Abstract
This chapter introduces finite-element-model updating. Direct and iterative updating procedures are explained. Some basic features on finite-element modeling are elucidated. Essential elements on vibration testing and analysis are explained and these include the domains in which data can be represented. These domains are in the modal, frequency and time–frequency spaces. Finite-element-model updating techniques are then reviewed and these can be broadly categorized into: matrix update methods, sensitivity-based techniques, iterative optimization procedures, Bayesian methods and computational intelligence techniques. Computational intelligence technques, which are the subject of this book, are then reviewed in detail.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
ABAQUS: (1994) ABAQUS Users Manual (Ver 5.4). Hibbitt, Karlsson and Sorensen, Inc, Pawtucket, Rhode Island
Allemang RJ, Brown DL (1982) A Correlation Coefficient for Modal Vector Analysis. In: Proc of the 1st Intl Modal Anal Conf:01–18
Alvin KF (1996) Finite Element Model Updating via Bayesian Estimation and Minimisation of Dynamic Residuals. In: Proc of the 14th Intl Modal Anal Conf:428–431
Araújo dos Santos JV, Lopes HMR, Vaz M, Mota Soares CM, Mota Soares CA, de Freitas MJM (2006) Damage Localization in Laminated Composite Plates Using Mode Shapes Measured by Pulsed TV Holography. Compos Struct 76:272–281
Arora V, Singh SP, Kundra TK (2009) Finite Element Model Updating with Damping Identification (2009) J of Sound and Vib 324:1111–1123
Babuska I, Banerjee U, Osborn JE (2004) Generalized Finite Element Methods: Main Ideas, Results, and Perspective. Intl J of Comput Methods 1:67–103
Bakir PG, Reynders E, De Roeck G (2007) Sensitivity-based Finite Element Model Updating Using Constrained Optimization with a Trust Region Algorithm. J of Sound and Vib 305:211–225
Baran NM (1988) Finite Element Analysis on Microcomputers. New York: McGraw-Hill Book Company
Baruch M (1978) Optimisation Procedure to Correct Stiffness and Flexibility Matrices Using Vibration Data. Am Inst of Aeronaut and Astronaut J 16:1208–1210
Baruch M, Bar Itzhack IY (1978) Optimum Weighted Orthogonalization of Measured Modes. Am Inst of Aeronaut and Astronaut J 20:1623–1626
Bayraktar A, Altunişik AC, Sevim B, Türker T (2009) Finite Element Model Updating of Kömürhan Highway Bridge [Kömürhan Köprüsünün Sonlu Eleman Model Iyileştirilmesi]. Teknik Dergi / Tech J of Turk Chamb of Civ Eng 20:4675–4700
Ben-Haim Y, Prells U (1993) Selective Sensitivity in the Frequency Domain, Part I: Theory. Mech Syst and Signal Process 7:461–475
Berman A, Nagy EJ (1983) Improvement of Large Analytical Model Using Test Data. Am Inst of Aeronaut and Astronaut J 21:1168–1173
Boggs PT, Tolle JW (1995) Sequential Quadratic Programming. Acta Numerica 4:01–51
Bürmen A, Puhan J, Tuma T (2006) Grid Restrained Nelder-Mead Algorithm. Comput Optim Appl 34:359–375
Carvalho J, Datta BN, Gupta A, Lagadapati M (2007) A Direct Method for Model Updating with Incomplete Measured Data and Without Spurious Modes. Mech Syst and Signal Process 21:2715–2731
Cawley P, Adams RD (1979) The Location of Defects from Measurements of Natural Frequencies. J of Strain Anal 14:49–57
Chandrupatla TR, Belegudu AD (2002) Introduction to Finite Elements in Engineering. Prentice Hall, New Jersey
Chen JC, Garba JA (1980) Analytical Model Improvement Using Modal Test Results. Am Inst of Aeronaut and Astronaut J 18:684–690
Chen KN (2006) Model Updating and Optimum Designs for V-shaped Atomic Force Microscope Probes. Eng Optim 38:755–770
Chen S, Fu C, Isam S (2009) Finite Element Analysis of Jointed Rock Masses Reinforced by Fully-grouted Bolts and Shotcrete Lining. Intl J of Rock Mech and Min Sci 46:19–30
Courant R, Robbins H (1941) What is Mathematics? Oxford University Press, New York
D’Ambrogio W, Zobel PB (1994) Damage Detection in Truss Structures Using a Direct Updating Technique. In: Proc of the 19th Intl Seminar for Modal Anal:657–667
Dunn SA (1998) The Use of Genetic Algorithms and Stochastic Hill-climbing in Dynamic Finite-element Model Identification. Comput and Struct 66:489–497
Easley SK, Pal S, Tomaszewski PR, Petrella AJ, Rullkoetter PJ, Laz PJ (2007) Finite Element-based Probabilistic Analysis Tool for Orthopaedic Applications. Comput Methods and Programs in Biomed 85:32–40
Esfandiari A, Bakhtiari-Nejad F, Rahai A, Sanayei M (2009) Structural Model Updating Using Frequency Response Function and Quasi-linear Sensitivity Equation (2009) J of Sound and Vib 326:557–573
Ewins DJ (1995) Modal Testing: Theory and Practice. Research Studies Press, Letchworth
Fang S, Perera R (2009) Power Mode Shapes for Early Damage Detection in Linear Structures. J of Sound and Vib 324:40–56
Farrar CR, Baker WE, Bell TM, Cone KM, Darling TW, Duffey TA, Eklund A, Migliori A (1994) Dynamic Characteristics and Damage Detection in the I-40 Bridge over the Rio Grande. Los Alamos National Laboratory Report LA-12767-MS
Faverjon B, Sinou JJ (2009) Identification of an Open Crack in a Beam Using a Posteriori Error Estimator of the Frequency Response Functions with Noisy Measurements. Eur J of Mech – A / Solids 28:75–85
Fei Q, Li A, Miao C (2006) Dynamic Finite Element Model Updating Using Meta-model and Genetic Algorithm. J of Southeast Univ (Engl Ed) 22:213–217
Feng FZ, Kim YH, Yang BS (2006) Applications of Hybrid Optimization Techniques for Model Updating of Rotor Shafts. Struct and Multidiscip Optim 32:65–75
Fox RL, Kapoor MP (1968) Rates of Change of Eigenvalues and Eigenvectors. Am Inst of Aeronaut and Astronaut J 6:2426–2429
Friswell MI, Mottershead JE (1995) Finite Element Model Updating in Structural Dynamics. Kluwer Academic Publishers Group, Norwell
Friswell MI, Penny JET, Wilson DAL (1994) Using Vibration Data and Statistical Measures to Locate Damage in Structures. Modal Anal: The Intl J of Anal and Exp Modal Anal 9:239–254
Guyan RJ (1965) Reduction of Stiffness and Mass Matrices. Am Inst of Aeronaut and Astronaut J 3:380
Gysin H (1990) Comparison of Expansion Methods for FE Model Localization. In: Proc of the 8th Intl Modal Anal Conf:195–204
Hastings JK, Juds MA, Brauer JR (1985) Accuracy and Economy of Finite Element Magnetic Analysis. 33rd Annu Natl Relay Conf:45–50
Haug EF, Choi KK (1984) Structural Design Sensitivity with Generalized Global Stiffness and Mass Matrices. Am Inst of Aeronaut and Astronaut J 22:1299–1303
He HX, Yan WM, Wang Z (2008) Stepwise Model Updating Method Based on Substructures and GA-ANN. Eng Mech 25:99–105
Hemez FM (1993) Theoretical and Experimental Correlation between Finite Element Models and Modal Tests in the Context of Large Flexible Structures. PhD Dissertation, University of Colorado, Boulder
Hemez FM, Doebling SW (1999) Validation of Bayesian Finite Element Model Updating for Linear Dynamics. In: Proc of the Intl Modal Anal Conf - IMAC 2: 1545–1555
Hlilou A, Ben Naceur I, Saï K, Gérard C, Forest S, Cailletaud G (2009) Generalization of the Polycrystalline β-model: Finite Element Assessment and Application to Softening Material Behavior. Comput Mater Sci 45:1104–1112
Hrennikoff A (1941) Solution of Problems of Elasticity by the Frame-Work Method. ASME J Appl Mech 8:A619–A715
Huang M, Zhu H (2008) Finite Element Model Updating of Bridge Structures Based on Sensitivity Analysis and Optimization Algorithm. Wuhan Univ J of Nat Sci 13:87–92
Imregun M, Ewins DJ (1993) An Investigation into Mode Shape Expansion Techniques. In: Proc of the 11th Intl Modal Anal Conf:168–175
Imregun M, Visser WJ, Ewins DJ (1995) Finite Element Model Updating Using Frequency Response Function Data-I. Theory and Initial Investigation. Mech Syst and Signal Process 9:187–202
Irons B, Shrive N (1983) Finite Element Primer. John Wiley
Jaishi B, Kim HJ, Kim MK, Ren WX, Lee SH (2007) Finite Element Model Updating of Concrete-filled Steel Tubular Arch Bridge Under Operational Condition Using Modal Flexibility. Mech Syst and Signal Process 21:2406–2426
Jaishi B, Ren WX (2007) Finite Element Model Updating Based on Eigenvalue and Strain Energy Residuals Using Multiobjective Optimization Technique. Mech Syst and Signal Process 21:2295–2317
Janter T, Sas P (1990) Uniqueness Aspects of Model-updating Procedure. Am Inst of Aeronaut and Astronaut J 28:538–543
Jung DS, Kim CY (2009) FE Model Updating Based on Hybrid Genetic Algorithm and its Verification on Numerical Bridge Model. Struct Eng and Mech 32:667–683
Kabe AM (1985) Stiffness Matrix Adjustment Using Mode Data. Am Inst of Aeronaut and Astronaut J 23:1431–1436
Kamrani B, Berbyuk V, Wäppling D, Stickelmann U, Feng X (2009) Optimal Robot Placement Using Response Surface Method. Intl J of Adv Manufact Technol 44:201–210
Kennedy JE, Eberhart RC (1995) Particle Swarm Optimization. In: Proc of the IEEE Intl Conf on Neural Netw:942–1948
Kim GH, Park YS (2008) An Automated Parameter Selection Procedure for Finite-element Model Updating and its Applications. J of Sound and Vib 309:778–793
Kim JH, Jeon HS, Lee SW (1992) Application of Modal Assurance Criteria for Detecting and Locating Structural Faults. In: Proc of the 10th Intl Modal Anal Conf:536–540
Kirkpatrick S, Gelatt CD, Vecchi MP (1983) Optimization by Simulated Annealing. Sci 220:671–680
Kozak MT, Öztürk M, Özgüven HN (2009) A Method in Model Updating Using Miscorrelation Index sensitivity. Mech Syst and Signal Process 23:1747–1758
Larson CB, Zimmerman DC (1993) Structural Model Refinement Using a Genetic Algorithm Approach. In: Proc of the 11th Intl Modal Anal Conf:1095–1101
Levin RI, Lieven NAJ (1998) Dynamic Finite Element Updating Using Neural Networks. J of Sound and Vib 210:593–608
Li H, Liu F, Hu SLJ (2008) Employing Incomplete Complex Modes for Model Updating and Damage Detection of Damped Structures. Sci in Chin, Ser E: Technol Sci 51:2254–2268
Li YF, Yu HB (2009) Hybrid Search Method for Efficiency Optimization Control of Induction Motor Drives. Elect Mach and Control 13:337–341
Li YQ, Du YL (2009) Dynamic Finite Element Model Updating of Stay-cable Based on the Most Sensitive Design Variable. J of Vib and Shock 28:141–143
Lieven NAJ, Ewins DJ (1988) Spatial Correlation of Mode Shapes, the Co-ordinate Modal Assurance Criterion. In: Proc of the 6th Intl Modal Anal Conf:690–695
Lin RM, Lim MK, Du H (1995) Improved Inverse Eigensensitivity Method for Structural Analytical Model Updating. J of Vib and Acoust 117:192–198
Lindholm BE, West RL (1995) Updating Finite Element Models with Experimental Dynamic Response Data using Bayesian Parameter Estimation. 1995 Collect of Tech Pap - AIAA/ASME/ASCE/AHS/ASC Struct, Struct Dyn and Mater Conf 2:794–802
Liu X, Lieven NAJ, Escamilla-Ambrosio PJ (2009) Frequency Response Function Shapebased Methods for Structural Damage Localization. Mech Syst and Signal Process 23:1243–1259
Liu Y, Duan Z, Liu H (2006) Updating Finite Element Model of Structures with Semi-rigid Joints and Boundary. In: Proc of SPIE - The Intl Soc for Opt Eng 6174 II: Art No 61743L
Liu Y, Duan Z, Liu H (2009) Updating of Finite Element Model in Considering Mode Errors with Fuzzy Theory. Key Eng Mater, 413–414:785–792
Lyon R (1995) Structural Diagnostics Using Vibration Transfer Functions. Sound and Vib 29:28–31
Maia NMM, Silva JMM (1997) Theoretical and Experimental Modal Analysis. Research Studies Press, Letchworth.
Mares C, Mottershead JE, Friswell MI (2006) Stochastic Model Updating: Part 1-Theory and Simulated Example. Mech Syst and Signal Process 20:1674–1695
Mares C, Surace C (1996) An Application of Genetic Algorithms to Identify Damage in Elastic Structures. J of Sound and Vib 195:195–215
Marwala T (2001) Fault Identification Using Neural Networks and Vibration Data. University of Cambridge. Unpublished Doctoral Thesis
Marwala T (2009) Computational Intelligence for Missing Data Imputation, Estimation and Management: Knowledge Optimization Techniques. Information Science IGI Global Publications, New York: Reference Imprint
Marwala T, Sibisi S (2005) Finite Element Updating Using Bayesian Framework and Modal Properties. J of Aircr 42:275–278
McGowan PE, Smith SW, Javeed M (1990) Experiments for Locating Damage Members in a Truss Structure. In: Proc of the 2nd USAF/NASA Workshop on Syst Identif and Health Monit of Precis Space Struct:571–615
Messina A, Jones IA, Williams EJ (1996) Damage Detection and Localization Using Natural Frequency Changes. In: Proc of the 1st Intl Conf on Identif in Eng Syst:67–76
Messina A, Williams EJ, Contursi T (1998) Structural Damage Detection by a Sensitivity and Statistical-based Method. J of Sound and Vib 216:791–808
Miao HY, Larose S, Perron C, Lévesque M (2009) On the Potential Applications of a 3D Random Finite Element Model for the Simulation of Shot Peening. Adv in Eng Softw 40:1023–1038
Migliori A, Bell TM, Dixon RD, Strong R (1983) Resonant Ultrasound Nondestructive Inspection. Los Alamos National Laboratory Report LS-UR-93-225
Mitchell M (1998) An Introduction to Genetic Algorithms (Complex Adaptive Systems), The MIT Press, Cambridge
Mottershead JE, Friswell MI (1993) Model Updating in Structural Dynamics: A Survey. J of Sound and Vib 167:347–375
Ni YQ, Zhou XT, Ko JM (2006) Experimental Investigation of Seismic Damage Identification Using PCA-compressed Frequency Response Functions and Neural Networks. J of Sound and Vib 290:242–263
Norris MA, Meirovitch L (1989) On the Problem of Modelling for Parameter Identification in Distributed Structures. Intl J for Numer Methods in Eng 28: 2451–2463
O’Callahan JC (1989) A Procedure for Improved Reduced System (IRS) Model. In: Proc of the 7th Intl Modal Anal Conf:17–21
O’Callahan JC, Avitabile P, Riemer R (1989) System Equivalent Reduction Expansion Process. In: Proc of the 7th Intl Modal Anal Conf:17–21
Ojalvo IU, Pilon D (1988) Diagnosis for Geometrically Locating Structural Mathematical Model Errors from Modal Test Data. In: Proc of the 29th AIAA / ASME / ASCE / AHS / ASC Struct, Struct Dynam, and Mater Conf:1174–1186
Pavic A, Miskovic Z, Reynolds P (2007) Modal Testing and Finite-element Model Updating of a Lively Open-plan Composite Building Floor. J of Struct Eng 133:550–558
Paz M (1984) Dynamic Condensation. Am Inst of Aeronaut and Astronaut J 22:724–727
Pepper W, Wang X (2007) Application of an H-adaptive Finite Element Model for Wind Energy Assessment in Nevada Renewable Energy 32:1705–1722
Qiao P, Cao M (2008) Waveform Fractal Dimension for Mode Shape-based Damage Identification of Beam-type Structures. Intl J of Solids and Struct 45:5946–5961
Qiao P, Lu K, Lestari W, Wang J (2007) Curvature Mode Shape-based Damage Detection in Composite Laminated Plates. Compos Struct 80:409–428
Rahman MM, Ariffin AK, Nor SSM (2009) Development of a Finite Element Model of Metal Powder Compaction Process at Elevated Temperature. Appl Math Model 33:4031–4048
Salawu OS (1995) Non-destructive Assessment of Structures Using Integrity Index Method Applied to a Concrete Highway Bridge. Insight 37:875–878
Sancho-Gómez JL, GarcÃa-Laencina PJ, Figueiras-Vidal AR (2009) Combining Missing Data Imputation and Pattern Classification in a Multi-layer Perceptron. Intelli Autom and Soft Comput 15:539–553
Sazonov E, Klinkhachorn P (2005) Optimal Spatial Sampling Interval for Damage Detection by Curvature or Strain Energy Mode Shapes. J of Sound and Vib 285:783–801
Schlune H, Plos M, Gylltoft K (2009) Improved Bridge Evaluation Through Finite Element Model Updating Using Static and Dynamic Measurements. Eng Struct 31:1477–1485
Schrade D, Mueller R, Xu BX, Gross D (2007) Domain Evolution in Ferroelectric Materials: A Continuum Phase Field Model and Finite Element Implementation. Comput Methods in Appl Mech and Eng 196:4365–4374
Schultz MJ, Pai PF, Abdelnaser AS (1996) Frequency Response Function Assignment Technique for Structural Damage Identification. In: Proc of the 14th Intl Modal Anal Conf:105–111
Schwarz B, Richardson M, Formenti DL (2007) FEA Model Updating Using SDM Sound and Vib 41:18–23
Sestieri A, D’Ambrogio W (1989) Why be Modal: How to Avoid the Use of Modes in the Modification of Vibrating Systems. In: Proc of the 7th Intl Modal Anal Conf:25–30
Shahverdi H, Mares C, Wang W, Greaves CH, Mottershead JE (2006) Finite Element Model Updating of Large Structures by the Clustering of Parameter Sensitivities. Appl Mech and Mater 5–6:85–92
Shone SP, Mace BR, Waters TP (2009) Locating Damage in Waveguides from the Phase of Point Frequency Response Measurements. Mech Syst and Signal Process 23:405–414
Soares MM, Vieira GE (2009) A New Multi-objective Optimization Method for Master Production Scheduling Problems Based on Genetic Algorithm. Intl J of Adv Manufact Technol 41:549–567
Solin P, Segeth K, Dolezel I (2004) Higher-Order Finite Element Methods. Boca Raton: Chapman & Hall / CRC Press
Steenackers G, Devriendt C, Guillaume P (2007) On the Use of Transmissibility Measurements for Finite Element Model Updating. J of Sound and Vib 303:707–722
Steenackers G, Guillaume P (2006) Finite Element Model Updating Taking into Account the Uncertainty on the Modal Parameters Estimates. J of Sound and Vib 296:919–934
Tan D, Qu W, Wang J (2009) The Finite Element Model Updating of Structure Based on Wavelet Packet Analysis and Support Vector Machines. J of Huazhong Univ of Sci and Technol (Nat Sci Ed) 37:104–107
Todorovska MI, Trifunac MD (2008) Earthquake Damage Detection in the Imperial County Services Building III: Analysis of Wave Travel Times via Impulse Response Functions. Soil Dyn and Earthq Eng 28:387–404
Tu Z, Lu Y (2008) FE Model Updating Using Artificial Boundary Conditions with Genetic Algorithms. Comput and Struct 86:714–727
Wang R, Shang D, Li L, Li C (2008) Fatigue Damage Model Based on the Natural Frequency Changes for Spot-welded Joints. Intl J of Fatigue 30:1047–1055
Wang W, Mottershead JE, Mares C (2009) Mode-shape Recognition and Finite Element Model Updating Using the Zernike Moment Descriptor. Mech Syst and Signal Process 23:2088–2112
West WM (1982) Single Point Random Modal Test Technology Application to Failure Detection. The Shock and Vib Bull 52:25–31
White C, Li HCH, Whittingham B, Herszberg I, Mouritz AP (2009) Damage Detection in Repairs Using Frequency Response Techniques. Compos Struct 87:175-181
White L, Deleersnijder E, Legat V (2008) A Three-dimensional Unstructured Mesh Finite Element Shallow-water Model, with Application to the Flows around an Island and in a Wind-driven, Elongated Basin. Ocean Model 22:26–47
Wong JM, Mackie K, Stojadinovic B (2006) Bayesian Updating of Bridge Fragility Curves Using Sensor Data. In: Proc of the 3rd Intl Conf on Bridge Maint, Saf and Manag:613–614
Wu JE, Dai H (2008) Regularized Lanczos Method for Model Updating. J of Vib and Shock 27:65–69
Yan GR, Duan ZD, Ou JP (2007) Application of Genetic Algorithm on Structural Finite Element Model Updating. Harbin J of Harbin Inst of Technol 39:181–186
Yang Z, Wang L, Li B, Liu J (2009) Objective Functions and Algorithms in Structural Dynamic Finite Element Model Updating. Chin J of Appl Mech 26:288–296
Yao CR, Li YD (2008) Updating of Cable-stayed Bridges Model Based on Static and Dynamic Test Data. J of the Chin Railw Soc 30:65–70
Yeung DS, Chan PPK, Ng WWY (2009) Radial Basis Function Network Learning Using Localized Generalization Error Bound. Inf Sci 179:3199–3217
Yuan XX, Mao D, Pandey MD (2009) A Bayesian Approach to Modeling and Predicting Pitting Flaws in Steam Generator Tubes. Reliab Eng and Syst Saf 94:1838–1847
Yuan Y, Dai H (2006) Updating Finite Element Analytical Models Using Incomplete Modal Data Measured. J of Vib and Shock 25:154–156
Yuan Y, Dai H (2009) The Direct Updating of Damping and Gyroscopic Matrices. J of Comput and Appl Math 231:255–261
Zapico JL, Gonzlez-Buelga A, Gonzlez MP, Alonso R (2008) Finite Element Model Updating of a Small Steel Frame Using Neural Networks. Smart Mater and Struct 17:Art No 045016
Zárate BA, Caicedo JM (2008) Finite Element Model Updating: Multiple Alternatives. Eng Struct 30:3724–3730
Zhang LZ, Huang Q (2008) Updating of Bridge Finite Element Model Based on Optimization Design Theory. J of Harbin Inst of Technol 40:246–249
Zhang QH, Teo EC (2008) Finite Element Application in Implant Research for Treatment of Lumbar Degenerative Disc Disease. Med Eng and Phys 30:1246–1256
Zheng YM, Sun HH, Zhao X, Chen W, Zhang RH, Shen XD (2009) Finite Element Model Updating of a Long-span Steel Skybridge. J of Vib Eng 22:105–110
Zhong S, Oyadiji SO (2008) Analytical Predictions of Natural Frequencies of Cracked Simply Supported Beams with a Stationary Roving Mass. J of Sound and Vib 311:328–352
Zhong S, Oyadiji SO, Ding K (2008) Response-only Method for Damage Detection of Beam-like Structures Using High Accuracy Frequencies with Auxiliary Mass Spatial Probing. J of Sound and Vib 311:1075–1099
Zienkiewicz OC (1986) The Finite Element Method. McGraw-Hill Companies, New York
Zimmerman DC, Kaouk M (1992) Eigenstructure Assignment Approach for Structural Damage Detection. Am Inst of Aeronaut and Astronaut J 30:1848–1855
Zimmerman DC, Kaouk M, Simmermacher T (1995) Structural Damage Using Frequency Response Functions. In: Proc of the 13th Intl Modal Anal Conf:179–184
Živanović S, Pavic A, Reynolds P (2007) Finite Element Modelling and Updating of a Lively Footbridge: The Complete Process. J of Sound and Vib 301:126–145
Zong ZH, Xia ZH (2008) Finite Element Model Updating Method of Bridge Combined Modal Flexibility and Static Displacement. Chin J of Highw and Transp 21:43–49
Rights and permissions
Copyright information
© 2010 Springer-Verlag London Limited
About this chapter
Cite this chapter
(2010). Introduction to Finite-element-model Updating. In: Finite-element-model Updating Using Computional Intelligence Techniques. Springer, London. https://doi.org/10.1007/978-1-84996-323-7_1
Download citation
DOI: https://doi.org/10.1007/978-1-84996-323-7_1
Publisher Name: Springer, London
Print ISBN: 978-1-84996-322-0
Online ISBN: 978-1-84996-323-7
eBook Packages: EngineeringEngineering (R0)