknowledgment
This research work was executed in Aeronautical Development Agency, Bangalore-INDIA.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Switzerland AG
About this paper
Cite this paper
Varuvel, A.G., Prasath, R. (2018). Software Driven Optimal Design for Maintenance Man Hour. In: Groza, A., Prasath, R. (eds) Mining Intelligence and Knowledge Exploration. MIKE 2018. Lecture Notes in Computer Science(), vol 11308. Springer, Cham. https://doi.org/10.1007/978-3-030-05918-7_14
Download citation
DOI: https://doi.org/10.1007/978-3-030-05918-7_14
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-05917-0
Online ISBN: 978-3-030-05918-7
eBook Packages: Computer ScienceComputer Science (R0)