Abstract
Two new signal-based and one model-based fault detection methods using canonical polyadic (CP) tensor decomposition algorithms are presented, and application examples of heating systems are given for all methods. The first signal-based fault detection method uses the factor matrices of a data tensor directly, the second calculates expected values from the decomposed tensor and compares these with measured values to generate the residuals. The third fault detection method is based on multi-linear models represented by parameter tensors with elements computed by subspace parameter identification algorithms and data for different but structured operating regimes. In case of missing data or model parameters in tensor representation, an approximation method based on a special CP tensor decomposition algorithm for incomplete tensors is proposed, called the decompose-and-unfold method. As long as all relevant dynamics has been recorded, this method approximates – also from incomplete data – models for all operating regimes, which can be used for residual generation and fault detection, e.g. by parity equations.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kolda, T.G., Bader, B.W.: Tensor decompositions and applications. SIAM Rev. 51, 455–500 (2009)
Rehault, N., Lichtenberg, G., Schmidt, F., Harmsen, A.: Modellbasierte Qualitätssicherung des energetischen Gebäudebetriebs (ModQS). Technical report, Abschlussbericht (2013)
Katipamula, S., Brambley, M.: Methods for fault detection, diagnostics, and prognostics for building systems - a review, Part I. HVAC&R Res. 11, 3–25 (2005)
Isermann, R., Balle, P.: Trends in the application of model-based fault detection and diagnosis of technical processes. Control. Eng. Pract. 5, 709–719 (1997)
Ding, S.X.: Model-Based Fault Diagnosis Techniques. Springer, Heidelberg (2008)
Venkatasubramanian, V., Rengaswamy, R., Kavuri, S.N., Yin, K.: A review of process fault detection and diagnosis: Part III: process history based methods. Comput. Chem. Eng. 27, 327–346 (2003)
Lichtenberg, G.: Modellbasierter Reglerentwurf komplexer Gebäudeautomationssysteme. In: OBSERVE Workshop - Nichtwohngebäude energieeffizient betreiben. (2017)
Lunze, J.: Automatisierungstechnik: Methoden für die Überwachung und Steuerung kontinuierlicher und ereignisdiskreter Systeme. Oldenbourg Verlag (2012)
Jagpal, R.: EBC Annex 34 - computer aided evaluation of HVAC system performance - technical synthesis report: computer aided evaluation of HVAC system performance (2006)
Pangalos, G.: Model-based controller design methods for heating systems. Dissertation, Hamburg University of Technology (2015)
Lichtenberg, G.: Hybrid tensor systems. Habilitation, Hamburg University of Technology (2011)
Pangalos, G., Eichler, A., Lichtenberg, G.: Hybrid multilinear modeling and applications. In: Obaidat, M., Koziel, S., Kacprzyk, J., Leifsson, L., Ören, T. (eds.) Simulation and Modeling Methodologies, Technologies and Applications, pp. 71–85. Springer, Cham (2015)
Liberzon, D.: Switching in Systems and Control. Systems & Control: Foundations & Applications. Birkhäuser, Boston (2003)
Sewe, E., Pangalos, G., Lichtenberg, G.: Fault detection for heating systems using tensor decompositions of multi-linear models. In: 7th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, Madrid (2017)
Van Overschee, P., De Moor, B.: Subspace Identification for Linear Systems: Theory - Implementation - Applications. Springer, Boston (2012)
Mulders, A.V., Schoukens, J., Volckaert, M., Diehl, M.: Two nonlinear optimization methods for black box identification compared. IFAC Proc. Vol. 42, 1086–1091 (2009)
Paduart, J., Lauwers, L., Swevers, J., Smolders, K., Schoukens, J., Pintelon, R.: Identification of nonlinear systems using polynomial nonlinear state space models. Automatica 46, 647–656 (2010)
Cichocki, A., Zdunek, R., Phan, A., Amari, S.: Nonnegative Matrix and Tensor Factorizations. Wiley, Chichester (2009)
Müller, T., Kruppa, K., Lichtenberg, G., Réhault, N.: Fault detection with qualitative models reduced by tensor decomposition methods. IFAC-PapersOnLine 48, 416–421 (2015)
Kiers, H.A.: Towards a standardized notation and terminology in multiway analysis. J. Chemom. 14, 105–122 (2000)
Cichocki, A., Mandic, D., De Lathauwer, L., Zhou, G., Zhao, Q., Caiafa, C., Phan, H.A.: Tensor decompositions for signal processing applications: from two-way to multiway component analysis. IEEE Signal Process. Mag. 32, 145–163 (2015)
Vervliet, N., Debals, O., Sorber, L., Lathauwer, L.D.: Breaking the curse of dimensionality using decompositions of incomplete tensors: tensor-based scientific computing in big data analysis. IEEE Signal Process. Mag. 31, 71–79 (2014)
Vervliet, N., Debals, O., Sorber, L., Van Barel, M., De Lathauwer, L.: Tensorlab user guide (2016)
Vervliet, N., Debals, O., Sorber, L., Van Barel, M., De Lathauwer, L.: Tensorlab 3.0 (2016). www.tensorlab.net
Murray-Smith, R., Johansen, T.A.: Multiple Model Approaches to Modelling and Control. Taylor and Francis, London (1997)
Ljung, L.: System identification toolbox: user’s guide (2016)
Fanaee-T, H., Gama, J.: Tensor-based anomaly detection: an interdisciplinary survey. Knowl. Based Syst. 98, 130–147 (2016)
Gertler, J.: Analytical redundancy methods in fault detection and isolation. In: Preprints of IFAC/IMACS Symposium on Fault Detection, Supervision and Safety for Technical Processes, SAFEPROCESS 1991, pp. 9–21 (1991)
Isermann, R.: Fault-Diagnosis Systems: An Introduction from Fault Detection to Fault Tolerance. Springer, Heidelberg (2006)
Sewe, E., Harmsen, A., Pangalos, G., Lichtenberg, G.: Umsetzung eines neuen Konzepts zur Mehrkesselregelung mit Durchflusssensoren. HLH Lüftung/Klima - Heizung/Sanitär - Gebäudetechnik 1, 37–42 (2012)
Pangalos, G., Lichtenberg, G.: Approach to boolean controller design by algebraic relaxation for heating systems. IFAC Proc. Vol. 45, 210–215 (2012)
Acknowledgements
This work was partly supported by the project OBSERVE of the Federal Ministry for Economic Affairs and Energy, Germany (Grant-No.: 03ET1225C) and partly supported by the Free and Hanseatic City of Hamburg (Hamburg City Parliament publication 20/11568). Most of the work of the first author was done during his time at PLENUM.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Sewe, E., Pangalos, G., Lichtenberg, G. (2019). Approaches to Fault Detection for Heating Systems Using CP Tensor Decompositions. In: Obaidat, M., Ören, T., Rango, F. (eds) Simulation and Modeling Methodologies, Technologies and Applications . SIMULTECH 2017. Advances in Intelligent Systems and Computing, vol 873. Springer, Cham. https://doi.org/10.1007/978-3-030-01470-4_8
Download citation
DOI: https://doi.org/10.1007/978-3-030-01470-4_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-01469-8
Online ISBN: 978-3-030-01470-4
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)