Abstract
In this chapter a multiple criteria method (MCM) is presented and tested for finite-element-model updating using a simple beam with holes and an irregular H-shaped structure. The MCM minimizes the Euclidean norm of the error matrix that combines the modal property data with the frequency-response function data. The results given by the MCM are compared with the results from a frequency-response function method (FRFM), and those obtained from the modal property method (MPM). The three methods were compared based on their ability to reproduce the measured parameters. It was observed, on average, that the MCM gives the best results.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Allemang RJ, Brown DL (1982) A Correlation Coefficient for Modal Vector Analysis. In: Proc of the 1st Int Modal Analysis Conf:01–18
Arora V, Singh SP, Kundra TK (2009) Finite Element Model Updating with Damping Identification. J of Sound and Vib 324:1111–1123
Asma F, Bouazzouni A (2005) Finite Element Model Updating Using FRF Measurements. Shock and Vib 12:377–388
Bayraktar A, Altuniúik AC, Sevim B, Türker T (2009) Finite Element Model Updating of Kömürhan Highway Bridge. Tech J of Turkish Chamber of Civil Eng 20:4675-700 Finite-element-model Updating Using a Multicriteria Method
Burden RL, Faires JD (1993) Numerical Analysis.PWS Publishing, Massachusetts
Camillacci R, Gabriele S (2005) Mechanical Identification and Model Validation for Sheartype Frames. Mech Syst and Signal Process 19:597–614
Christodoulou K, Ntotsios E, Papadimitriou C, Panetsos P (2008) Structural Model Updating and Prediction Variability Using Pareto Optimal Models. Comput Methods in Appl Mech and Eng 198:138–149
D'Ambrogio W, Fregolent A (1998) New Figures of Merit for Non-modal Test-analysis Correlation. In: Proc of the 23rd Intl Conf on Noise and Vib Eng, ISMA:393–400
D'Ambrogio W, Zobel PB (1990) Damage Detection in Truss Structures Using a Direct Updating Technique. ISMA19 Tools for Noise and Vib Analysis II
Das A, Dennis JE (1998) Normal-Boundary Intersection: A New Method for Generating the Pareto Surface in Nonlinear Multicriteria Optimization Problems. SIAM J on Optim 8:631–657
Dascotte E, Strobbe J (1999) Updating Finite Element Model Using FRF Correlation Functions. In: Proc of the Intl Modal Analysis Conf
De Castro HF, Cavalca KL, De Camargo LWF (2008) Multi-objective Genetic Algorithm Application in Unbalance Identification for Rotating Machinery. In: Proc of the 9th Intl Conf on Vib in Rotating Machin 2:885–897
Deb K (2002) Multi-Objective Optimization Using Evolutionary Algorithms. Wiley, New York
El-Borgi S, Neifar M, Cherif F, Choura S, Smaoui H (2008) Modal Identification, Model Updating and Nonlinear Analysis of a Reinforced Concrete Bridge. J of Vib and Contr 14:511–530
Esfandiari A, Bakhtiari-Nejad F, Rahai A, Sanayei M (2009) Structural Model Updating Using Frequency Response Function and Quasi-linear Sensitivity Equation. J of Sound and Vib 326:557–573
Ewins DJ (1986) Modal Testing: Theory and Practice. Research Studies Press, Letchworth
Friswell MI, Mottershead JE (1995) Finite Element Model Updating in Structural Dynamics. Kluwer Academic Publishers Group, Norwell
Gabriele S, Valente C, Brancaleoni F (2004) Interval Analysis for Updating Fern Parameters Using Uncertain Experimental Data. In: Proc of the Intl Conf on Noise and Vib Eng, ISMA:3065–3077
Gentile C (2006) Modal and Structural Identification of a R.C. Arch Bridge. Struct Eng and Mech 22:53–70
Gentile C, Gallino N (2008) Ambient Vibration Testing and Structural Evaluation of an Historic Suspension Footbridge. Adv in Eng Softw 39:356–366
Hemez FM, Doebling SW (1999) Test-analysis Correlation and Finite Element Model Updating for Nonlinear, Transient Dynamics. In: Proc of the Intl Modal Analysis Conf – IMAC:1501–1510
Iglesias AM (2000) Investigating Various Modal Analysis Extraction Techniques to Estimate Damping Ratio. Master of Sci Thesis, Virginia State Univ and Polytech Inst
Jung H, Park Y (2005) Model Updating Using the Closed-loop Natural Frequency. J of Guid, Contr, and Dyn 28:20–29
Kerschen G, Golinval JC (2004) A Two-step Methodology for the Generation of Accurate Finite Element Models of Nonlinear Mechanical Systems. Am Soc of Mech Eng, Des Eng Div (Publ) DE 117:313–320
Kharrazi MHK, Ventura CE, Brincker R, Dascotte E (2002) A Study on Damage Detection Using Output-only Modal Data. In: Proc of SPIE - The Intl Soc for Optical Eng 4753 II:1199–1205
Kwon KS, Rong-Ming L (2005) Robust Finite Element Model Updating Using Taguchi Method. J of Sound and Vib 280:77–99
Lin RM, Zhu J (2007) Finite Element Model Updating Using Vibration Test Data Under Base Excitation. J of Sound and Vib 303:596–613
Link M, Weiland M (2008) Damage Identification by Computational Model Updating. In: Proc of the 9th Biennial Conf on Eng Syst Des and Anal 2:683–693
Link M, Weiland M (2009) Damage Identification by Multi-model Updating in the Modal and in the Time Domain. Mech Syst and Signal Process 23:1734–1746
Lu Y, Tu Z (2004) A Two-level Neural Network Approach for Dynamic FE Model Updating Including Damping. J of Sound and Vib 275:931–952
Marwala T (1997) A Multiple Criteria Updating Method for Damage Detection on Structures. Master’s Thesis, University of Pretoria
Marwala T (2002) Finite Element Updating Using Wavelet Data and Genetic Algorithm. J of Aircr 39:709–711
Marwala T (2005) Finite Element Model Updating Using Particle Swarm Optimization. Intl J of Eng Simul 6:25–30
Marwala T (2009) Computational Intelligence for Missing Data Imputation, Estimation and Management: Knowledge Optimization Techniques. IGI Global, New York
Marwala T, Heyns PS (1998) Multiple Criteria Method for Determining Structural Damage. AIAA J 36:1494–501
Marwala T, Sibisi S (2005) Finite Element Model Updating Using Bayesian Framework and Modal Properties. J of Aircr 42:275–278
Meirovitch L (2000) Fundamentals of Vibrations. McGraw-Hill Companies, Singapore
Mthembu L, Marwala T, Friswell MI, Adhikari S (Accepted) Finite Element Model Selection Using Particle Swarm Optimization. 2010 Intl Modal Analysis Conf
Nobari AS, Farjoo MA (2004) Comparison Between Dedicated Model Updating Methods and Hybrid Method. J of Aircr 41:999–1004
Papadimitriou C, Ntotsios E (2008) Optimization Algorithms for System Integration. In: Proc of the 3rd Intl Conf on Smart Mater, Struct and Syst:514–523
Pascual R, Golinval JC, Berthillier M, Despres T (1998) Updating Industrial Models Under a General Optimization Environment. In: Proc of the Intl Modal Analysis Conf – IMAC, 2:1326–1332
Peeters B, De Roeck G (2001) Stochastic System Identification for Operational Modal Analysis: A Review. J of Dyn Syst, Meas and Control 123:659–668
Perera R, Ruiz A (2008) Damage Detection in Large Scale Structures Using a Two Stage Procedure. In: Proc of the 4th European Workshop on Struct Health Monit:1279–1286
Ren Y, Beards CF (1995) Identification of Joint Properties of a Structure Using FRF Data. J of Sound and Vib 186:567–587
Sadr MH, Astaraki S, Salehi S (2007) Improving the Neural Network Method for Finite Element Model Updating Using Homogenous Distribution of Design Points. Arch of Appl Mech 77:795–807
Sawaragi Y, Nakayama H, Tanino T (1985) Theory of Multiobjective Optimization. Academic Press Inc, Orlando
Schlune H, Plos M, Gylltoft K (2009) Improved Bridge Evaluation Through Finite Element Model Updating Using Static and Dynamic Measurements. Eng Struct 31:1477–1485
Steuer RE (1986) Multiple Criteria Optimization: Theory, Computations, and Applications. John Wiley & Sons, New York
Tong ZP, Zhang Y, Shen RY, Hua HX (2005) Submarine Finite Element Model Updating Method Based on Frequency Response Functions of Vibration. J of Shanghai Jiaotong Univ 39:1847–1850
Touat N, Pyrz M, Rechak S (2007) Accelerated Random Search Method for Dynamic FE Model Updating. Eng Comp 24:450–472
Unger JF, Teughels A, De Roeck G (2006) System Identification and Damage Detection of a Prestressed Concrete Beam. J of Struct Eng 132:1691–1698 Finite-element-model Updating Using a Multicriteria Method
Wang C, Li Z, Yin A (2009) Multi-objective Concurrent Approaching of Simulating for Civil Infrastructure. J of Southeast Univ (Natl Sci Ed) 39:78–84
Yuen KV, Katafygiotis LS (2002) Bayesian Modal Updating Using Complete Input and Incomplete Response Noisy Measurements. J of Eng Mech 128:340–350
Ziaei-Rad S (2005) Finite Element Model Updating of Rotating Structures Using Different Optimisation Techniques. Iranian J of Sci and Technol, Trans B: Eng 29:569–585
Rights and permissions
Copyright information
© 2010 Springer-Verlag London Limited
About this chapter
Cite this chapter
(2010). Finite-element-model Updating Using a Multi-criteria Method. In: Finite-element-model Updating Using Computional Intelligence Techniques. Springer, London. https://doi.org/10.1007/978-1-84996-323-7_8
Download citation
DOI: https://doi.org/10.1007/978-1-84996-323-7_8
Publisher Name: Springer, London
Print ISBN: 978-1-84996-322-0
Online ISBN: 978-1-84996-323-7
eBook Packages: EngineeringEngineering (R0)