Abstract
As a consequence to the remarkable development of the science and technology, an exponential demand for energy leads to the exploitation of nonrenewable energy sources including fossil fuel paves the way to stern environmental crises. Global warming is one of the principal threats, due to the accumulation of greenhouse gases, resulting from the use of fossil fuels. Because of limited availability, the fossil fuels have been rapidly exhausting, compelling researchers to accelerate the search for environment-friendly, renewable, and sustainable energy sources like the solar cell, wind, and electrochemical energy storage systems. Electrochemical energy storage systems (EESs), more specifically rechargeable batteries and supercapacitors being efficient alternatives, have attracted tremendous attention. Rechargeable batteries not only serve as energy storage devices but also capable of providing the dispatchable energy for transportation, i.e., electrical vehicles (EVs and hybrid EVs).
Although LIBs possess energy densities higher than those of the conventional batteries, their lower power densities and poor cycling lives are critical challenges for their applications in electric vehicles (EVs) and grid-scale storage. The present book chapter is an attempt to provide a detailed description of several aspects of the development of Li-ion battery, i.e., preferred electrode (cathode as well as the anode) materials, separators, electrolyte media, and their additives with associated challenges. This chapter spotlights the mechanism for Li-ion storage (lithiation/delithiation processes) with various vital parameters that determine the overall performance of a battery including the shape and size of electrode materials. The recent advancement in designing several nanostructures for high-energy electrodes are highlighted in detail.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Abe K, Yoshitake H, Kitakura T, Hattori T, Wang H, Yoshio M (2004) Additives-containing functional electrolytes for suppressing electrolyte decomposition in lithium-ion batteries. Electrochim Acta 49(26):4613–4622. https://doi.org/10.1016/j.electacta.2004.05.016
Agubra VA, Fergus JW (2014) The formation and stability of the solid electrolyte interface on the graphite anode. J Power Sources 268:153–162. https://doi.org/10.1016/j.jpowsour.2014.06.024
Akira Y (2012) The birth of the lithium-ion battery. Angew Chem Int Ed 51(24):5798–5800. https://doi.org/10.1002/anie.201105006
Antolini E (2004) LiCoO2: formation, structure, lithium and oxygen nonstoichiometry, electrochemical behaviour and transport properties. Solid State Ionics 170(3):159–171. https://doi.org/10.1016/j.ssi.2004.04.003
Anton T, Ravi K, Chunzeng L, Stephen M, Xingcheng X, Sheldon WB (2016) Control and optimization of the electrochemical and mechanical properties of the solid electrolyte interphase on silicon electrodes in Lithium ion batteries. Adv Energy Mater 6(8):1502302. https://doi.org/10.1002/aenm.201502302
Aricò AS, Bruce P, Scrosati B, Tarascon J-M, van Schalkwijk W (2005) Nanostructured materials for advanced energy conversion and storage devices. Nat Mater 4:366. https://doi.org/10.1038/nmat1368
Armand M, Tarascon J-M (2008) Building better batteries. Nature 451:652. https://doi.org/10.1038/451652
Armstrong G, Armstrong AR, Bruce PG, Reale P, Scrosati B (2006) TiO2(B) nanowires as an improved anode material for Lithium-ion batteries containing LiFePO4 or LiNi0.5Mn1.5O4 cathodes and a polymer electrolyte. Adv Mater 18(19):2597–2600. https://doi.org/10.1002/adma.200601232
Arora P, Zhang Z(J) (2004) Battery separators. Chem Rev 104(10):4419–4462. https://doi.org/10.1021/cr020738u
Arya A, Sharma AL (2017) Polymer electrolytes for lithium ion batteries: a critical study. Ionics 23(3):497–540. https://doi.org/10.1007/s11581-016-1908-6
Augustin S, Hennige V, Hörpel G, Hying C (2002) Ceramic but flexible: new ceramic membrane foils for fuel cells and batteries. Desalination 146(1):23–28. https://doi.org/10.1016/S0011-9164(02)00465-4
Aurbach D (1989) The electrochemical behavior of lithium salt solutions of γ-butyrolactone with noble metal electrodes. J Electrochem Soc 136(4):906–913. https://doi.org/10.1149/1.2096876
Aurbach D, Levi MD, Gamulski K, Markovsky B, Salitra G, Levi E, Oesten R (1999) Capacity fading of LixMn2O4 spinel electrodes studied by XRD and electroanalytical techniques. J Power Sources 81–82:472–479. https://doi.org/10.1016/S0378-7753(99)00204-9
Aurbach D, Gamolsky K, Markovsky B, Gofer Y, Schmidt M, Heider U (2002) On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries. Electrochim Acta 47(9):1423–1439. https://doi.org/10.1016/S0013-4686(01)00858-1
Aurbach D, Suresh GS, Levi E, Mitelman A, Mizrahi O, Chusid O, Brunelli M (2007) Progress in rechargeable magnesium battery technology. Adv Mater 19(23):4260–4267. https://doi.org/10.1002/adma.200701495
Banerjee J, Dutta K (2016) Materials for electrodes of Li-ion batteries: issues related to stress development. Crit Rev Solid State Mater Sci 42:218–238
Bao W, Zhang Z, Gan Y, Wang X, Lia J (2013) Enhanced cyclability of sulfur cathodes in lithium-sulfur batteries with Na-alginate as a binder. J Energy Chem 22(5):790–794. https://doi.org/10.1016/S2095-4956(13)60105-9
Behera SK (2011) Enhanced rate performance and cyclic stability of Fe3O4-graphene nanocomposites for li ion battery anodes. Chem Commun 47(37):10371–10373. https://doi.org/10.1039/C1CC13218K
Berthier C, Gorecki W, Minier M, Armand MB, Chabagno JM, Rigaud P (1983) Microscopic investigation of ionic conductivity in alkali metal salts-poly(ethylene oxide) adducts. Solid State Ionics 11(1):91–95. https://doi.org/10.1016/0167-2738(83)90068-1
Biao Z, Matei GC, Christel L, Cathie V, Jean-Marie T (2015) Correlation between microstructure and Na storage behavior in hard carbon. Adv Energy Mater 6(1):1501588. https://doi.org/10.1002/aenm.201501588
Bindumadhavan K, Srivastava SK, Mahanty S (2013) MoS2-MWCNT hybrids as a superior anode in lithium-ion batteries. Chem Commun 49(18):1823–1825. https://doi.org/10.1039/C3CC38598A
Bonaccorso F, Colombo L, Yu G, Stoller M, Tozzini V, Ferrari AC, Pellegrini V (2015) Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage. Science 347(6217):1246501. https://doi.org/10.1126/science.1246501
Borghols WJH, Wagemaker M, Lafont U, Kelder EM, Mulder FM (2009) Size effects in the Li4+xTi5O12 spinel. J Am Chem Soc 131(49):17786–17792. https://doi.org/10.1021/ja902423e
Bottone SR (2010) Galvanic batteries, their theory, construction and use, comprising primary, single and double fluid cells. Secondary and gas batteries. Nabu Press, Charleston
Bron P, Johansson S, Zick K, Schmedt auf der Günne J, Dehnen S, Roling B (2013) Li10SnP2S12: an affordable Lithium superionic conductor. J Am Chem Soc 135(42):15694–15697. https://doi.org/10.1021/ja407393y
Bruce PG, Scrosati B, Tarascon J‐M (2008) Nanomaterials for rechargeable lithium batteries. Angew Chem Int Ed 47(16):2930–2946. https://doi.org/10.1002/anie.200702505
Cao Z, Xu P, Zhai H, Du S, Mandal J, Dontigny M, Zabhib K, Yang Y (2016) Ambient-air stable lithiated anode for rechargeable Li-ion batteries with high energy density. Nano Lett 16(11):7235–7240. https://doi.org/10.1021/acs.nanolett.6b03655
Capiglia C, Yang J, Imanishi N, Hirano A, Takeda Y, Yamamoto O (2002) Composite polymer electrolyte: the role of filler grain size. Solid State Ionics 154–155:7–14. https://doi.org/10.1016/S0167-2738(02)00448-4
Chan CK, Peng H, Liu G, McIlwrath K, Zhang XF, Huggins RA, Cui Y (2007) High-performance lithium battery anodes using silicon nanowires. Nat Nanotechnol 3:31. https://doi.org/10.1038/nnano.2007.411
Chen J, Asano M, Yamaki T, Yoshida M (2006) Preparation and characterization of chemically stable polymer electrolyte membranes by radiation-induced graft copolymerization of four monomers into ETFE films. J Membr Sci 269(1):194–204. https://doi.org/10.1016/j.memsci.2005.06.035
Chen JS, Li CM, Zhou WW, Yan QY, Archer LA, Lou XW (2009) One-pot formation of SnO2 hollow nanospheres and [small alpha]-Fe2O3@SnO2 nanorattles with large void space and their lithium storage properties. Nanoscale 1(2):280–285. https://doi.org/10.1039/B9NR00102F
Chen L, Wang Z, He C, Zhao N, Shi C, Liu E, Li J (2013) Porous graphitic carbon nanosheets as a high-rate anode material for lithium-ion batteries. ACS Appl Mater Interfaces 5(19):9537–9545. https://doi.org/10.1021/am402368p
Chen W, Liu Y, Ma Y, Yang W (2015) Improved performance of lithium ion battery separator enabled by co-electrospinning polyimide/poly(vinylidene fluoride-co-hexafluoropropylene) and the incorporation of TiO2-(2-hydroxyethyl methacrylate). J Power Sources 273:1127–1135. https://doi.org/10.1016/j.jpowsour.2014.10.026
Cheng C, Fan HJ (2012) Branched nanowires: synthesis and energy applications. Nano Today 7(4):327–343. https://doi.org/10.1016/j.nantod.2012.06.002
Cheng F, Zhao J, Song W, Li C, Ma H, Chen J, Shen P (2006) Facile controlled synthesis of MnO2 nanostructures of novel shapes and their application in batteries. Inorg Chem 45(5):2038–2044. https://doi.org/10.1021/ic051715b
Cheng F, Tao Z, Liang J, Chen J (2008) Template-directed materials for rechargeable Lithium-ion batteries. Chem Mater 20(3):667–681. https://doi.org/10.1021/cm702091q
Cho T-H, Tanaka M, Ohnishi H, Kondo Y, Yoshikazu M, Nakamura T, Sakai T (2010) Composite nonwoven separator for lithium-ion battery: development and characterization. J Power Sources 195(13):4272–4277. https://doi.org/10.1016/j.jpowsour.2010.01.018
Choi J, Jin J, Jung IG, Kim JM, Kim HJ, Son SU (2011) SnSe2 nanoplate-graphene composites as anode materials for lithium ion batteries. Chem Commun 47(18):5241–5243. https://doi.org/10.1039/C1CC10317B
Chou S-L, Wang J-Z, Choucair M, Liu H-K, Stride JA, Dou S-X (2010) Enhanced reversible lithium storage in a nanosize silicon/graphene composite. Electrochem Commun 12(2):303–306. https://doi.org/10.1016/j.elecom.2009.12.024
Chung S-Y, Bloking JT, Chiang Y-M (2002) Electronically conductive phospho-olivines as lithium storage electrodes. Nat Mater 1:123. https://doi.org/10.1038/nmat732
Croguennec L, Palacin MR (2015) Recent achievements on inorganic electrode materials for Lithium-ion batteries. J Am Chem Soc 137(9):3140–3156. https://doi.org/10.1021/ja507828x
Cui Y, Chai J, Du H, Duan Y, Xie G, Liu Z, Cui G (2017) Facile and reliable in situ polymerization of poly(ethyl cyanoacrylate)-based polymer electrolytes toward flexible lithium batteries. ACS Appl Mater Interfaces 9(10):8737–8741. https://doi.org/10.1021/acsami.6b16218
Czyżyk MT, Potze R, Sawatzky GA (1992) Band-theory description of high-energy spectroscopy and the electronic structure of $\mathrm{{ LiCoO}}_{2}$. Phys Rev B 46(7):3729–3735. https://doi.org/10.1103/PhysRevB.46.3729
Dahn JR, von Sacken U, Michal CA (1990) Structure and electrochemistry of Li1±yNiO2 and a new Li2NiO2 phase with the Ni(OH)2 structure. Solid State Ionics 44(1):87–97. https://doi.org/10.1016/0167-2738(90)90049-W
Daniel C, Mohanty D, Li J, Wood DL (2014) AIP Conference Proceedings 1597:26. https://doi.org/10.1063/1.4878478
Demir-Cakan R, Hu Y-S, Antonietti M, Maier J, Titirici M-M (2008) Facile one-pot synthesis of mesoporous SnO2 microspheres via nanoparticles assembly and lithium storage properties. Chem Mater 20(4):1227–1229. https://doi.org/10.1021/cm7031288
Ding YL, Zhao X-B, Xie J, Cao G-S, Zhu TJ, Yu HM, Sun CY (2011a) Double-shelled hollow microspheres of LiMn2O4 for high-performance lithium-ion batteries. J Mater Chem 21(26):9475–9479. https://doi.org/10.1039/C1JM10924C
Ding S, Chen JS, Qi G, Duan X, Wang Z, Giannelis EP, Lou XW (2011b) Formation of SnO2 hollow nanospheres inside mesoporous silica nanoreactors. J Am Chem Soc 133(1):21–23. https://doi.org/10.1021/ja108720w
Du Pasquier A, Warren PC, Culver D, Gozdz AS, Amatucci GG, Tarascon JM (2000) Plastic PVDF-HFP electrolyte laminates prepared by a phase-inversion process. Solid State Ionics 135(1):249–257. https://doi.org/10.1016/S0167-2738(00)00371-4
Dunn B, Kamath H, Tarascon J-M (2011) Electrical energy storage for the grid: a battery of choices. Science 334(6058):928 LP-–935. https://doi.org/10.1126/science.1212741
Ehrlich GM (2002) Chapter 35. In: Linden D, Reddy TB (eds) Handbook of batteries. McGraw-Hill, New York, pp 35.31–35.94
Ellis BL, Philippe K, Thierry D (2014) Three-dimensional self-supported metal oxides for advanced energy storage. Adv Mater 26(21):3368–3397. https://doi.org/10.1002/adma.201306126
Eom JY, Kwon HS, Liu J, Zhou O (2004) Lithium insertion into purified and etched multi-walled carbon nanotubes synthesized on supported catalysts by thermal CVD. Carbon 42(12):2589–2596. https://doi.org/10.1016/j.carbon.2004.05.039
Eom J, Kim D, Kwon H (2006) Effects of ball-milling on lithium insertion into multi-walled carbon nanotubes synthesized by thermal chemical vapour deposition. J Power Sources 157(1):507–514. https://doi.org/10.1016/j.jpowsour.2005.08.024
Etacheri V, Marom R, Elazari R, Salitra G, Aurbach D (2011) Challenges in the development of advanced Li-ion batteries: a review. Energy Environ Sci 4(9):3243–3262. https://doi.org/10.1039/C1EE01598B
Feng Z, Limin Q (2016) Recent progress in self-supported metal oxide nanoarray electrodes for advanced Lithium-ion batteries. Adv Sci 3(9):1600049. https://doi.org/10.1002/advs.201600049
Ferg E, Gummow RJ, de Kock A, Thackeray MM (1994) Spinel anodes for lithium-ion batteries. J Electrochem Soc 141(11):L147–L150. https://doi.org/10.1149/1.2059324
Finegan DP, Scheel M, Robinson JB, Tjaden B, Hunt I, Mason TJ et al (2015) In-operando high-speed tomography of lithium-ion batteries during thermal runaway. Nat Commun 6:6924. https://doi.org/10.1038/ncomms7924
Frackowiak E, Gautier S, Gaucher H, Bonnamy S, Beguin F (1999) Electrochemical storage of lithium in multiwalled carbon nanotubes. Carbon 37(1):61–69. https://doi.org/10.1016/S0008-6223(98)00187-0
Fuller CS, Severiens JC (1954) Mobility of impurity ions in germanium and silicon. Phys Rev 96(1):21–24. https://doi.org/10.1103/PhysRev.96.21
Futaba DN, Hata K, Yamada T, Hiraoka T, Hayamizu Y, Kakudate Y, Iijima S (2006) Shape-engineerable and highly densely packed single-walled carbon nanotubes and their application as super-capacitor electrodes. Nat Mater 5:987. https://doi.org/10.1038/nmat1782
Gallagher K, Croy J, Balasubramanian M, Bettge M, Abraham DK, Burrell A, Thackeray M (2013) Correlating hysteresis and voltage fade in lithium- and manganese-rich layered transition-metal oxide electrodes. Electrochem Commun 33:96–98. https://doi.org/10.1016/j.elecom.2013.04.022
Gao B, Bower C, Lorentzen JD, Fleming L, Kleinhammes A, Tang XP, Zhou O (2000) Enhanced saturation lithium composition in ball-milled single-walled carbon nanotubes. Chem Phys Lett 327(1):69–75. https://doi.org/10.1016/S0009-2614(00)00851-4
Geim AK, Novoselov KS (2007) The rise of graphene. Nat Mater 6:183. https://doi.org/10.1038/nmat1849
Gibot P, Casas-Cabanas M, Laffont L, Levasseur S, Carlach P, Hamelet S et al (2008) Room-temperature single-phase Li insertion/extraction in nanoscale LixFePO4. Nat Mater 7:741. https://doi.org/10.1038/nmat2245
Goodenough JB (2013) Evolution of strategies for modern rechargeable batteries. Acc Chem Res 46(5):1053–1061. https://doi.org/10.1021/ar2002705
Goodenough JB, Kim Y (2010) Challenges for rechargeable li batteries. Chem Mater 22(3):587–603. https://doi.org/10.1021/cm901452z
Goodenough JB, Park K-S (2013) The Li-ion rechargeable battery: a perspective. J Am Chem Soc 135(4):1167–1176. https://doi.org/10.1021/ja3091438
Goriparti S, Miele E, De Angelis F, Di Fabrizio E, Proietti Zaccaria R, Capiglia C (2014) Review on recent progress of nanostructured anode materials for Li-ion batteries. J Power Sources 257:421–443. https://doi.org/10.1016/j.jpowsour.2013.11.103
Grünebaum M, Hiller MM, Jankowsky S, Jeschke S, Pohl B, Schürmann T et al (2014) Synthesis and electrochemistry of polymer based electrolytes for lithium batteries. Prog Solid State Chem 42(4):85–105. https://doi.org/10.1016/j.progsolidstchem.2014.04.004
Gu M, Zhang J, Xia Y, Wang X (2007) Poly(vinylidene fluoride) crystallization behavior and membrane structure formation via thermally induced phase separation with benzophenone diluent. J Macromol Sci B 47(1):180–191. https://doi.org/10.1080/00222340701748628
Gummow RJ, de Kock A, Thackeray MM (1994) Improved capacity retention in rechargeable 4 V lithium/lithium-manganese oxide (spinel) cells. Solid State Ionics 69(1):59–67. https://doi.org/10.1016/0167-2738(94)90450-2
Guo Y-G, Hu Y-S, Sigle W, Maier J (2007) Superior electrode performance of nanostructured mesoporous TiO2 (Anatase) through efficient hierarchical mixed conducting networks. Adv Mater 19(16):2087–2091. https://doi.org/10.1002/adma.200602828
Guo YG, Hu JS, Wan LJ (2008) Nanostructured materials for electrochemical energy conversion and storage devices. Adv Mater 20(15):2878–2887. https://doi.org/10.1002/adma.200800627
Guo P, Song H, Chen X (2009) Electrochemical performance of graphene nanosheets as anode material for lithium-ion batteries. Electrochem Commun 11(6):1320–1324. https://doi.org/10.1016/j.elecom.2009.04.036
Guo J, Sun A, Wang C (2010) A porous silicon–carbon anode with high overall capacity on carbon fiber current collector. Electrochem Commun 12(7):981–984. https://doi.org/10.1016/j.elecom.2010.05.006
Han MH, Gonzalo E, Singh G, Rojo T (2015) A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries. Energy Environ Sci 8(1):81–102. https://doi.org/10.1039/C4EE03192J
Hao S, Xuemei F, Songlin X, Yishu J, Huisheng P (2016) Electrochemical capacitors with high output voltages that mimic electric eels. Adv Mater 28(10):2070–2076. https://doi.org/10.1002/adma.201505742
Haregewoin AM, Wotango AS, Hwang B-J (2016) Electrolyte additives for lithium ion battery electrodes: progress and perspectives. Energy Environ Sci 9(6):1955–1988. https://doi.org/10.1039/C6EE00123H
Hassoun J, Reale P, Scrosati B (2007) Recent advances in liquid and polymer lithium-ion batteries. J Mater Chem 17(35):3668–3677. https://doi.org/10.1039/B707040N
He M, Yuan L-X, Zhang W-X, Hu X-L, Huang Y-H (2011) Enhanced cyclability for sulfur cathode achieved by a water-soluble binder. J Phys Chem C 115(31):15703–15709. https://doi.org/10.1021/jp2043416
Herle PS, Ellis B, Coombs N, Nazar LF (2004) Nano-network electronic conduction in iron and nickel olivine phosphates. Nat Mater 3:147. https://doi.org/10.1038/nmat1063
Higgins TM, Park S-H, King PJ, Zhang CJ, McEvoy N, Berner NC et al (2016) A commercial conducting polymer as both binder and conductive additive for silicon nanoparticle-based lithium-ion battery negative electrodes. ACS Nano 10(3):3702–3713. https://doi.org/10.1021/acsnano.6b00218
Holtstiege F, Schmuch R, Winter M, Brunklaus G, Placke T (2018) New insights into the pre-lithiation kinetics of graphite anodes via nuclear magnetic resonance spectroscopy. J Power Sources 378:522–526. https://doi.org/10.1016/j.jpowsour.2017.12.069
Hongcai G, Bingkun G, Jie S, Kyusung P, Goodenough JB (2015) A composite gel–polymer/glass–fiber electrolyte for sodium-ion batteries. Adv Energy Mater 5(9):1402235. https://doi.org/10.1002/aenm.201402235
Hongsen L, Laifa S, Jie W, Bing D, Ping N, Guiyin X, Xiaogang Z (2013) Design of a nitrogen-doped, carbon-coated Li4Ti5O12 nanocomposite with a core–shell structure and its application for high-rate lithium-ion batteries. ChemPlusChem 79(1):128–133. https://doi.org/10.1002/cplu.201300316
Hori S, Suzuki K, Hirayama M, Kato Y, Saito T, Yonemura M, Kanno R (2014) Synthesis, structure, and ionic conductivity of solid solution, Li10+[small delta]M1+[small delta]P2-[small delta]S12 (M = Si, Sn). Faraday Discuss 176(0):83–94. https://doi.org/10.1039/C4FD00143E
Hosono E, Kudo T, Honma I, Matsuda H, Zhou H (2009) Synthesis of single-crystalline spinel LiMn2O4 nanowires for a lithium-ion battery with high power density. Nano Lett 9(3):1045–1051. https://doi.org/10.1021/nl803394v
Hu Y, Kong W, Li H, Huang X, Chen L (2004) Experimental and theoretical studies on reduction mechanism of vinyl ethylene carbonate on graphite anode for lithium ion batteries. Electrochem Commun 6(2):126–131. https://doi.org/10.1016/j.elecom.2003.10.024
Hu Y-S, Kinley L, Guo Y-G, Maier J (2006) High lithium electro activity of nanometer-sized rutile TiO2. Adv Mater 18(11):1421–1426. https://doi.org/10.1002/adma.200502723
Hu L, Zhang Z, Amine K (2013) Fluorinated electrolytes for Li-ion battery: an FEC-based electrolyte for high voltage LiNi0.5Mn1.5O4/graphite couple. Electrochem Commun 35:76–79. https://doi.org/10.1016/j.elecom.2013.08.009
Hu J, Tian J, Li C (2017) Nanostructured carbon nitride polymer-reinforced electrolyte to enable dendrite-suppressed lithium metal batteries. ACS Appl Mater Interfaces 9(13):11615–11625. https://doi.org/10.1021/acsami.7b00478
Huang X, Hitt J (2013) Lithium ion battery separators: development and performance characterization of a composite membrane. J Membr Sci 425–426:163–168. https://doi.org/10.1016/j.memsci.2012.09.027
Huang P, Wang Q, Li K, Ping P, Sun J (2015) The combustion behavior of large scale lithium titanate battery. Sci Rep 5:7788. https://doi.org/10.1038/srep07788
Hui Y, Zhiyuan L, Chandran BK, Jiyang D, Jiancan Y, Dianpeng Q et al (2015) Self-protection of electrochemical storage devices via a thermal reversible sol–gel transition. Adv Mater 27(37):5593–5598. https://doi.org/10.1002/adma.201502484
Huie MM, Bock DC, Takeuchi ES, Marschilok AC, Takeuchi KJ (2015) Cathode materials for magnesium and magnesium-ion based batteries. Coord Chem Rev 287:15–27. https://doi.org/10.1016/j.ccr.2014.11.005
Idota Y, Kubota T, Matsufuji A, Maekawa Y, Miyasaka T (1997) Tin-based amorphous oxide: a high-capacity lithium-ion-storage material. Science 276(5317):1395 LP-–1397. https://doi.org/10.1126/science.276.5317.1395
Irene O, de Henrik V, Bruno S, Stefano P (2016) Ionic-liquid-based polymer electrolytes for battery applications. Angew Chem Int Ed 55(2):500–513. https://doi.org/10.1002/anie.201504971
Islam MS, Fisher CAJ (2014) Chem Soc Rev 43:185–204
Itagaki M, Kobari N, Yotsuda S, Watanabe K, Kinoshita S, Ue M (2005) LiCoO2 electrode/electrolyte interface of Li-ion rechargeable batteries investigated by in situ electrochemical impedance spectroscopy. J Power Sources 148:78–84. https://doi.org/10.1016/j.jpowsour.2005.02.007
Itoh T, Miyamura Y, Ichikawa Y, Uno T, Kubo M, Yamamoto O (2003) Composite polymer electrolytes of poly(ethylene oxide)/BaTiO3/Li salt with hyperbranched polymer. J Power Sources 119–121:403–408. https://doi.org/10.1016/S0378-7753(03)00261-1
Jaiswal A, Horne CR, Chang O, Zhang W, Kong W, Wang E, Doeff MM (2009) Nanoscale LiFePO4 and Li4Ti5O12 for high rate Li-ion batteries. J Electrochem Soc 156(12):A1041–A1046. https://doi.org/10.1149/1.3223987
Jang J, Jeong S, Seo J, Kim M-C, Sim E, Oh Y, Cheon J (2011) Ultrathin zirconium disulfide nanodiscs. J Am Chem Soc 133(20):7636–7639. https://doi.org/10.1021/ja200400n
Jeong H-S, Kim D-W, Jeong YU, Lee S-Y (2010) Effect of phase inversion on microporous structure development of Al2O3/poly(vinylidene fluoride-hexafluoropropylene)-based ceramic composite separators for lithium-ion batteries. J Power Sources 195(18):6116–6121. https://doi.org/10.1016/j.jpowsour.2009.10.085
Jeong PM, Ilyoung C, Jaewan H, Onnuri K (2013) Polymer electrolytes integrated with ionic liquids for future electrochemical devices. J Appl Polym Sci 129(5):2363–2376. https://doi.org/10.1002/app.39064
Ji L, Lin Z, Alcoutlabi M, Zhang X (2011) Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries. Energy Environ Sci 4(8):2682–2699. https://doi.org/10.1039/C0EE00699H
Jian J, Yuanyuan L, Jinping L, Xintang H, Changzhou Y, Lou XW(D) (2012) Recent advances in metal oxide-based electrode architecture design for electrochemical energy storage. Adv Mater 24(38):5166–5180. https://doi.org/10.1002/adma.201202146
Jiang C, Hosono E, Zhou H (2006) Nanomaterials for lithium-ion batteries. Nano Today 1(4):28–33. https://doi.org/10.1016/S1748-0132(06)70114-1
Jiang J, Li Y, Liu J, Huang X (2011) Building one-dimensional oxide nanostructure arrays on conductive metal substrates for lithium-ion battery anodes. Nanoscale 3(1):45–58. https://doi.org/10.1039/C0NR00472C
Jin J, Wen Z, Liang X, Cui Y, Wu X (2012) Gel polymer electrolyte with ionic liquid for high performance lithium sulfur battery. Solid State Ionics 225:604–607. https://doi.org/10.1016/j.ssi.2012.03.012
Jin K, Zhou X, Zhang L, Xin X, Wang G, Liu Z (2013) Sulfur/carbon nanotube composite film as a flexible cathode for Lithium–sulfur batteries. J Phys Chem C 117(41):21112–21119. https://doi.org/10.1021/jp406757w
Jordi C, Laure M, Dominique L, Rosa PM (2010) Beyond intercalation-based Li-ion batteries: the state of the art and challenges of electrode materials reacting through conversion reactions. Adv Mater 22(35):E170–E192. https://doi.org/10.1002/adma.201000717
Julian K, Gebresilassie EG, Dominic B, Stefano P (2015) Safer electrolytes for Lithium-ion batteries: state of the art and perspectives. ChemSusChem 8(13):2154–2175. https://doi.org/10.1002/cssc.201500284
Jun C, Zhan-Liang T, Suo-Long L (2003) Lithium intercalation in open-ended TiS2 nanotubes. Angew Chem Int Ed 42(19):2147–2151. https://doi.org/10.1002/anie.200250573
Kalyana Sundaram NT, Subramania A (2007) Nano-size LiAlO2 ceramic filler incorporated porous PVDF-co-HFP electrolyte for lithium-ion battery applications. Electrochim Acta 52(15):4987–4993. https://doi.org/10.1016/j.electacta.2007.01.066
Kamaya N, Homma K, Yamakawa Y, Hirayama M, Kanno R, Yonemura M et al (2011) A lithium superionic conductor. Nat Mater 10:682. https://doi.org/10.1038/nmat3066
Kartick B, Srivastava SK, Mahanty S (2013) TiS2–MWCNT hybrid as high performance anode in lithium-ion battery. J Nanopart Res 15(9):1950. https://doi.org/10.1007/s11051-013-1950-5
Kartick B, Srivastava SK, Mahanty S (2014) Tungsten disulfide-multiwalled carbon nanotube hybrid anode for lithium-ion battery. J Nanosci Nanotechnol 14(5):3758–3764. https://doi.org/10.1166/jnn.2014.8737
Kato Y, Hori S, Saito T, Suzuki K, Hirayama M, Mitsui A et al (2016) High-power all-solid-state batteries using sulfide superionic conductors. Nat Energy 1:16030. https://doi.org/10.1038/nenergy.2016.30
Kelly JC, Degrood NL, Roberts ME (2015) Li-ion battery shut-off at high temperature caused by polymer phase separation in responsive electrolytes. Chem Commun 51(25):5448–5451. https://doi.org/10.1039/C4CC10282G
Khatib R, Dalverny A-L, Saubanère M, Gaberscek M, Doublet M-L (2013) Origin of the voltage hysteresis in the CoP conversion material for Li-ion batteries. J Phys Chem C 117(2):837–849. https://doi.org/10.1021/jp310366a
Kim H-S, Moon S-I (2005) Synthesis and electrochemical performances of di(trimethylolpropane) tetraacrylate-based gel polymer electrolyte. J Power Sources 146(1):584–588. https://doi.org/10.1016/j.jpowsour.2005.03.148
Kim H, Choi J, Sohn H, Kang T (1999) The insertion mechanism of lithium into Mg2Si anode material for Li-ion batteries. J Electrochem Soc 146(12):4401–4405. https://doi.org/10.1149/1.1392650
Kim S-S, Kadoma Y, Ikuta H, Uchimoto Y, Wakihara M (2001) Electrochemical performance of natural graphite by surface modification using aluminum. Electrochem Solid-State Lett 4(8):A109–A112. https://doi.org/10.1149/1.1379829
Kim J-W, Ji K-S, Lee J-P, Park J-W (2003) Electrochemical characteristics of two types of PEO-based composite electrolyte with functional SiO2. J Power Sources 119–121:415–421. https://doi.org/10.1016/S0378-7753(03)00263-5
Kim KM, Park N-G, Ryu KS, Chang SH (2006) Characteristics of PVdF-HFP/TiO2 composite membrane electrolytes prepared by phase inversion and conventional casting methods. Electrochim Acta 51(26):5636–5644. https://doi.org/10.1016/j.electacta.2006.02.038
Kim Y-L, Sun Y-K, Lee S-M (2008) Enhanced electrochemical performance of silicon-based anode material by using current collector with modified surface morphology. Electrochim Acta 53(13):4500–4504. https://doi.org/10.1016/j.electacta.2008.01.050
Kim Y-D, Kang J-G, Park J-G, Lee S, Kim D-W (2009) Self-supported SnO2 nanowire electrodes for high-power lithium-ion batteries. Nanotechnology 20(45):455701. https://doi.org/10.1088/0957-4484/20/45/455701
Klavetter KC, Pedro de Souza J, Heller A, Mullins CB (2015) High tap density microparticles of selenium-doped germanium as a high efficiency, stable cycling lithium-ion battery anode material. J Mater Chem A 3(11):5829–5834. https://doi.org/10.1039/C5TA00319A
Koksbang R, Barker J, Shi H, Saïdi MY (1996) Cathode materials for lithium rocking chair batteries. Solid State Ionics 84(1):1–21. https://doi.org/10.1016/S0167-2738(96)83001-3
Kuhn A, Duppel V, Lotsch BV (2013) Tetragonal Li10GeP2S12 and Li7GePS8 – exploring the li ion dynamics in LGPS li electrolytes. Energy Environ Sci 6(12):3548–3552. https://doi.org/10.1039/C3EE41728J
Kumar P, Hu LH (2018) Mater Res Express 5(2018):075510
Kumar B, Scanlon LG (1994) Polymer-ceramic composite electrolytes. J Power Sources 52(2):261–268. https://doi.org/10.1016/0378-7753(94)02147-3
Kumar P, Ming J, Li. M, Wahyudi W, Li LJ (2016) ECS- J Solid State Sci Technol 2016 5:Q3021–Q3025
Kurc B (2014) Gel electrolytes based on poly(acrylonitrile)/sulfolane with hybrid TiO2/SiO2 filler for advanced lithium polymer batteries. Electrochim Acta 125:415–420. https://doi.org/10.1016/j.electacta.2014.01.117
Lacey MJ, Jeschull F, Edström K, Brandell D (2014a) Functional, water-soluble binders for improved capacity and stability of lithium–sulfur batteries. J Power Sources 264:8–14. https://doi.org/10.1016/j.jpowsour.2014.04.090
Lacey MJ, Jeschull F, Edström K, Brandell D (2014b) Porosity blocking in highly porous carbon black by PVdF binder and its implications for the li–S system. J Phys Chem C 118(45):25890–25898. https://doi.org/10.1021/jp508137m
Lai H, Li J, Chen Z, Huang Z (2012) Carbon nanohorns as a high-performance carrier for MnO2 anode in lithium-ion batteries. ACS Appl Mater Interfaces 4(5):2325–2328. https://doi.org/10.1021/am300378w
Larcher D, Tarascon J-M (2014) Towards greener and more sustainable batteries for electrical energy storage. Nat Chem 7:19. https://doi.org/10.1038/nchem.2085
Larcher D, Masquelier C, Bonnin D, Chabre Y, Masson V, Leriche J-B, Tarascon J-M (2003) Effect of particle size on lithium intercalation into α -Fe2O3. J Electrochem Soc 150(1):A133–A139. https://doi.org/10.1149/1.1528941
Lee KT, Jung YS, Oh SM (2003) Synthesis of tin-encapsulated spherical hollow carbon for anode material in Lithium secondary batteries. J Am Chem Soc 125(19):5652–5653. https://doi.org/10.1021/ja0345524
Lee S-Y, Ogawa A, Kanno M, Nakamoto H, Yasuda T, Watanabe M (2010) Nonhumidified intermediate temperature fuel cells using protic ionic liquids. J Am Chem Soc 132(28):9764–9773. https://doi.org/10.1021/ja102367x
Lee SW, McDowell MT, Choi JW, Cui Y (2011) Anomalous shape changes of silicon nanopillars by electrochemical Lithiation. Nano Lett 11(7):3034–3039. https://doi.org/10.1021/nl201787r
Lei L, Raji AR, Tour JM (2013) Graphene-wrapped MnO2–graphene nanoribbons as anode materials for high-performance lithium ion batteries. Adv Mater 25(43):6298–6302. https://doi.org/10.1002/adma.201302915
Li Q, Bjerrum NJ (2002) Aluminum as anode for energy storage and conversion: a review. J Power Sources 110(1):1–10. https://doi.org/10.1016/S0378-7753(01)01014-X
Li H, Zhou H (2012) Enhancing the performances of Li-ion batteries by carbon-coating: present and future. Chem Commun 48(9):1201–1217. https://doi.org/10.1039/C1CC14764A
Li Z, Su G, Wang X, Gao D (2005) Micro-porous P(VDF-HFP)-based polymer electrolyte filled with Al2O3 nanoparticles. Solid State Ionics 176(23):1903–1908. https://doi.org/10.1016/j.ssi.2005.05.006
Li Y, Tan B, Wu Y (2008a) Mesoporous Co3O4 nanowire arrays for Lithium ion batteries with high capacity and rate capability. Nano Lett 8(1):265–270. https://doi.org/10.1021/nl0725906
Li ZH, Zhang P, Zhang HP, Wu YP, Zhou XD (2008b) A lotus root-like porous nanocomposite polymer electrolyte. Electrochem Commun 10(5):791–794. https://doi.org/10.1016/j.elecom.2008.02.036
Li B, Cao H, Shao J, Qu M (2011) Enhanced anode performances of the Fe3O4-carbon-rGO three dimensional composite in lithium ion batteries. Chem Commun 47(37):10374–10376. https://doi.org/10.1039/C1CC13462K
Li L, Meng F, Jin S (2012a) High-capacity Lithium-ion battery conversion cathodes based on Iron fluoride nanowires and insights into the conversion mechanism. Nano Lett 12(11):6030–6037. https://doi.org/10.1021/nl303630p
Li L, Yu Y, Meng F, Tan Y, Hamers RJ, Jin S (2012b) Facile solution synthesis of α-FeF3·3H2O nanowires and their conversion to α-Fe2O3 nanowires for photoelectrochemical application. Nano Lett 12(2):724–731. https://doi.org/10.1021/nl2036854
Li X, Li D, Qiao L, Wang X, Sun X, Wang P, He D (2012c) Interconnected porous MnO nanoflakes for high-performance lithium ion battery anodes. J Mater Chem 22(18):9189–9194. https://doi.org/10.1039/C2JM30604B
Li L, Jacobs R, Gao P, Gan L, Wang F, Morgan D, Jin S (2016) Origins of large voltage hysteresis in high-energy-density metal fluoride lithium-ion battery conversion electrodes. J Am Chem Soc 138(8):2838–2848. https://doi.org/10.1021/jacs.6b00061
Lian P, Zhu X, Xiang H, Li Z, Yang W, Wang H (2010) Enhanced cycling performance of Fe3O4–graphene nanocomposite as an anode material for lithium-ion batteries. Electrochim Acta 56(2):834–840. https://doi.org/10.1016/j.electacta.2010.09.086
Liang Z, Lin D, Zhao J, Lu Z, Liu Y, Liu C, Cui Y (2016) Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating. Proc Natl Acad Sci U S A 113(11):2862 LP-–2867. https://doi.org/10.1073/pnas.1518188113
Liao J-Y, Higgins D, Lui G, Chabot V, Xiao X, Chen Z (2013) Multifunctional TiO2–C/MnO2 Core–double-Shell nanowire arrays as high-performance 3D electrodes for lithium ion batteries. Nano Lett 13(11):5467–5473. https://doi.org/10.1021/nl4030159
Liaoyong W, Zhijie W, Yan M, Rui X, Shu-Hong Y, Yong L (2015) Designing heterogeneous 1D nanostructure arrays based on AAO templates for energy applications. Small 11(28):3408–3428. https://doi.org/10.1002/smll.201500120
Licht S, Douglas A, Ren J, Carter R, Lefler M, Pint CL (2016) Carbon nanotubes produced from ambient carbon dioxide for environmentally sustainable lithium-ion and sodium-ion battery anodes. ACS Cent Sci 2(3):162–168. https://doi.org/10.1021/acscentsci.5b00400
Limthongkul P, Jang Y-I, Dudney NJ, Chiang Y-M (2003) Electrochemically-driven solid-state amorphization in lithium-silicon alloys and implications for lithium storage. Acta Mater 51(4):1103–1113. https://doi.org/10.1016/S1359-6454(02)00514-1
Lin M-C, Gong M, Lu B, Wu Y, Wang D-Y, Guan M, Dai H (2015) An ultrafast rechargeable aluminium-ion battery. Nature 520:324. https://doi.org/10.1038/nature14340
Lin D, Liu Y, Liang Z, Lee H-W, Sun J, Wang H, Cui Y (2016) Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes. Nat Nanotechnol 11:626. https://doi.org/10.1038/nnano.2016.32
Lin D, Liu Y, Cui Y (2017) Reviving the lithium metal anode for high-energy batteries. Nat Nanotechnol 12(3):194–206. https://doi.org/10.1038/nnano.2017.16
Linden D, Reddy TB (2002) Handbook of batteries, 3rd edn. McGraw-Hill, New York
Linlin L, Shengjie P, Yanling C, Peifen T, Jin W, Grace W, Madhavi S (2013) Electrospun porous NiCo2O4 nanotubes as advanced electrodes for electrochemical capacitors. Chem Eur J 19(19):5892–5898. https://doi.org/10.1002/chem.201204153
Liu Y, Cui Y (2017) Lithium Metal Anodes: Recipe Prot Joule 1:643–650. https://doi.org/10.1016/j.joule.2017.12.001
Liu Y, Lee JY, Hong L (2002) Functionalized SiO2 in poly(ethylene oxide)-based polymer electrolytes. J Power Sources 109(2):507–514. https://doi.org/10.1016/S0378-7753(02)00167-2
Liu Y, Lee JY, Hong L (2003) Morphology, crystallinity, and electrochemical properties of in situ formed poly(ethylene oxide)/TiO2 nanocomposite polymer electrolytes. J Appl Polym Sci 89(10):2815–2822. https://doi.org/10.1002/app.12487
Liu N, Hu L, McDowell MT, Jackson A, Cui Y (2011) Prelithiated silicon nanowires as an anode for lithium-ion batteries. ACS Nano 5(8):6487–6493. https://doi.org/10.1021/nn2017167
Liu H, Su D, Wang G, Qiao SZ (2012) An ordered mesoporous WS2 anode material with superior electrochemical performance for lithium ion batteries. J Mater Chem 22(34):17437–17440. https://doi.org/10.1039/c2jm33992g
Liu N, Li W, Pasta M, Cui Y (2014a) Nanomaterials for electrochemical energy storage. Front Phys 9(3):323–350. https://doi.org/10.1007/s11467-013-0408-7
Liu Y, Wang W, Huang H, Gu L, Wang Y, Peng X (2014b) The highly enhanced performance of lamellar WS2 nanosheet electrodes upon intercalation of single-walled carbon nanotubes for supercapacitors and lithium ions batteries. Chem Commun 50(34):4485–4488
Liu C, Neale ZG, Cao G (2016a) Understanding electrochemical potentials of cathode materials in rechargeable batteries. Mater Today 19(2):109–123. https://doi.org/10.1016/j.mattod.2015.10.009
Liu Y, Lin D, Liang Z, Zhao J, Yan K, Cui Y (2016b) Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode. Nat Commun 7:10992. https://doi.org/10.1038/ncomms10992
Longwei Y, Zhiwei Z, Zhaoqiang L, Fengbin H, Qun L, Chengxiang W, Yongxin Q (2014) Spinel ZnMn2O4 nanocrystal-anchored 3D hierarchical carbon aerogel hybrids as anode materials for lithium ion batteries. Adv Funct Mater 24(26):4176–4185. https://doi.org/10.1002/adfm.201400108
Lou XW, Li CM, Archer LA (2009) Designed synthesis of coaxial SnO2@carbon hollow nanospheres for highly reversible lithium storage. Adv Mater 21(24):2536–2539. https://doi.org/10.1002/adma.200803439
Lowe M, Tokuoka S, Trigg T, Gereffi G (2010) Lithium-ion batteries for electric vehicles: the US value chain. Center on Globalization, Governance & Competitiveness Duke University, Durham
Lu W, Henry K, Turchi C, Pellegrino J (2008) Incorporating ionic liquid electrolytes into polymer gels for solid-state ultracapacitors. J Electrochem Soc 155(5):A361–A367. https://doi.org/10.1149/1.2869202
Luo W, Schardt J, Bommier C, Wang B, Razink J, Simonsen J, Ji X (2013) Carbon nanofibers derived from cellulose nanofibers as a long-life anode material for rechargeable sodium-ion batteries. J Mater Chem A 1(36):10662–10666. https://doi.org/10.1039/C3TA12389H
Maekawa H, Matsuo M, Takamura H, Ando M, Noda Y, Karahashi T, Orimo S (2009) Halide-stabilized LiBH4, a room-temperature lithium fast-ion conductor. J Am Chem Soc 131(3):894–895. https://doi.org/10.1021/ja807392k
Magistris A, Mustarelli P, Quartarone E, Tomasi C (2000) Transport and thermal properties of (PEO)n–LiPF6 electrolytes for super-ambient applications. Solid State Ionics 136–137:1241–1247. https://doi.org/10.1016/S0167-2738(00)00594-4
Mai L, Tian X, Xu X, Chang L, Xu L (2014) Nanowire electrodes for electrochemical energy storage devices. Chem Rev 114(23):11828–11862. https://doi.org/10.1021/cr500177a
Manuel Stephan A, Teeters D (2003) Characterization of PVdF-HFP polymer membranes prepared by phase inversion techniques I. morphology and charge–discharge studies. Electrochim Acta 48(14):2143–2148. https://doi.org/10.1016/S0013-4686(03)00197-X
Marcinek M, Syzdek J, Marczewski M, Piszcz M, Niedzicki L, Kalita M et al (2015) Electrolytes for Li-ion transport – review. Solid State Ionics 276:107–126. https://doi.org/10.1016/j.ssi.2015.02.006
Martin W, Besenhard JO, Spahr ME, Petr N (1999) Insertion electrode materials for rechargeable lithium batteries. Adv Mater 10(10):725–763. https://doi.org/10.1002/(SICI)1521-4095(199807)10:10<725:AID-ADMA725>3.0.CO;2-Z
Matsuo M, Nakamori Y, Orimo S, Maekawa H, Takamura H (2007) Lithium superionic conduction in lithium borohydride accompanied by structural transition. Appl Phys Lett 91(22):224103. https://doi.org/10.1063/1.2817934
Matsuo M, Remhof A, Martelli P, Caputo R, Ernst M, Miura Y et al (2009) Complex hydrides with (BH4)− and (NH2)− anions as new lithium fast-ion conductors. J Am Chem Soc 131(45):16389–16391. https://doi.org/10.1021/ja907249p
Mei L, Li C, Qu B, Zhang M, Xu C, Lei D, Wang T (2012) Small quantities of cobalt deposited on tin oxide as anode material to improve performance of lithium-ion batteries. Nanoscale 4(18):5731–5737. https://doi.org/10.1039/C2NR31307C
Meyer WH (1999) Polymer electrolytes for lithium-ion batteries. Adv Mater 10(6):439–448. https://doi.org/10.1002/(SICI)1521-4095(199804)10:6<439:AID-ADMA439>3.0.CO;2-I
Michel A (2004) Polymers with ionic conductivity. Adv Mater 2(6–7):278–286. https://doi.org/10.1002/adma.19900020603
Minsub O, Sekwon N, Chang-Su W, Jun-Ho J, Sung-Soo K, Alicja B et al (2015) Observation of electrochemically driven elemental segregation in a Si alloy thin-film anode and its effects on cyclic stability for Li-ion batteries. Adv Energy Mater 5(22):1501136. https://doi.org/10.1002/aenm.201501136
Mizushima K, Jones PC, Wiseman PJ, Goodenough JB (1980) LixCoO2 (0<x<−1): a new cathode material for batteries of high energy density. Mater Res Bull 15(6):783–789. https://doi.org/10.1016/0025-5408(80)90012-4
Mo Y, Ong SP, Ceder G (2012) First principles study of the Li10GeP2S12 Lithium super ionic conductor material. Chem Mater 24(1):15–17. https://doi.org/10.1021/cm203303y
Mohamed NS, Arof AK (2004) Investigation of electrical and electrochemical properties of PVDF-based polymer electrolytes. J Power Sources 132(1):229–234. https://doi.org/10.1016/j.jpowsour.2003.12.031
Mohtadi R, Orimo S (2016) The renaissance of hydrides as energy materials. Nat Rev Mater 2:16091. https://doi.org/10.1038/natrevmats.2016.91
Mohtadi R, Remhof A, Jena P (2016) Complex metal borohydrides: multifunctional materials for energy storage and conversion. J Phys Condens Matter 28(35):353001. https://doi.org/10.1088/0953-8984/28/35/353001
Mukhopadhyay A, Jangid MK (2018) Li metal battery, healthy self. Science 359:1463
Myung S-T, Hitoshi Y, Sun Y-K (2011) Electrochemical behavior and passivation of current collectors in lithium-ion batteries. J Mater Chem 21(27):9891–9911. https://doi.org/10.1039/C0JM04353B
Nazri GA, Pistoia P (2003) Lithium batteries: science and technology. Kluwer Academic Publishers, Boston
Nishi Y (2001) Lithium ion secondary batteries; past 10 years and the future. J Power Sources 100(1):101–106. https://doi.org/10.1016/S0378-7753(01)00887-4
Nitta N, Wu F, Lee JT, Yushin G (2015) Li-ion battery materials: present and future. Mater Today 18(5):252–264. https://doi.org/10.1016/j.mattod.2014.10.040
Nobili F, Dsoke S, Mancini M, Marassi R (2009) Interfacial properties of copper-coated graphite electrodes: coating thickness dependence. Fuel Cells 9(3):264–268. https://doi.org/10.1002/fuce.200800087
Noel M, Suryanarayanan V (2002) Role of carbon host lattices in Li-ion intercalation/de-intercalation processes. J Power Sources 111(2):193–209. https://doi.org/10.1016/S0378-7753(02)00308-7
Novoselov KS, Geim AK, Morozov SV, Jiang D, Zhang Y, Dubonos SV, Firsov AA (2004) Electric field effect in atomically thin carbon films. Science 306(5696):666 LP-–669. https://doi.org/10.1126/science.1102896
Obrovac MN, Chevrier VL (2014) Alloy negative electrodes for Li-ion batteries. Chem Rev 114(23):11444–11502. https://doi.org/10.1021/cr500207g
Oh SM, Myung ST, Park JB, Scrosati B, Amine K, Sun YK (2012) Angew Chem Int Ed 51(8):1853–1856. https://doi.org/10.1002/anie.201107394
Ohzuku T, Makimura Y (2001a) Layered lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries. Chem Lett 30(7):642–643. https://doi.org/10.1246/cl.2001.642
Ohzuku T, Makimura Y (2001b) Layered lithium insertion material of LiNi1/2Mn1/2O2: a possible alternative to LiCoO2 for advanced lithium-ion batteries. Chem Lett 30(8):744–745. https://doi.org/10.1246/cl.2001.744
Owen JR (1997) Rechargeable lithium batteries. Chem Soc Rev 26(4):259–267. https://doi.org/10.1039/CS9972600259
Palacin MR (2009) Recent advances in rechargeable battery materials: a chemist’s perspective. Chem Soc Rev 38(9):2565–2575. https://doi.org/10.1039/B820555H
Pan D, Wang S, Zhao B, Wu M, Zhang H, Wang Y, Jiao Z (2009) Li storage properties of disordered graphene nanosheets. Chem Mater 21(14):3136–3142. https://doi.org/10.1021/cm900395k
Park JK (2012) Principles and applications of lithium secondary batteries. Wiley-VCH, Weinheim
Park K-S, Benayad A, Kang D-J, Doo S-G (2008) Nitridation-driven conductive Li4Ti5O12 for lithium ion batteries. J Am Chem Soc 130(45):14930–14931. https://doi.org/10.1021/ja806104n
Peng C, Chen B, Qin Y, Yang S, Li C, Zuo Y, Yang J (2012) Facile ultrasonic synthesis of CoO quantum dot/graphene nanosheet composites with high lithium storage capacity. ACS Nano 6(2):1074–1081. https://doi.org/10.1021/nn202888d
Persson K, Sethuraman VA, Hardwick LJ, Hinuma Y, Meng YS, van der Ven A, Ceder G (2010) Lithium diffusion in graphitic carbon. J Phys Chem Lett 1(8):1176–1180. https://doi.org/10.1021/jz100188d
Pharr M, Choi YS, Lee D, Oh KH, Vlassak JJ (2016) Measurements of stress and fracture in germanium electrodes of lithium-ion batteries during electrochemical lithiation and delithiation. J Power Sources 304:164–169. https://doi.org/10.1016/j.jpowsour.2015.11.036
Poizot P, Laruelle S, Grugeon S, Dupont L, Tarascon J-M (2000) Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries. Nature 407:496. https://doi.org/10.1038/35035045
Porcarelli L, Gerbaldi C, Bella F, Nair JR (2016) Super soft all-ethylene oxide polymer electrolyte for safe all-solid Lithium batteries. Sci Rep 6:19892. Retrieved from. https://doi.org/10.1038/srep19892
Prosini PP, Villano P, Carewska M (2002) A novel intrinsically porous separator for self-standing lithium-ion batteries. Electrochim Acta 48(3):227–233. https://doi.org/10.1016/S0013-4686(02)00601-1
Pu W, He X, Wang L, Jiang C, Wan C (2006) Preparation of PVDF–HFP microporous membrane for Li-ion batteries by phase inversion. J Membr Sci 272(1):11–14. https://doi.org/10.1016/j.memsci.2005.12.038
Qiao J, Fu J, Lin R, Ma J, Liu J (2010) Alkaline solid polymer electrolyte membranes based on structurally modified PVA/PVP with improved alkali stability. Polymer 51(21):4850–4859. https://doi.org/10.1016/j.polymer.2010.08.018
Qingwen L, Yan-Bing H, Qipeng Y, Baohua L, Valentino KY, Youwei Y et al (2017) Dendrite-free, high-rate, long-life lithium metal batteries with a 3D cross-linked network polymer electrolyte. Adv Mater 29(13):1604460. https://doi.org/10.1002/adma.201604460
Ran E, Gregory S, Arnd G, Alexander P, Doron A (2011) Sulfur-impregnated activated carbon Fiber cloth as a binder-free cathode for rechargeable li-S batteries. Adv Mater 23(47):5641–5644. https://doi.org/10.1002/adma.201103274
Reddy MV, Subba Rao GV, Chowdari BVR (2013) Metal oxides and oxysalts as anode materials for li ion batteries. Chem Rev 113(7):5364–5457. https://doi.org/10.1021/cr3001884
Roberts AD, Li X, Zhang H (2014) Porous carbon spheres and monoliths: morphology control, pore size tuning and their applications as Li-ion battery anode materials. Chem Soc Rev 43(13):4341–4356. https://doi.org/10.1039/C4CS00071D
Rowsell JLC, Pralong V, Nazar LF (2001) Layered lithium Iron nitride: a promising anode material for Li-ion batteries. J Am Chem Soc 123(35):8598–8599. https://doi.org/10.1021/ja0112745
Roy P, Srivastava SK (2015) J Mater Chem A 3:2454. https://doi.org/10.1039/c4ta04980b
Ruetschi P (1977) Review on the lead—acid battery science and technology. J Power Sources 2(1):3–120. https://doi.org/10.1016/0378-7753(77)85003-9
Rui X, Zhao X, Lu Z, Tan H, Sim D, Hng HH, Yan Q (2013) Olivine-type nanosheets for lithium-ion battery cathodes. ACS Nano 7(6):5637–5646. https://doi.org/10.1021/nn4022263
Sa Q, Wang Y (2012) Ni foam as the current collector for high capacity C–Si composite electrode. J Power Sources 208:46–51. https://doi.org/10.1016/j.jpowsour.2012.02.020
Saha P, Datta MK, Velikokhatnyi OI, Manivannan A, Alman D, Kumta PN (2014) Rechargeable magnesium battery: current status and key challenges for the future. Prog Mater Sci 66:1–86. https://doi.org/10.1016/j.pmatsci.2014.04.001
Saint J, Morcrette M, Larcher D, Tarascon JM (2005) Exploring the Li–Ga room temperature phase diagram and the electrochemical performances of the LixGay alloys vs. Li. Solid State Ionics 176(1):189–197. https://doi.org/10.1016/j.ssi.2004.05.021
Sakuda A, Hayashi A, Tatsumisago M (2010) Interfacial observation between LiCoO2 electrode and Li2S−P2S5 solid electrolytes of all-solid-state lithium secondary batteries using transmission electron microscopy. Chem Mater 22(3):949–956. https://doi.org/10.1021/cm901819c
Santner HJ, Möller K-C, Ivančo J, Ramsey MG, Netzer FP, Yamaguchi S, Winter M (2003) Acrylic acid nitrile, a film-forming electrolyte component for lithium-ion batteries, which belongs to the family of additives containing vinyl groups. J Power Sources 119–121:368–372. https://doi.org/10.1016/S0378-7753(03)00268-4
Sayle TXT, Maphanga RR, Ngoepe PE, Sayle DC (2009) Predicting the electrochemical properties of MnO2 nanomaterials used in rechargeable li batteries: simulating nanostructure at the atomistic level. J Am Chem Soc 131(17):6161–6173. https://doi.org/10.1021/ja8082335
Seino Y, Ota T, Takada K, Hayashi A, Tatsumisago M (2014) A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries. Energy Environ Sci 7(2):627–631. https://doi.org/10.1039/C3EE41655K
Shakir I (2014) High performance flexible pseudocapacitor based on nano-architectured spinel nickel cobaltite anchored multiwall carbon nanotubes. Electrochim Acta 132:490–495. https://doi.org/10.1016/j.electacta.2014.03.138
Shi L, Wang Q, Li H, Wang Z, Huang X, Chen L (2001) Electrochemical performance of Ni-deposited graphite anodes for lithium secondary batteries. J Power Sources 102(1):60–67. https://doi.org/10.1016/S0378-7753(01)00773-X
Shi Y, Wang Y, Wong JI, Tan AYS, Hsu C-L, Li L-J, Yang HY (2013) Self-assembly of hierarchical MoSx/CNT nanocomposites (2<x<3): towards high performance anode materials for lithium ion batteries. Sci Rep 3:2169. https://doi.org/10.1038/srep02169
Shi T, J. JY, R ZZ, Yong Y (2014) Recent progress in research on high-voltage electrolytes for lithium-ion batteries. ChemPhysChem 15(10):1956–1969. https://doi.org/10.1002/cphc.201402175
Shim E-G, Nam T-H, Kim J-G, Kim H-S, Moon S-I (2007) Effects of functional electrolyte additives for Li-ion batteries. J Power Sources 172(2):901–907. https://doi.org/10.1016/j.jpowsour.2007.04.089
Shin BR, Nam YJ, Oh DY, Kim DH, Kim JW, Jung YS (2014) Comparative study of TiS2/li-in all-solid-state Lithium batteries using glass-ceramic Li3PS4 and Li10GeP2S12 solid electrolytes. Electrochim Acta 146:395–402. https://doi.org/10.1016/j.electacta.2014.08.139
Silbernagel BG (1975) Lithium intercalation complexes of layered transition metal dichalcogenides: an NMR survey of physical properties. Solid State Commun 17(3):361–365. https://doi.org/10.1016/0038-1098(75)90312-9
Slater MD, Donghan K, Eungje L, Johnson CS (2012) Sodium-ion batteries. Adv Funct Mater 23(8):947–958. https://doi.org/10.1002/adfm.201200691
Sobkowiak A, Roberts MR, Younesi R, Ericsson T, Häggström L, Tai C-W, Björefors F (2013) Understanding and controlling the surface chemistry of LiFeSO4F for an enhanced cathode functionality. Chem Mater 25(15):3020–3029. https://doi.org/10.1021/cm401063s
Soloveichik GL (2011) Battery technologies for large-scale stationary energy storage. Annu Rev Chem Biomol Eng 2(1):503–527. https://doi.org/10.1146/annurev-chembioeng-061010-114116
Song CJ, Lou XW(D) (2013) SnO2-based nanomaterials: synthesis and application in lithium-ion batteries. Small 9(11):1877–1893. https://doi.org/10.1002/smll.201202601
Song JY, Wang YY, Wan CC (1999) Review of gel-type polymer electrolytes for lithium-ion batteries. J Power Sources 77(2):183–197. https://doi.org/10.1016/S0378-7753(98)00193-1
Song D, Xu C, Chen Y, He J, Zhao Y, Li P, Fu F (2015) Enhanced thermal and electrochemical properties of PVDF-HFP/PMMA polymer electrolyte by TiO2 nanoparticles. Solid State Ionics 282:31–36. https://doi.org/10.1016/j.ssi.2015.09.017
Su F, Zeng J, Bao X, Yu Y, Lee JY, Zhao XS (2005) Preparation and characterization of highly ordered graphitic mesoporous carbon as a Pt catalyst support for direct methanol fuel cells. Chem Mater 17(15):3960–3967. https://doi.org/10.1021/cm0502222
Su L, Jing Y, Zhou Z (2011) Li ion battery materials with core-shell nanostructures. Nanoscale 3(10):3967–3983. https://doi.org/10.1039/C1NR10550G
Subramanian V, Zhu H, Wei B (2006) High rate reversibility anode materials of lithium batteries from vapor-grown carbon nanofibers. J Phys Chem B 110(14):7178–7183. https://doi.org/10.1021/jp057080j
Sung H, Wang Y, Wan C (1998) Preparation and characterization of poly(vinyl chloride-co-vinyl acetate)-based gel electrolytes for Li-ion batteries. J Electrochem Soc 145(4):1207–1211. https://doi.org/10.1149/1.1838440
Taberna PL, Mitra S, Poizot P, Simon P, Tarascon J-M (2006) High rate capabilities Fe3O4-based Cu nano-architectured electrodes for lithium-ion battery applications. Nat Mater 5:567. https://doi.org/10.1038/nmat1672
Tadhg K, Michael B, Ryan KM (2016) Advances in the application of silicon and germanium nanowires for high-performance lithium-ion batteries. Adv Mater 28(27):5696–5704. https://doi.org/10.1002/adma.201503978
Takada K (2013) Progress and prospective of solid-state lithium batteries. Acta Mater 61(3):759–770. https://doi.org/10.1016/j.actamat.2012.10.034
Takeda Y, Yamamoto O, Imanishi N (2016) Lithium dendrite formation on a lithium metal anode from liquid, polymer and solid electrolytes. Electrochemistry 84(4):210–218. https://doi.org/10.5796/electrochemistry.84.210
Tang M, Carter WC, Chiang Y-M (2010) Electrochemically driven phase transitions in insertion electrodes for lithium-ion batteries: examples in lithium metal phosphate olivines. Annu Rev Mater Res 40(1):501–529. https://doi.org/10.1146/annurev-matsci-070909-104435
Tang Y, Zhang Y, Li W, Ma B, Chen X (2015) Rational material design for ultrafast rechargeable lithium-ion batteries. Chem Soc Rev 44(17):5926–5940. https://doi.org/10.1039/C4CS00442F
Tao Z-L, Xu L-N, Gou X-L, Chen J, Yuan H-T (2004) TiS2 nanotubes as the cathode materials of Mg-ion batteries. Chem Commun 18:2080–2081. https://doi.org/10.1039/B403855J
Tarascon J-M, Gozdz AS, Schmutz C, Shokoohi F, Warren PC (1996) Performance of Bellcore’s plastic rechargeable Li-ion batteries. Solid State Ionics 86–88:49–54. https://doi.org/10.1016/0167-2738(96)00330-X
Thackeray MM, David WIF, Bruce PG, Goodenough JB (1983) Lithium insertion into manganese spinels. Mater Res Bull 18(4):461–472. https://doi.org/10.1016/0025-5408(83)90138-1
Thangadurai V, Narayanan S, Pinzaru D (2014) Garnet-type solid-state fast Li ion conductors for Li batteries: critical review. Chem Soc Rev 43(13):4714–4727. https://doi.org/10.1039/C4CS00020J
Uchaker E, Garcia B (2014) Mesocrystals as electrode materials for lithium-ion batteries. Nano Today 9:499–524. https://doi.org/10.1016/j.nantod.2014.06.004
Urbonaite S, Novák P (2014) Importance of “unimportant” experimental parameters in Li–S battery development. J Power Sources 249:497–502. https://doi.org/10.1016/j.jpowsour.2013.10.095
Vanchiappan A, Yun-Sung L, Srinivasan M (2015) Research progress on negative electrodes for practical Li-ion batteries: beyond carbonaceous anodes. Adv Energy Mater 5(13):1402225. https://doi.org/10.1002/aenm.201402225
Wagemaker M, Mulder FM (2013) Properties and promises of nanosized insertion materials for Li-ion batteries. Acc Chem Res 46(5):1206–1215. https://doi.org/10.1021/ar2001793
Wang Y, Cao G (2006) Synthesis and enhanced intercalation properties of nanostructured vanadium oxides. Chem Mater 18(12):2787–2804. https://doi.org/10.1021/cm052765h
Wang J, Sun X (2015) Olivine LiFePO4: the remaining challenges for future energy storage. Energy Environ Sci 8(4):1110–1138. https://doi.org/10.1039/C4EE04016C
Wang J, Raistrick ID, Huggins RA (1986) Behavior of some binary lithium alloys as negative electrodes in organic solvent-based electrolytes. J Electrochem Soc 133(3):457–460. https://doi.org/10.1149/1.2108601
Wang GX, Bewlay S, Yao J, Liu H-K, Dou SX (2004) Tungsten disulfide nanotubes for lithium storage. Electrochem Solid-State Lett 7(10):A321–A323
Wang XX, Wang JN, Chang H, Zhang YF (2007) Preparation of short carbon nanotubes and application as an electrode material in Li-ion batteries. Adv Funct Mater 17(17):3613–3618. https://doi.org/10.1002/adfm.200700319
Wang C, Li D, Too CO, Wallace GG (2009a) Electrochemical properties of graphene paper electrodes used in Lithium batteries. Chem Mater 21(13):2604–2606. https://doi.org/10.1021/cm900764n
Wang D, Choi D, Li J, Yang Z, Nie Z, Kou R et al (2009b) Self-assembled TiO2–graphene hybrid nanostructures for enhanced Li-ion insertion. ACS Nano 3(4):907–914. https://doi.org/10.1021/nn900150y
Wang G, Wang B, Wang X, Park J, Dou S, Ahn H, Kim K (2009c) Sn/graphene nanocomposite with 3D architecture for enhanced reversible lithium storage in lithium ion batteries. J Mater Chem 19(44):8378–8384. https://doi.org/10.1039/B914650D
Wang Y, Liu H, Wang K, Eiji H, Wang Y, Zhou H (2009d) Synthesis and electrochemical performance of nano-sized Li4Ti5O12 with double surface modification of Ti(III) and carbon. J Mater Chem 19(37):6789–6795. https://doi.org/10.1039/B908025B
Wang B, Wu X-L, Shu C-Y, Guo Y-G, Wang C-R (2010a) Synthesis of CuO/graphene nanocomposite as a high-performance anode material for lithium-ion batteries. J Mater Chem 20(47):10661–10664. https://doi.org/10.1039/C0JM01941K
Wang H, Cui L-F, Yang Y, Sanchez Casalongue H, Robinson JT, Liang Y, Dai H (2010b) Mn3O4−graphene hybrid as a high-capacity anode material for Lithium ion batteries. J Am Chem Soc 132(40):13978–13980. https://doi.org/10.1021/ja105296a
Wang Y, Li H, He P, Hosono E, Zhou H (2010c) Nano active materials for lithium-ion batteries. Nanoscale 2(8):1294–1305. https://doi.org/10.1039/C0NR00068J
Wang F, Robert R, Chernova NA, Pereira N, Omenya F, Badway F et al (2011a) Conversion reaction mechanisms in lithium ion batteries: study of the binary metal fluoride electrodes. J Am Chem Soc 133(46):18828–18836. https://doi.org/10.1021/ja206268a
Wang Z, Luan D, Madhavi S, Ming Li C, Lou XW(D) (2011b) α-Fe2O3 nanotubes with superior lithium storage capability. Chem Commun 47(28):8061–8063. https://doi.org/10.1039/C1CC12111A
Wang Z, Luan D, Boey FYC, Lou XW(D) (2011c) Fast formation of SnO2 nanoboxes with enhanced lithium storage capability. J Am Chem Soc 133(13):4738–4741. https://doi.org/10.1021/ja2004329
Wang Q, Ping P, Zhao X, Chu G, Sun J, Chen C (2012) Thermal runaway caused fire and explosion of lithium ion battery. J Power Sources 208:210–224. https://doi.org/10.1016/j.jpowsour.2012.02.038
Wang M, Li G, Xu H, Qian Y, Yang J (2013a) Enhanced lithium storage performances of hierarchical hollow MoS2 nanoparticles assembled from Nanosheets. ACS Appl Mater Interfaces 5(3):1003–1008. https://doi.org/10.1021/am3026954
Wang Z, Gu M, Zhou Y, Zu X, Connell JG, Xiao J, Gao F (2013b) Electron-rich driven electrochemical solid-state amorphization in Li–Si alloys. Nano Lett 13(9):4511–4516. https://doi.org/10.1021/nl402429a
Wang Z, Cao D, Xu R, Qu S, Wang Z, Lei Y (2016) Realizing ordered arrays of nanostructures: a versatile platform for converting and storing energy efficiently. Nano Energy 19:328–362. https://doi.org/10.1016/j.nanoen.2015.11.032
Wang M, Le AV, Shi Y, Noelle DJ, Wu D, Fan J, Qiao Y (2017) Sigmoidal current collector for lithium-ion battery. J Appl Phys 121(1):15303. https://doi.org/10.1063/1.4973585
Wei W, Qian S, Ye Z, Sisi H, Qingqing W, Jue D, Huisheng P (2015) A gum-like lithium-ion battery based on a novel arched structure. Adv Mater 27(8):1363–1369. https://doi.org/10.1002/adma.201405127
Weiwei Z, Chuanwei C, Jinping L, Yan TY, Jian J, Xingtao J, Jin FH (2011) Epitaxial growth of branched α-Fe2O3/SnO2 nano-heterostructures with improved lithium-ion battery performance. Adv Funct Mater 21(13):2439–2445. https://doi.org/10.1002/adfm.201100088
Wen CJ, Huggins RA (1981) Chemical diffusion in intermediate phases in the lithium-silicon system. J Solid State Chem 37(3):271–278. https://doi.org/10.1016/0022-4596(81)90487-4
Wen CJ, Boukamp BA, Huggins RA, Weppner W (1979) Thermodynamic and mass transport properties of “ LiAl ”. J Electrochem Soc 126(12):2258–2266. https://doi.org/10.1149/1.2128939
Wen Z, Itoh T, Ikeda M, Hirata N, Kubo M, Yamamoto O (2000) Characterization of composite electrolytes based on a hyperbranched polymer. J Power Sources 90(1):20–26. https://doi.org/10.1016/S0378-7753(00)00442-0
Wen LX, Ming LC, Archer LA (2009) Designed synthesis of coaxial SnO2@carbon hollow nanospheres for highly reversible lithium storage. Adv Mater 21(24):2536–2539. https://doi.org/10.1002/adma.200803439
Wen Z, Ci S, Mao S, Cui S, He Z, Chen J (2013) CNT@TiO2 nanohybrids for high-performance anode of lithium-ion batteries. Nanoscale Res Lett 8(1):499. https://doi.org/10.1186/1556-276X-8-499
Wenzel S, Randau S, Leichtweiß T, Weber DA, Sann J, Zeier WG, Janek J (2016) Direct observation of the interfacial instability of the fast ionic conductor Li10GeP2S12 at the lithium metal anode. Chem Mater 28(7):2400–2407. https://doi.org/10.1021/acs.chemmater.6b00610
Whitehead AH, Schreiber M (2005) Current collectors for positive electrodes of lithium-based batteries. J Electrochem Soc 152(11):A2105–A2113. https://doi.org/10.1149/1.2039587
Whittingham MS (1978) Chemistry of intercalation compounds: metal guests in chalcogenide hosts. Prog Solid State Chem 12(1):41–99. https://doi.org/10.1016/0079-6786(78)90003-1
Whittingham MS (2004) Lithium batteries and cathode materials. Chem Rev 104(10):4271–4302. https://doi.org/10.1021/cr020731c
Whittingham MS (2014) Ultimate limits to intercalation reactions for lithium batteries. Chem Rev 114(23):11414–11443. https://doi.org/10.1021/cr5003003
Whittingham MS, Thompson AH (1975) Intercalation and lattice expansion in titanium disulfide. J Chem Phys 62(4):1588. https://doi.org/10.1063/1.430581
Wrodnigg GH, Wrodnigg TM, Besenhard JO, Winter M (1999) Propylene sulfite as film-forming electrolyte additive in lithium ion batteries. Electrochem Commun 1(3):148–150. https://doi.org/10.1016/S1388-2481(99)00023-5
Wrodnigg GH, Besenhard JO, Winter M (2001) Cyclic and acyclic sulfites: new solvents and electrolyte additives for lithium ion batteries with graphitic anodes? J Power Sources 97–98:592–594. https://doi.org/10.1016/S0378-7753(01)00536-5
Wu M-S, Chang H-W (2013) Self-assembly of NiO-coated ZnO nanorod electrodes with core–shell nanostructures as anode materials for rechargeable lithium-ion batteries. J Phys Chem C 117(6):2590–2599. https://doi.org/10.1021/jp3079327
Wu H, Cui Y (2012) Designing nanostructured Si anodes for high energy lithium ion batteries. Nano Today 7(5):414–429. https://doi.org/10.1016/j.nantod.2012.08.004
Wu Z-S, Ren W, Wen L, Gao L, Zhao J, Chen Z, Cheng H-M (2010) Graphene anchored with Co3O4 nanoparticles as anode of Lithium ion batteries with enhanced reversible capacity and cyclic performance. ACS Nano 4(6):3187–3194. https://doi.org/10.1021/nn100740x
Wu HB, Chen JS, Hng HH, Lou XW(D) (2012) Nanostructured metal oxide-based materials as advanced anodes for lithium-ion batteries. Nanoscale 4(8):2526–2542. https://doi.org/10.1039/C2NR11966H
Wu Y, Reddy MV, Chowdari BVR, Ramakrishna S (2013) Long-term cycling studies on electrospun carbon nanofibers as anode material for lithium ion batteries. ACS Appl Mater Interfaces 5(22):12175–12184. https://doi.org/10.1021/am404216j
Wu R, Qian X, Zhou K, Wei J, Lou J, Ajayan PM (2014) Porous spinel ZnxCo3–xO4 hollow polyhedra templated for high-rate lithium-ion batteries. ACS Nano 8(6):6297–6303. https://doi.org/10.1021/nn501783n
Xi J, Tang X (2004) Enhanced lithium ion transference number and ionic conductivity of composite polymer electrolyte doped with organic–inorganic hybrid P123@SBA-15. Chem Phys Lett 400(1):68–73. https://doi.org/10.1016/j.cplett.2004.10.094
Xia H, Lai M, Lu L (2010) Nanoflaky MnO2/carbon nanotube nanocomposites as anode materials for lithium-ion batteries. J Mater Chem 20(33):6896–6902. https://doi.org/10.1039/C0JM00759E
Xia X, Tu J, Zhang Y, Wang X, Gu C, Zhao X, Fan HJ (2012) High-quality metal oxide core/shell nanowire arrays on conductive substrates for electrochemical energy storage. ACS Nano 6(6):5531–5538. https://doi.org/10.1021/nn301454q
Xiao L, Ai X, Cao Y, Yang H (2004) Electrochemical behavior of biphenyl as polymerizable additive for overcharge protection of lithium ion batteries. Electrochim Acta 49(24):4189–4196. https://doi.org/10.1016/j.electacta.2004.04.013
Xin X, Zhou X, Wu J, Yao X, Liu Z (2012) Scalable synthesis of TiO2/graphene nanostructured composite with high-rate performance for lithium ion batteries. ACS Nano 6(12):11035–11043. https://doi.org/10.1021/nn304725m
Xu K (2004) Nonaqueous liquid electrolytes for lithium-based rechargeable batteries. Chem Rev 104(10):4303–4418. https://doi.org/10.1021/cr030203g
Xu JJ, Ye H (2005) Polymer gel electrolytes based on oligomeric polyether/cross-linked PMMA blends prepared via in situ polymerization. Electrochem Commun 7(8):829–835. https://doi.org/10.1016/j.elecom.2005.04.034
Xu K, Ding MS, Zhang S, Allen JL, Jow TR (2002) An attempt to formulate nonflammable lithium ion electrolytes with alkyl phosphates and phosphazenes. J Electrochem Soc 149(5):A622–A626. https://doi.org/10.1149/1.1467946
Xu L, Kim C, Shukla AK, Dong A, Mattox TM, Milliron DJ, Cabana J (2013) Monodisperse Sn nanocrystals as a platform for the study of mechanical damage during electrochemical reactions with Li. Nano Lett 13(4):1800–1805. https://doi.org/10.1021/nl400418c
Yabuuchi N, Kubota K, Dahbi M, Komaba S (2014) Research development on sodium-ion batteries. Chem Rev 114(23):11636–11682. https://doi.org/10.1021/cr500192f
Yan H, Ming Z, Fukuan S, Xiaoying L, Zijie T, Yukun W, Chunyi Z (2017) An intrinsically stretchable and compressible supercapacitor containing a polyacrylamide hydrogel electrolyte. Angew Chem Int Ed 56(31):9141–9145. https://doi.org/10.1002/anie.201705212
Yang Z, Wu H-Q, Simard B (2002) Charge–discharge characteristics of raw acid-oxidized carbon nanotubes. Electrochem Commun 4(7):574–578. https://doi.org/10.1016/S1388-2481(02)00384-3
Yang Z, Zhang J, Kintner-Meyer MCW, Lu X, Choi D, Lemmon JP, Liu J (2011) Electrochemical energy storage for green grid. Chem Rev 111(5):3577–3613. https://doi.org/10.1021/cr100290v
Yang J, Han X, Zhang X, Cheng F, Chen J (2013) Nano Res 6(9):679–687. https://doi.org/10.1007/s12274-013-0343-5
Yao XL, Xie S, Chen CH, Wang QS, Sun JH, Li YL, Lu SX (2005) Comparative study of trimethyl phosphite and trimethyl phosphate as electrolyte additives in lithium ion batteries. J Power Sources 144(1):170–175. https://doi.org/10.1016/j.jpowsour.2004.11.042
Ye Z, Yang Z, Xunliang C, Wei W, Jing R, Xin F et al (2015) Realizing both high energy and high power densities by twisting three carbon-nanotube-based hybrid fibers. Angew Chem Int Ed 54(38):11177–11182. https://doi.org/10.1002/anie.201506142
Yin SY, Song L, Wang XY, Zhang MF, Zhang KL, Zhang YX (2009) Synthesis of spinel Li4Ti5O12 anode material by a modified rheological phase reaction. Electrochim Acta 54(24):5629–5633. https://doi.org/10.1016/j.electacta.2009.04.067
Yonggang W, Yarong W, Eiji H, Kaixue W, Haoshen Z (2008) The design of a LiFePO4/carbon nanocomposite with a core–shell structure and its synthesis by an in situ polymerization restriction method. Angew Chem Int Ed 47(39):7461–7465. https://doi.org/10.1002/anie.200802539
Yoo E, Kim J, Hosono E, Zhou H, Kudo T, Honma I (2008) Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries. Nano Lett 8(8):2277–2282. https://doi.org/10.1021/nl800957b
Yoon S, Park C-M, Sohn H-J (2008) Electrochemical characterizations of germanium and carbon-coated germanium composite anode for lithium-ion batteries. Electrochem Solid-State Lett 11(4):A42–A45. https://doi.org/10.1149/1.2836481
Yoon SJ, Myung ST, Noh HJ, Lu J, Amine K, Sun YK (2014) ChemSusChem 7(12):3295–3303
Yoshimoto N, Niida Y, Egashira M, Morita M (2006) Nonflammable gel electrolyte containing alkyl phosphate for rechargeable lithium batteries. J Power Sources 163(1):238–242. https://doi.org/10.1016/j.jpowsour.2006.02.090
Youn DH, Meyerson ML, Klavetter KC, Friedman KA, Coffman SS, Lee J-W et al (2016) Mixing super P-Li with N-doped mesoporous templated carbon improves the high rate performance of a potential lithium ion battery anode. J Electrochem Soc 163(6):A953–A957. https://doi.org/10.1149/2.0771606jes
Young T-H, Chen L-W (1995) Pore formation mechanism of membranes from phase inversion process. Desalination 103(3):233–247. https://doi.org/10.1016/0011-9164(95)00076-3
Yuan L-X, Wang Z-H, Zhang W-X, Hu X-L, Chen J-T, Huang Y-H, Goodenough JB (2011) Development and challenges of LiFePO4 cathode material for lithium-ion batteries. Energy Environ Sci 4(2):269–284. https://doi.org/10.1039/C0EE00029A
Yuan-Li D, Jian X, Gao-Shao C, Tie-Jun Z, Hong-Ming Y, Xin-Bing Z (2010) Single-crystalline LiMn2O4 nanotubes synthesized via template-engaged reaction as cathodes for high-power lithium-ion batteries. Adv Funct Mater 21(2):348–355. https://doi.org/10.1002/adfm.201001448
Yue W, Lin Z, Jiang S, Yang X (2012) Preparation of graphene-encapsulated mesoporous metal oxides and their application as anode materials for lithium-ion batteries. J Mater Chem 22(32):16318–16323. https://doi.org/10.1039/C2JM30805C
Zaghib K, Mauger A, Gendron F, Julien CM (2008) Surface effects on the physical and electrochemical properties of thin LiFePO4 particles. Chem Mater 20(2):462–469. https://doi.org/10.1021/cm7027993
Zhang SS (2007) A review on the separators of liquid electrolyte Li-ion batteries. J Power Sources 164(1):351–364. https://doi.org/10.1016/j.jpowsour.2006.10.065
Zhang SS (2012) Binder based on polyelectrolyte for high capacity density lithium/sulfur battery. J Electrochem Soc 159(8):A1226–A1229. https://doi.org/10.1149/2.039208jes
Zhang SS, Xu K, Jow TR (2003) Alkaline composite film as a separator for rechargeable lithium batteries. J Solid State Electrochem 7(8):492–496. https://doi.org/10.1007/s10008-003-0375-y
Zhang L-S, Jiang L-Y, Yan H-J, Wang WD, Wang W, Song W-G, Wan L-J (2010a) Mono dispersed SnO2 nanoparticles on both sides of single layer graphene sheets as anode materials in Li-ion batteries. J Mater Chem 20(26):5462–5467. https://doi.org/10.1039/C0JM00672F
Zhang M, Lei D, Yin X, Chen L, Li Q, Wang Y, Wang T (2010b) Magnetite/graphene composites: microwave irradiation synthesis and enhanced cycling and rate performances for lithium ion batteries. J Mater Chem 20(26):5538–5543. https://doi.org/10.1039/C0JM00638F
Zhang Z, Bao W, Lu H, Jia M, Xie K, Lai Y, Li J (2012) Water-soluble Polyacrylic acid as a binder for sulfur cathode in lithium-sulfur battery. ECS Electrochem Lett 1(2):A34–A37. https://doi.org/10.1149/2.009202eel
Zhang K, Kim H-J, Shi X, Lee J-T, Choi J-M, Song M-S, Park JH (2013a) Graphene/acid coassisted synthesis of ultrathin MoS2 nanosheets with outstanding rate capability for a lithium battery anode. Inorg Chem 52(17):9807–9812. https://doi.org/10.1021/ic400735f
Zhang Q, Uchaker E, Candelaria SL, Cao G (2013b) Nanomaterials for energy conversion and storage. Chem Soc Rev 42(7):3127–3171. https://doi.org/10.1039/C3CS00009E
Zhang X, Cheng F, Yang J, Chen J (2013c) LiNi0.5Mn1.5O4 porous nanorods as high-rate and long-life cathodes for Li-ion batteries. Nano Lett 13(6):2822–2825. https://doi.org/10.1021/nl401072x
Zhang J, Sun B, Huang X, Chen S, Wang G (2014) Honeycomb-like porous gel polymer electrolyte membrane for lithium ion batteries with enhanced safety. Sci Rep 4:6007. https://doi.org/10.1038/srep06007
Zhang J, Ge H, Li Z, Ding Z (2015a) Internal heating of lithium-ion batteries using alternating current based on the heat generation model in frequency domain. J Power Sources 273:1030–1037. https://doi.org/10.1016/j.jpowsour.2014.09.181
Zhang M, Wang T, Cao G (2015b) Promises and challenges of tin-based compounds as anode materials for lithium-ion batteries. Int Mater Rev 60(6):330–352. https://doi.org/10.1179/1743280415Y.0000000004
Zhang S, Cao J, Shang Y, Wang L, He X, Li J, Wang Y (2015c) Nanocomposite polymer membrane derived from nano TiO2-PMMA and glass fiber nonwoven: high thermal endurance and cycle stability in lithium ion battery applications. J Mater Chem A 3(34):17697–17703. https://doi.org/10.1039/C5TA02781K
Zhang B, Dugas R, Rousse G, Rozier P, Abakumov AM, Tarascon J-M (2016) Insertion compounds and composites made by ball milling for advanced sodium-ion batteries. Nat Commun 7:10308. Retrieved from. https://doi.org/10.1038/ncomms10308
Zhao C, Wang C, Yue Z, Shu K, Wallace GG (2013) Intrinsically stretchable supercapacitors composed of polypyrrole electrodes and highly stretchable gel electrolyte. ACS Appl Mater Interfaces 5(18):9008–9014. https://doi.org/10.1021/am402130j
Zhao H, Zhou M, Wen L, Lei Y (2015) Template-directed construction of nanostructure arrays for highly-efficient energy storage and conversion. Nano Energy 13:790–813. https://doi.org/10.1016/j.nanoen.2015.02.024
Zheng GY et al (2014a) Interconnected hollow carbon nanospheres for stable lithium metal anodes. Nat Nanotechnol 9:618–623. https://doi.org/10.1038/nnano.2014.152
Zheng F, Zhu D, Chen Q (2014b) Facile fabrication of porous NixCo3–xO4 nanosheets with enhanced electrochemical performance as anode materials for Li-ion batteries. ACS Appl Mater Interfaces 6(12):9256–9264. https://doi.org/10.1021/am501512j
Zhi M, Xiang C, Li J, Li M, Wu N (2013) Nanostructured carbon-metal oxide composite electrodes for supercapacitors: a review. Nanoscale 5(1):72–88. https://doi.org/10.1039/C2NR32040A
Zhou S, Liu X, Wang D (2010) Si/TiSi2 hetero nanostructures as high-capacity anode material for Li-ion batteries. Nano Lett 10(3):860–863. https://doi.org/10.1021/nl903345f
Zhou G, Wang D-W, Yin L-C, Li N, Li F, Cheng H-M (2012) Oxygen bridges between NiO nanosheets and graphene for improvement of lithium storage. ACS Nano 6(4):3214–3223. https://doi.org/10.1021/nn300098m
Zhu X, Zhu Y, Murali S, Stoller MD, Ruoff RS (2011) Nanostructured reduced graphene oxide/Fe2O3 composite as a high-performance anode material for lithium ion batteries. ACS Nano 5(4):3333–3338. https://doi.org/10.1021/nn200493r
Zou Y, Kan J, Wang Y (2011) Fe2O3-graphene rice-on-sheet nanocomposite for high and fast lithium ion storage. J Phys Chem C 115(42):20747–20753. https://doi.org/10.1021/jp206876t
Zoulalian V, Monge S, Zürcher S, Textor M, Robin JJ, Tosatti S (2006) Functionalization of titanium oxide surfaces by means of poly(alkyl-phosphonates). J Phys Chem B 110(51):25603–25605. https://doi.org/10.1021/jp066811s
Acknowledgments
We acknowledge the Department of Science & Technology-Science, Engineering Research Board (DST-SERB) and the Council of Scientific & Industrial Research (CSIR), New Delhi, India, for providing financial support.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Kumar, P., Dwivedi, P.K., Yadav, P., Shelke, M.V. (2019). Nanostructured Materials for Li-Ion Battery Applications. In: Rajendran, S., Naushad, M., Raju, K., Boukherroub, R. (eds) Emerging Nanostructured Materials for Energy and Environmental Science. Environmental Chemistry for a Sustainable World, vol 23. Springer, Cham. https://doi.org/10.1007/978-3-030-04474-9_3
Download citation
DOI: https://doi.org/10.1007/978-3-030-04474-9_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-04473-2
Online ISBN: 978-3-030-04474-9
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)