Abstract
In this chapter, the absorption section of two pilot-plant facilities, different in dimensions and operating conditions, is modeled. A discussion on the typical temperature bulge, which gives important indications on the behavior of the absorber, is reported. The Peclet number is evaluated for both the cases with reference to the material and the energy transport and to different characteristic lengths, highlighting that the columns have a plug-flow like behavior. Then, the number of segments analysis is performed in order to obtain the correct representation of the process and investigate the possible effect of the backmixing due to the countercurrent. The proposed model suitably describes the experimental data and particularly the temperature bulge, independently on its location.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Tontiwachwuthikul P, Meisen A, Lim CJ (1989) Novel pilot plant technique for sizing gas absorbers with chemical reactions. Can J Chem Eng 67(4):602–607
Tontiwachwuthikul P, Meisen A, Lim CJ (1992) CO2 absorption by NaOH, Monoethanolamine and 2-Amino-2-Methyl-1-Propanol solutions in a packed column. Chem Eng Sci 47(2):381–390
Razi N, Svendsen HF, Bolland O (2013) Validation of mass transfer correlations for CO2 absorption with MEA using pilot data. Int J Greenhouse Gas Control 19:478–491
Kvamsdal HM, Rochelle GT (2008) Effect of the temperature bulge in CO2 absorption from flue gas by aqueous monoethanolamine. Ind Eng Chem Res 47(3):867–875
Errico M, Madeddu C, Pinna D et al (2016) Model calibration for the carbon dioxide-amine absorption system. Appl Energy 183:958–968
Davis ME (1984) Numerical methods and modelling for chemical engineers. Wiley, New York
Kenig EY, Schneider R, Górak A (1999) Rigorous dynamic modelling of complex reactive absorption processes. Chem Eng Sci 54(21):5195–5203
Schneider R, Kenig EY, Górak A (2001) Complex reactive absorption processes: model optimization and dynamic column simulation. Comput Aided Chem Eng 9:285–290
Onda K, Takeuchi H, Okumoto Y (1968) Mass transfer coefficients between gas and liquid phases in packed columns. J Chem Eng Jpn 1(1):56–62
Bravo JL, Ja Rocka, Fair JR (1985) Mass transfer in gauze packings. Hydrocarb Processes 64(1):91–95
Chilton TH, Colburn AP (1934) Mass transfer (absorption) coefficient. Prediction from data on heat transfer and fluid friction. Ind Eng Chem 26(11):1183–1187
Stichlmair J, Bravo JL, Fair JR (1989) General model for prediction of pressure drop and capacity of countercurrent gas/liquid packed columns. Gas Sep Purif 3(1):19–28
Bravo JL, Rocha JA, Fair JR (1992) A comprehensive model for the performance of column containing structured packing. IChEME Symp S 128:A439–A453
Zhang Y, Chen H, Chen C-C et al (2009) Rate-based process modeling study of CO2 capture with aqueous monoethanolamine solution. Ind Eng Chem Res 48(20):9233–9246
Mores P, Scenna N, Mussati S (2012) A rate based model of a packed column for CO2 absorption using aqueous monoethanolamine solution. Int J Greenhouse Gas Control 6:21–36
Kucka L, Müller I, Kenig EY, Górak A (2003) On the modelling and simulation of sour gas absorption by aqueous amine solutions. Chem Eng Sci 58(16):3571–3578
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2019 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Madeddu, C., Errico, M., Baratti, R. (2019). Model Validation for the Absorber. In: CO2 Capture by Reactive Absorption-Stripping. SpringerBriefs in Energy. Springer, Cham. https://doi.org/10.1007/978-3-030-04579-1_3
Download citation
DOI: https://doi.org/10.1007/978-3-030-04579-1_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-04578-4
Online ISBN: 978-3-030-04579-1
eBook Packages: EnergyEnergy (R0)