Abstract
Compact printed monopole antenna suitable for UWB applications has been studied and analyzed. The design procedure of the proposed antenna has been elaborated into five stages, Firstly, the antenna with full ground plane was built, in which shows a narrow band of around 10 GHz. Secondly, the ground plane was optimally cut in order to enhance the antenna bandwidth, this version demonstrates a wide bandwidth from 3.15 GHz to 7.20 GHz. Thirdly, to cover the whole range of the UWB spectrum, a rectangle slot was generated on the micro strip line, this version shows a broad frequency range from 3.15 GHz up to 11 GHz, in which meet the UWB system. However, an electromagnetic interference (EMI) may exist in the UWB spectrum, thus, a simple and effective approach of U-slot was used. The U-slot was printed over the radiating element, in which created a notched band around 6.5 GHz. However, this fixed filtering notch cannot be tuned, therefore, a lumped capacitor was positioned on the best place over the generated U-slot, this makes the introduced rejected band tuned over a broad frequency range from 6.5 GHz up to 5.2 GHz. The results exhibit that the antenna structure may be deemed as an attractive candidate for todays’ smart applications.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
FCC 1st report and order on ultra-wideband technology. FCC, Washington, DC, February 2002
Chamaani, S., Mirtaheri, S.A.: Planar UWB monopole antenna optimization to enhance time-domain characteristics using PSO. Int. J. Electron. Commun. 64, 351–359 (2010)
Al-Zoubi, A., Yang, F., Kishk, A.: A broadband center-fed circular patch-ring antenna with a monopole like radiation pattern. IEEE Trans. Antennas Propag. 57, 789–792 (2009)
Sarin, V.P., Deepu, V., Aanandan, C.K., Mohanan, P., Vasudevan, K.: Wideband printed microstrip antenna for wireless communications. IEEE Antennas Wireless Propag. Lett. 8, 779–781 (2009)
Oh, S.K., Yoon, H.S., Park, S.O.: A PIFA-type varactor-tunable slim antenna with a PIL patch feed for multiband applications. IEEE Antennas Wireless Propag. Lett. 6, 103–105 (2007)
Nasimuddin, N., Chen, Z.N.: Wideband multilayered microstrip antennas fed by coplanar waveguide-loop with and without via combinations. IET Microw. Antennas Propag. 3, 85–91 (2009)
Elfergani, I., Hussaini, A.S., Rodriguez, J., Abd-Alhameed, R.A.: Antenna Fundamentals for Legacy Mobile Applications and Beyond. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-63967-3. ISBN 978-3-319-63967-3
Ray, K.P., Thakur, S.S., Deshmkh, A.A.: Compact slotted printed monopole UWB antenna. In: International Conference on Communication Technology, pp. 16–18 (2013)
Khan, M.K., Khan, M.I., Ahmad, I., Saleem, M.: Design of a printed monopole antenna with ridged ground for ultra wideband applications. In: 2016 Progress In Electromagnetic Research Symposium (PIERS), Shanghai, China, 8–11 August, pp. 4394–4396 (2016)
Abid, M., Kazim, J., Owais, O.: Ultra-wideband circular printed monopole antenna for cognitive radio applications. Int. J. Microw. Opt. Technol. 10(3), 184–189 (2015)
Ebadzadeh, S.R., Zehforoosh, Y.: A compact UWB monopole antenna with rejected WLAN band using split-ring resonator and assessed by analytic hierarchy process method. J. Microwaves Optoelectron. Electromagn. Appl. 16(2), 592–601 (2017)
Jangid, K.G., et al.: Circular patch antenna with defected ground for UWB communication with WLAN band rejection. Defence Sci. J. 66(2), 162–167 (2016). https://doi.org/10.14429/dsj.66.9329
Yadav, A., Sethi, D., Khanna, R.K.: Slot loaded UWB antenna: dual band notched characteristics. Int. J. Electron. Commun. (AEÜ) 70, 331–335 (2016)
Elfergani, I., Lopes, P., Rodriguez, J., Lo Hine Tong, D.: Simple and compact planar ultra-wideband antenna with band-notched characteristics. In: Elfergani, I., Hussaini, A.S., Rodriguez, J., Abd-Alhameed, R. (eds.) Antenna Fundamentals for Legacy Mobile Applications and Beyond, pp. 119–134. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-63967-3_6
Hamad, E.K.I., Mahmoud, N.: Compact tri-band notched characteristics UWB antenna for WiMAX, WLAN and X-band applications. Adv. Electromagnetics 6(2), 53–58 (2017)
Chen, X., Xu, F., Tan, X.: Design of a compact UWB antenna with triple notched bands using nonuniform width slots. Journal of Sensors 2017, 1–9 (2017). Article ID 7673168
CST-Computer Simulation Technology AG (2014)
Acknowledgment
This work is carried out under the grant of the Fundacão para a Ciência e a Tecnologia (FCT - Portugal), with the reference number: SFRH/BPD/95110/2013. This work is supported by the European Union’s Horizon 2020 Research and Innovation program under grant agreement H2020-MSCA-ITN-2016-SECRET-722424.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Elfergani, I., Alrawi, M., Abdalla, A.M., Rodriguez, J., Ullah, A., Abd-Alhameed, R. (2019). Design of Compact Printed Monopole Antenna with Enhanced Bandwidth and Controllable Filtering Notch for UWB Applications. In: Sucasas, V., Mantas, G., Althunibat, S. (eds) Broadband Communications, Networks, and Systems. BROADNETS 2018. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 263. Springer, Cham. https://doi.org/10.1007/978-3-030-05195-2_29
Download citation
DOI: https://doi.org/10.1007/978-3-030-05195-2_29
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-05194-5
Online ISBN: 978-3-030-05195-2
eBook Packages: Computer ScienceComputer Science (R0)