Abstract
Explains the detailed procedure of creating artificial antibodies using Molecular Imprinted Polymers (MIPs). A novel sensing technique for the recognition of CTx-I by combining electrochemical impedance spectroscopy and MIP technology is also explained in this chapter. Moreover, the role of the coating thickness on the sensitivity of the planar interdigital sensors is investigated.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bolisay LD, Culver JN, Kofinas P (2006) Molecularly imprinted polymers for tobacco mosaic virus recognition. Biomaterials 27(22):4165–4168
Trotta F, Drioli E, Baggiani C, Lacopo D (2002) Molecular imprinted polymeric membrane for naringin recognition. J Membr Sci 201(1):77–84
Odabaşi M, Say R, Denizli A (2007) Molecular imprinted particles for lysozyme purification. Mater Sci Eng C 27(1):90–99
Huo H, Su H, Tan T (2009) Adsorption of Ag+ by a surface molecular-imprinted biosorbent. Chem Eng J 150(1):139–144
Sellergren B (1994) Direct drug determination by selective sample enrichment on an imprinted polymer. Anal Chem 66(9):1578–1582
Ye L, Haupt K (2004) Molecularly imprinted polymers as antibody and receptor mimics for assays, sensors and drug discovery. Anal Bioanal Chem 378(8):1887–1897
Vlatakis G, Andersson LI, Müller R, Mosbach K (1993) Drug assay using antibody mimics made by molecular imprinting. Nature 361(6413):645
Takeuchi T, Mukawa T, Matsui J, Higashi M, Shimizu KD (2001) Molecularly imprinted polymers with metalloporphyrin-based molecular recognition sites coassembled with methacrylic acid. Anal Chem 73(16):3869–3874
Vallano PT, Remcho VT (2000) Affinity screening by packed capillary high-performance liquid chromatography using molecular imprinted sorbents: I. Demonstration of feasibility. J Chromatogr A 888(1):23–34
Li Y, Ma Q, Liu Z, Wang X, Su X (2014) A novel enzyme-mimic nanosensor based on quantum dot-Au nanoparticle@ silica mesoporous microsphere for the detection of glucose. Anal Chim Acta 840:68–74
Ersöz A, Gavalas VG, Bachas LG (2002) Potentiometric behavior of electrodes based on overoxidized polypyrrole films. Anal Bioanal Chem 372(7–8):786–790
Hedborg E, Winquist F, Lundström I, Andersson LI, Mosbach K (1993) Some studies of molecularly-imprinted polymer membranes in combination with field-effect devices. Sens Actuators A 37:796–799
áL Panasyuk T, áM Sergeeva L (1999) Conductimetric sensor for atrazine detection based on molecularly imprinted polymer membranes. Analyst 124(3):331–334
Malitesta C, Losito I, Zambonin PG (1999) Molecularly imprinted electrosynthesized polymers: new materials for biomimetic sensors. Anal Chem 71(7):1366–1370
Andrea P, Stanislav M (2001) A solid binding matrix/molecularly imprinted polymer-based sensor system for the determination of clenbuterol in bovine liver using differential-pulse voltammetry. Sens Actuators B Chem 76(1):286–294
Cheng Z, Wang E, Yang X (2001) Capacitive detection of glucose using molecularly imprinted polymers. Biosens Bioelectron 16(3):179–185
Yin J, Yang G, Chen Y (2005) Rapid and efficient chiral separation of nateglinide and its l-enantiomer on monolithic molecularly imprinted polymers. J Chromatogr A 1090(1):68–75
Yan H, Row KH (2006) Characteristic and synthetic approach of molecularly imprinted polymer. Int J Mol Sci 7(5):155–178
Owens PK, Karlsson L, Lutz E, Andersson LI (1999) Molecular imprinting for bio-and pharmaceutical analysis. TrAC Trends Anal Chem 18(3):146–154
Kempe M, Mosbach K (1995) Receptor binding mimetics: a novel molecularly imprinted polymer. Tetrahedron Lett 36(20):3563–3566
Rimmer S (1998) Synthesis of molecular imprinted polymer networks. Chromatographia 47(7–8):470–474
Zia AI, Mukhopadhyay SC, Yu P-L, Al-Bahadly I, Gooneratne CP, Kosel J (2015) Rapid and molecular selective electrochemical sensing of phthalates in aqueous solution. Biosens Bioelectron 67:342–349
Hirayama K, Sakai Y, Kameoka K, Noda K, Naganawa R (2002) Preparation of a sensor device with specific recognition sites for acetaldehyde by molecular imprinting technique. Sens Actuators B Chem 86(1):20–25
Dickert F, Lieberzeit P, Tortschanoff M (2000) Molecular imprints as artificial antibodies—a new generation of chemical sensors. Sens Actuators B Chem 65(1):186–189
Sharma PS, D’Souza F, Kutner W (2012) Molecular imprinting for selective chemical sensing of hazardous compounds and drugs of abuse. TrAC Trends Anal Chem 34:59–77
Chianella I, Lotierzo M, Piletsky SA, Tothill IE, Chen B, Karim K, Turner AP (2002) Rational design of a polymer specific for microcystin-LR using a computational approach. Anal Chem 74(6):1288–1293
Ye L, Mosbach K (2001) Molecularly imprinted microspheres as antibody binding mimics. React Funct Polym 48(1):149–157
Lavignac N, Allender CJ, Brain KR (2004) Current status of molecularly imprinted polymers as alternatives to antibodies in sorbent assays. Anal Chim Acta 510(2):139–145
Liu F, Liu X, Ng S-C, Chan HS-O (2006) Enantioselective molecular imprinting polymer coated QCM for the recognition of l-tryptophan. Sens Actuators B Chem 113(1):234–240
Spégel P, Schweitz L, Nilsson S (2003) Molecularly imprinted polymers in capillary electrochromatography: recent developments and future trends. Electrophoresis 24(22–23):3892–3899
Ul-Haq N, Park JK (2008) Optical resolution of phenylalanine using D-Phe-imprinted poly (acrylic acid-co-acrylonitrile) membrane—racemate solution concentration effect. Polym Compos 29(9):1006–1013
Ellwanger A, Berggren C, Bayoudh S, Crecenzi C, Karlsson L, Owens PK, Ensing K, Cormack P, Sherrington D, Sellergren B (2001) Evaluation of methods aimed at complete removal of template from molecularly imprinted polymers. Analyst 126(6):784–792
Khan H, Park JK (2006) The preparation of D-phenylalanine imprinted microbeads by a novel method of modified suspension polymerization. Biotechnol Bioprocess Eng 11(6):503–509
Hart BR, Rush DJ, Shea KJ (2000) Discrimination between enantiomers of structurally related molecules: separation of benzodiazepines by molecularly imprinted polymers. J Am Chem Soc 122(3):460–465
Kugimiya A, Matsui J, Takeuchi T, Yano K, Muguruma H, Elgersma A, Karube I (1995) Recognition of sialic acid using molecularly imprinted polymer. Polym Plast Technol Eng 28(13):2317–2323
Sarhan A, Wulff G (1982) On polymers with enzyme-analogous structure. 14. Stereospecific binding by amide bonding or electrostatic interaction. Makromol Chem Macromol Chem Phys 183(7):1603–1614
Andersson LI (2000) Molecular imprinting: developments and applications in the analytical chemistry field. J Chromatogr B Biomed Sci Appl 745(1):3–13
Svenson J, Karlsson JG, Nicholls IA (2004) 1H nuclear magnetic resonance study of the molecular imprinting of (−)-nicotine: template self-association, a molecular basis for cooperative ligand binding. J Chromatogr A 1024(1):39–44
Spivak DA (2005) Optimization, evaluation, and characterization of molecularly imprinted polymers. Adv Drug Deliv Rev 57(12):1779–1794
Ekberg B, Mosbach K (1989) Molecular imprinting: a technique for producing specific separation materials. Trends Biotechnol 7(4):92–96
Sellergren B (1989) Molecular imprinting by noncovalent interactions. Enantioselectivity and binding capacity of polymers prepared under conditions favoring the formation of template complexes. Die Makromol Chem 190(11):2703–2711
Kim H, Spivak DA (2003) New insight into modeling non-covalently imprinted polymers. J Am Chem Soc 125(37):11269–11275
Esfandyari-Manesh M, Javanbakht M, Atyabi F, Badiei A, Dinarvand R (2011) Effect of porogenic solvent on the morphology, recognition and release properties of carbamazepine-molecularly imprinted polymer nanospheres. J Appl Polym Sci 121(2):1118–1126
Wulff G, Sarhan A, Zabrocki K (1973) Enzyme-analogue built polymers and their use for the resolution of racemates. Tetrahedron Lett 14(44):4329–4332
Li P, Rong F, Yuan C (2003) Morphologies and binding characteristics of molecularly imprinted polymers prepared by precipitation polymerization. Polym Int 52(12):1799–1806
Wang J, Cormack PA, Sherrington DC, Khoshdel E (2003) Monodisperse, molecularly imprinted polymer microspheres prepared by precipitation polymerization for affinity separation applications. Angew Chem Int Ed 42(43):5336–5338
Mayes AG, Mosbach K (1996) Molecularly imprinted polymer beads: suspension polymerization using a liquid perfluorocarbon as the dispersing phase. Anal Chem 68(21):3769–3774
Shen X, Zhou T, Ye L (2012) Molecular imprinting of protein in pickering emulsion. Chem Commun 48(66):8198–8200
Noh MW, Lee DC (1999) Synthesis and characterization of PS-clay nanocomposite by emulsion polymerization. Polym Bull 42(5):619–626
Ersöz A, Denizli A, Özcan A, Say R (2005) Molecularly imprinted ligand-exchange recognition assay of glucose by quartz crystal microbalance. Biosens Bioelectron 20(11):2197–2202
Wang C, Javadi A, Ghaffari M, Gong S (2010) A pH-sensitive molecularly imprinted nanospheres/hydrogel composite as a coating for implantable biosensors. Biomaterials 31(18):4944–4951
Mamishev AV, Sundara-Rajan K, Fumin Y, Yanqing D, Zahn M (2004) Interdigital sensors and transducers. Proc IEEE 92(5):808–845. https://doi.org/10.1109/JPROC.2004.826603
Coan T, Barroso GS, Motz G, Bolzán A, Machado RAF (2013) Preparation of PMMA/hBN composite coatings for metal surface protection. Mater Res 16(6):1366–1372
Wang H-C, Zyuzin A, Mamishev AV (2014) Measurement of coating thickness and loading using concentric fringing electric field sensors. IEEE Sens J 14(1):68–78
Azmi A, Azman AA, Kaman KK, Ibrahim S, Mukhopadhyay SC, Nawawi SW, Yunus MAM (2017) Performance of coating materials on planar electromagnetic sensing array to detect water contamination. IEEE Sens J 17(16):5244–5251
Snoeijer J, Ziegler J, Andreotti B, Fermigier M, Eggers J (2008) Thick films of viscous fluid coating a plate withdrawn from a liquid reservoir. Phys Rev Lett 100(24):244502
Krishnan S, Weinman CJ, Ober CK (2008) Advances in polymers for anti-biofouling surfaces. J Mater Chem 18(29):3405–3413
Nel AE, Mädler L, Velegol D, Xia T, Hoek EM, Somasundaran P, Klaessig F, Castranova V, Thompson M (2009) Understanding biophysicochemical interactions at the nano–bio interface. Nat Mater 8(7):543–557
Yola ML, Eren T, Atar N (2015) A sensitive molecular imprinted electrochemical sensor based on gold nanoparticles decorated graphene oxide: application to selective determination of tyrosine in milk. Sens Actuators B Chem 210:149–157
Aghaei A, Hosseini MRM, Najafi M (2010) A novel capacitive biosensor for cholesterol assay that uses an electropolymerized molecularly imprinted polymer. Electrochim Acta 55(5):1503–1508
Viswanathan S, Rani C, Ribeiro S, Delerue-Matos C (2012) Molecular imprinted nanoelectrodes for ultra sensitive detection of ovarian cancer marker. Biosens Bioelectron 33(1):179–183
Nebi M, Peker D (2016) Effect of heat treatment on the structural properties of TiO2 films produced by sol-gel spin coating technique. In: Journal of physics: conference series, vol 1. IOP Publishing, UK, p 012026
Ilican S (2016) Structural, optical and electrical properties of erbium-doped ZnO thin films prepared by spin coating method. J Nanoelectronics Optoelectron 11(4):465–471
Wong M, Ishige R, White KL, Li P, Kim D, Krishnamoorti R, Gunther R, Higuchi T, Jinnai H, Takahara A (2014) Large-scale self-assembled zirconium phosphate smectic layers via a simple spray-coating process. Nat Commun 5:3589
Guo Y, Li W, Yu H, Perepichka DF, Meng H (2017) Flexible asymmetric supercapacitors via spray coating of a new electrochromic donor–acceptor polymer. Adv Energy Mater 7(2):1601623
Grosso D (2011) How to exploit the full potential of the dip-coating process to better control film formation. J Mater Chem 21(43):17033–17038
Chaki SH, Deshpande M, Tailor JP (2014) Characterization of CuS nanocrystalline thin films synthesized by chemical bath deposition and dip coating techniques. Thin Solid Films 550:291–297
Ashiri R, Nemati A, Ghamsari MS (2014) Crack-free nanostructured BaTiO3 thin films prepared by sol–gel dip-coating technique. Ceram Int 40(6):8613–8619
Zhang X, Ye H, Xiao B, Yan L, Lv H, Jiang B (2010) Sol–gel preparation of PDMS/Silica hybrid antireflective coatings with controlled thickness and durable antireflective performance. J Phys Chem C 114(47):19979–19983
Alexander C, Andersson HS, Andersson LI, Ansell RJ, Kirsch N, Nicholls IA, O’Mahony J, Whitcombe MJ (2006) Molecular imprinting science and technology: a survey of the literature for the years up to and including 2003. J Mol Recognit 19(2):106–180
Bossi A, Bonini F, Turner A, Piletsky S (2007) Molecularly imprinted polymers for the recognition of proteins: the state of the art. Biosens Bioelectron 22(6):1131–1137
Díaz-Díaz G, Antuña-Jiménez D, Carmen Blanco-López M, Jesús Lobo-Castañón M, Miranda-Ordieres AJ, Tuñón-Blanco P (2012) New materials for analytical biomimetic assays based on affinity and catalytic receptors prepared by molecular imprinting. TrAC Trends Anal Chem 33:68–80
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Afsarimanesh, N., Mukhopadhyay, S.C., Kruger, M. (2019). MIP-Based Sensor for CTx-I Detection. In: Electrochemical Biosensor: Point-of-Care for Early Detection of Bone Loss. Smart Sensors, Measurement and Instrumentation, vol 30. Springer, Cham. https://doi.org/10.1007/978-3-030-03706-2_5
Download citation
DOI: https://doi.org/10.1007/978-3-030-03706-2_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-03705-5
Online ISBN: 978-3-030-03706-2
eBook Packages: EngineeringEngineering (R0)