Abstract
Deep rolling is widely applied to plastically deform specimens. The resulting plastic deformation depends on the process parameters and on the material properties of the deformed parts. As the material properties depend e.g. on the microstructure, within this work deep rolling is used to gain information about the influence of the microstructure on the plastic deformation. Therefore, fast and easily determinable material-specific variables, so called descriptors, are determined. The examination of macro samples with different heat treatments shows an influence of the workpiece hardness and a smaller change due to the different microstructures. Considering equivalent stresses, a process parameter independent analysis was performed. The descriptors determined for macro and additionally processed micro samples showed a progressive trend, which is why a scaling from macro to micro descriptors within the framework of subsequent work is conceivable.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Yang, K.H.: Material laws and properties. In: Basic Finite Element Method as Applied to Injury Biomechanics, pp. 231–256 (2017)
Holmes, M.: Aerospace looks to composites for solutions. Reinf. Plast. 61(4), 237–241 (2017)
Macherauch, E., Zoch, H.: Praktikum in Werkstoffkunde, 11th edn. Vieweg+Teubner Verlag/Springer Fachmedien Wiesbaden GmbH Wiesbaden, Wiesbaden (2011)
Thelning, K.E. (ed.): Steel and Its Heat Treatment. Butterworth-Heinemann, Oxford (2013)
Mädler, L.: Is High-throughput screening for structural materials/metals possible? In: Proceedings of the 4th International Conference on Nanomanufacturing (2014)
Ellendt, N., Mädler, L.: High-troughput exploration of evolutionary structural materials. HTM, 175–186 (2018)
Schulze, V.: Modern mechanical surface treatment: states, stability, effects, Zugl.: Karlsruhe, Univ., Habil.-Schr., 2004, vol. 1. Wiley-VCH Verl., Weinheim (2006)
Meyer, D., Kämmler, J.: Surface integrity of AISI 4140 after deep rolling with varied external and internal loads. Procedia CIRP 45, 363–366 (2016)
Hertz, H.: Ueber die Berührung fester elastischer Körper. Journal für die reine und angewandte Mathematik (Crelle’s Journal) 1882(92) (1881)
Czichos, H., Hennecke, M. (eds.): HÜTTE - Das Ingenieurwissen, 32., aktualisierte Auflage ed. Springer, Heidelberg (2012)
Ellendt, N., Ciftci, N., Goodreau, C., Uhlenwinkel, V., Mädler, L.: Solidification of single droplets under combined cooling conditions. In: IOP Conference Series: Materials Science and Engineering, vol. 117, p. 12057 (2016)
Röttger, K.: Walzen hartgedrehter Oberflächen, Shaker, Aachen, XI, 154, 6 S. (2003)
Information on: https://www.yumpu.com/de/document/view/7952008/das-ist-hartmetall-sandvik
Acknowledgement
Financial support of the subproject U04 ‘Mechanical Treatment’ of the Collaborative Research Center SFB 1232 “Farbige Zustände” by the German Research Foundation (DFG) is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Wielki, N., Kämmler, J., Guba, N., Meyer, D. (2019). Material Characterization Based on Deep Rolling Utilizing Process Dependent Descriptors. In: Schmitt, R., Schuh, G. (eds) Advances in Production Research. WGP 2018. Springer, Cham. https://doi.org/10.1007/978-3-030-03451-1_41
Download citation
DOI: https://doi.org/10.1007/978-3-030-03451-1_41
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-03450-4
Online ISBN: 978-3-030-03451-1
eBook Packages: EngineeringEngineering (R0)