Abstract
The article presents design and construction process of rotating discs. For the analysis, models of a disc of uniform strength and a disc of constant thickness with a center hole were used. The next stage consisted in creating geometric disc models. Based on the analyzes made, a decision was made to build two discs: with straight and curved radial channels. The aim of the analysis was to learn the mechanism of disc destruction and to determine the speed at which the discs will be destroyed. It was particularly important from the research point of view to compare the results obtained for discs with straight and curved channels. After the numerical analyzes, disc-destroying tests were carried out on a special strength test machine that would enable destruction of the tested parts by rotating them at high speeds.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Behrooz F, Hamid J, Abdolhossein M (2004) Optimum design of inhomogeneous non-uniform rotating discs. Comput Struct 82:773–779
Çallıoğlu H, Sayer M, Demir E (2015) Elastic–plastic stress analysis of rotating functionally graded discs. Thin-Walled Struct 94:38–44
Vullo V, Vivio F (2013) Rotors: stress analysis and design ISBN 978-88-470-2562-2 Springer-Verlag Mailand, Mechanical Engineering Series
Mahdavi E, Ghasemib A, Alashtic RA (2016) Elastic–plastic analysis of functionally graded rotating disks with variable thickness and temperature-dependent material properties under mechanical loading and unloading. Aerosp Sci Technol 59:57–68
Jafari S, Hojjati MH, Fathi A (2012) Classical and modern optimization methods in minimum weight design of elastic rotating disk with variable thickness and density. Int J Press Vessel Pip 92:41–47
Belyaev VM, Zurilin AA, Cherkasov SO (2014) On the strength calculation of the rotating parts. Procedia Chem 10:151–157
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Krot, K., Górski, P. (2019). Design, Strength Analysis and Destructive Testing Rotating Discs. In: Rusiński, E., Pietrusiak, D. (eds) Proceedings of the 14th International Scientific Conference: Computer Aided Engineering. CAE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-04975-1_43
Download citation
DOI: https://doi.org/10.1007/978-3-030-04975-1_43
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-04974-4
Online ISBN: 978-3-030-04975-1
eBook Packages: EngineeringEngineering (R0)