Abstract
With an ageing population [1] and an increasing rate of sports related injuries [2], the need for a steady and reliable source of good quality materials for orthopaedic applications seems paramount. Currently, the three main commercially available types of orthopaedic implants are: non-degradable implants, biodegradable polymeric implants and bioresorbable composites or biocomposites, that is composites made of biodegradable polymers and calcium-based fillers. Figure 1.1 depicts the different types of interference screws for anterior cruciate ligament (ACL) reconstruction manufactured by Stryker [3].
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Suzman, R., Beard, J. (2011). Global health and aging. Technical Report 11-7737, World Health Organization.
Health and Social Care Information Centre (2012). Provisional monthly hospital episode statistics for admitted patient care, outpatients and accident and emergency data - April 2012. Technical report, National Health Service.
Stryker (2004). Fixation devices for ACL reconstruction. Commercial brochure. Retrieved September 1, 2016 from http://www.stryker.com/emea/Solutions/ACLRepair/UniversalACLInstrumentationSystem/index.htm.
Myers, P., Logan, M., Stokes, A., Boyd, K., & Watts, M. (2008). Bioabsorbable versus titanium interference screws with hamstring autograft in anterior cruciate ligament reconstruction: a prospective randomized trial with 2-year follow-up. Arthroscopy: The Journal of Arthroscopic & Related Surgery 24(7), 817–823.
Emond, C. E., Woelber, E. B., Kurd, S. K., Ciccotti, M. G., & Cohen, S. B. (2011). A comparison of the results of anterior cruciate ligament reconstruction using bioabsorbable versus metal interference screws: a meta-analysis. JBJS, 93(6), 572–580.
Drogset, J. O., Straume, L. G., Bjørkmo, I., & Myhr, G. (2011). A prospective randomized study of ACL-reconstructions using bone-patellar tendon-bone grafts fixed with bioabsorbable or metal interference screws. Knee Surgery, Sports Traumatology, Arthroscopy, 19(5), 753–759.
Kontakis, G. M., Pagkalos, J. E., Tosounidis, T. I., Melissas, J., & Katonis, P. (2007). Bioabsorbable materials in orthopaedics. Acta Orthopaedica Belgica, 73(2), 159.
Ambrose, C. G., & Clanton, T. O. (2004). Bioabsorbable implants: review of clinical experience in orthopedic surgery. Annals of Biomedical Engineering, 32(1), 171–177.
Amini, A. R., Wallace, J. S., & Nukavarapu, S. P. (2011). Short-term and long-term effects of orthopedic biodegradable implants. Journal of Long-term Effects of Medical Implants 21(2).
Hench, L. L., & Polak, J. M. (2002). Third-generation biomedical materials. Science, 295(5557), 1014–1017.
Walton, M., & Cotton, N. J. (2007). Long-term in vivo degradation of poly-L-lactide (PLLA) in bone. Journal of Biomaterials Applications, 21(4), 395–411.
Weiler, A., Hoffmann, R. F., Stähelin, A. C., Helling, H.-J., & Südkamp, N. P. (2000). Biodegradable implants in sports medicine: the biological base. Arthroscopy, 16(3), 305–321.
Disegi, J. A., & Wyss, H. (1989). Implant materials for fracture fixation: a clinical perspective. Orthopedics, 12(1), 75–79.
Pietrzak, W. S., Verstynen, M. L., & Sarver, D. R. (1997). Bioabsorbable fixation devices: status for the craniomaxillofacial surgeon. The Journal of Craniofacial Surgery, 8(2), 92–96.
Verheyen, C., De Wijn, J., Van Blitterswijk, C., & De Groot, K. (1992). Evaluation of hydroxylapatite/poly(L-lactide) composites: mechanical behavior. Journal of Biomedical Materials Research, 26(10), 1277–1296.
Shikinami, Y., & Okuno, M. (1999). Bioresorbable devices made of forged composites of hydroxyapatite (HA) particles and poly-L-lactide (PLLA): part I. Basic characteristics. Biomaterials, 20(9), 859–877.
Tsunoda, M. (2003). Degradation of poly(DL-lactic acid-co-glycolic acid) containing calcium carbonate and hydroxyapatite fillers-effect of size and shape of the fillers. Dental Materials Journal, 22(3), 371–382.
Deng, X., Sui, G., Zhao, M., Chen, G., & Yang, X. (2007). Poly(L-lactic acid)/hydroxyapatite hybrid nanofibrous scaffolds prepared by electrospinning. Journal of Biomaterials Science, Polymer Edition, 18(1), 117–130.
Yang, Z., Best, S. M., & Cameron, R. E. (2009). The influence of \(\alpha \)-tricalcium phosphate nanoparticles and microparticles on the degradation of poly(D, L-lactide-co-glycolide). Advanced Materials, 21(38–39), 3900–3904.
Ara, M., Watanabe, M., & Imai, Y. (2002). Effect of blending calcium compounds on hydrolytic degradation of poly(DL-lactic acid-co-glycolic acid). Biomaterials, 23(12), 2479–2483.
Kikuchi, M., Koyama, Y., Yamada, T., Imamura, Y., Okada, T., Shirahama, N., et al. (2004). Development of guided bone regeneration membrane composed of \(\beta \)-tricalcium phosphate and poly(L-lactide-co-glycolide-co-\(\varepsilon \)-caprolactone) composites. Biomaterials, 25(28), 5979–5986.
Pan, J., Han, X., Niu, W., & Cameron, R. E. (2011). A model for biodegradation of composite materials made of polyesters and tricalcium phosphates. Biomaterials, 32(9), 2248–2255.
Pan, J. (2014). Modelling degradation of bioresorbable polymeric medical devices. Elsevier.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Moreno-Gomez, I. (2019). Introduction. In: A Phenomenological Mathematical Modelling Framework for the Degradation of Bioresorbable Composites. Springer Theses. Springer, Cham. https://doi.org/10.1007/978-3-030-04990-4_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-04990-4_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-04989-8
Online ISBN: 978-3-030-04990-4
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)