Abstract
The relationship between the microstructure , mechanical properties and martensitic phase transformation of N-containing Co–26Cr–5Mo–5W alloys by selective laser melting (SLM ) is studied. The high-resolution transmission electron microscope and X-ray diffraction observations show that two phases (ε and γ phase) co-exist in N-free alloys. In contrast, a significant decrease of ε phase is observed in N-containing alloys. It is believed that the stabilization of γ phase in N-containing alloys results from the lattice distortion and Si-rich fine-distributed precipitates that block the motion of dislocations. Both the ultimate tensile strength and 0.2% proof strength can be significantly improved by nitrogen addition. Interestingly, the elongation slightly increases as well. They are ~1385 MPa, ~1140 MPa, and ~18.4% for 0.08 N-containing Co–26Cr–5Mo–5W alloys, respectively. It is clear that nitrogen addition during the SLM processing could be a promising strategy to fabricate Co–Cr–Mo–W alloys with an excellent combination of strength and ductility by suppressing face-centered cubic (fcc) → hexagonal close-packed (hcp) martensitic phase transformation .
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Hyslop DJS, Abdelkader AM, Cox A, Fray DJ (2010) Electrochemical synthesis of a biomedically important Co–Cr alloy. Acta Mater 58(8):3124–3130
Song CB, Park HB, Seong HG, Lopez HF (2006) Development of athermal epsilon-martensite in atomized Co–Cr–Mo–C implant alloy powders. Acta Biomater 2(6):685–691
Zhou X, Wang D, Liu X, Zhang D, Qu S, Ma J, London G, Shen Z, Liu W (2015) 3D-imaging of selective laser melting defects in a Co–Cr–Mo alloy by synchrotron radiation micro-CT. Acta Mater 98(2):1–16
Kajima Y, Takaichi A, Nakamoto T, Kimura T, Yogo Y, Ashida M, Doi H, Nomura N, Takahashi H, Hanawa T, Wakabayashi N (2016) Fatigue strength of Co–Cr–Mo alloy clasps prepared by selective laser melting. J Mech Behav Biomed Mater 59: 446–458. https://doi.org/10.1016/j.jmbbm.2016.02.032
Yamanaka K, Mori M, Chiba A (2016) Developing high strength and ductility in biomedical Co–Cr cast alloys by simultaneous doping with nitrogen and carbon. Acta Biomater 31:435–447. https://doi.org/10.1016/j.actbio.2015.12.011
Saldivar-Garcia AJ, Lopez HF (2005) Microstructural effects on the wear resistance of wrought and as-cast Co–Cr–Mo–C implant alloys. J Biomed Mater Res A 74(2):269–274
Akova T, Ucar Y, Tukay A, Balkaya MC, Brantley WA (2008) Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain. Dent Mater 24(10):1400–1404
Yoda K, Takaichi AS, Nomura N, Tsutsumi Y, Doi H, Kurosu S, Chiba A, Igarashi Y, Hanawa T (2012) Effects of chromium and nitrogen content on the microstructures and mechanical properties of as-cast Co–Cr–Mo alloys for dental applications. Acta Biomater 8(7):2856–2862
Olson GB, Cohen M (1972) A mechanism for the strain-induced nucleation of martensitic transformations. J Less-Common Met 28(1):107–118
Garcı́ AADJS, Medrano AM, Rodrı́Guez AS (1999) Effect of solution treatments on the FCC/HCP isothermal martensitic transformation in Co–27Cr–5Mo–0.05C aged at 800 °C. Scr Mater 40(6):717–722
Matsumoto H, Kurosu S, Lee BS, Li Y, Chiba A (2010) Deformation mode in biomedical Co–27%Cr–5%Mo alloy consisting of a single hexagonal close-packed structure. Scr Mater 63(11):1092–1095
Yamanaka K, Mori M, Chiba A (2013) Nanoarchitectured Co–Cr–Mo orthopedic implant alloys: nitrogen-enhanced nanostructural evolution and its effect on phase stability. Acta Biomater 9(4):6259–6267
Yamanaka K, Mori M, Chiba A (2014) Effects of nitrogen addition on microstructure and mechanical behavior of biomedical Co-Cr-Mo alloys. J Mech Behav Biomed Mater 29(1):417–426
Takaichi AS, Nakamoto T, Joko N, Nomura N, Tsutsumi Y, Migita S, Doi H, Kurosu S, Chiba A, Wakabayashi N, Igarashi Y, Hanawa T (2013) Microstructures and mechanical properties of Co–29Cr–6Mo alloy fabricated by selective laser melting process for dental applications. J Mech Behav Biomed Mater 21(3):67–76
Bartolomeu F, Buciumeanu M, Pinto E, Alves N, Carvalho O, Silva FS, Miranda G (2017) 316L stainless steel mechanical and tribological behavior − a comparison between selective laser melting, hot pressing and conventional casting. Addit Manuf 16:81–89. https://doi.org/10.1016/j.addma.2017.05.007
Mengucci P, Barucca G, Gatto A, Bassoli E, Denti L, Fiori F, Girardin E, Bastianoni P, Rutkowski B, Czyrska-Filemonowicz A (2016) Effects of thermal treatments on microstructure and mechanical properties of a Co–Cr–Mo–W biomedical alloy produced by laser sintering. J Mech Behav Biomed Mater 60:106–117. https://doi.org/10.1016/j.jmbbm.2015.12.045
Liu S, Huang Z (Pending) A preparing powder method of microelement doped Co–Cr alloy. Chinese Patent 20171049404
Mani A, Salinas R, Lopez HF (2011) Deformation induced FCC to HCP transformation in a Co–27Cr–5Mo–0.05C alloy. Mater Sci Eng A 528 (7–8):3037–3043
Chiba A, Nomura N, Ono Y (2015) Microstructure and mechanical properties of biomedical Co–29Cr–8Mo alloy wire fabricated by a modified melt-spinning process. Acta Mater 55(6):2119–2128
Koizumi Y, Suzuki S, Yamanaka K, Lee B-S, Sato K, Li Y, Kurosu S, Matsumoto H, Chiba A (2013) Strain-induced martensitic transformation near twin boundaries in a biomedical Co–Cr–Mo alloy with negative stacking fault energy. Acta Mater 61 (5):1648–1661
Vander-Sande JB, Coke JR, Wulff J (1976) A transmission electron microscopy study of the mechanisms of strengthening in heat-treated Co–Cr–Mo–C alloys. Metall Trans A 7(3):389–397
Putaux JL, Chevalier JP (1996) HREM study of self-accommodated thermal ε-martensite in an Fe–Mn–Si–Cr–Ni shape memory alloy. Acta Mater 44(4):1701–1716
Acknowledgements
The use of facilities in the State Key Laboratory for Powder Metallurgy and the Institute for Materials Microstructure at Central South University is acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Wang, B., An, X., Liu, F., Song, M., Ni, S., Liu, S. (2019). Influence of Nitrogen on Microstructure, Mechanical Properties and Martensitic Phase Transformation of Co–26Cr–5Mo–5W Alloys by Selective Laser Melting. In: TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-05861-6_40
Download citation
DOI: https://doi.org/10.1007/978-3-030-05861-6_40
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-05860-9
Online ISBN: 978-3-030-05861-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)