Abstract
Production systems are the facilities by which we produce most of the goods we are consuming in our daily lives. These goods ranges from electronics parts to cars and aircrafts. The production systems are in general complex systems and represent a challenge for the researchers from operations research and control communities. Their modeling and control are among the hardest problems we can have.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Aghezzaf Jamali MA, Ait-Kadi D (2007) An Integrated Production and Preventive maintenance Planning Model. Eur J of Oper Res 181: 679–685.
Akella R, Kumar PR (1986) Optimal Control of Production Rate in a Failure Prone Manufacturing System. IEEE Trans on Autom Control AC-31(2):1 06–126.
Algoet PH (1988) Flow balance equations for the steady-state distribution of a flexible manufacturing system. IEEE Trans on Autom Control 34(8): 917–921.
Bertsekas DP (1987) Dynamic Programming: Deterministic and Stochastic Models. Prentice Hall Inc.
Bielecki T, Kumar PR (1988) Optimality of zero-inventory policies for unreliable manufacturing systems. Oper Res 36(4): 532–541.
Boukas EK (1987) Commande optimale stochastique appliquée aux systèmes de production, Ph.D. Thesis, Ecole Polytechnique de Montréal, Université de Montréal.
Boukas EK (1993) Control of Systems with Controlled Jump Markov Disturbances. Control Theory and Adva Technol 9(2): 577–595.
Boukas EK (1995) Numerical Methods for HJB Equations of Optimization Problems for Piecewise Deterministic Systems. Optima Control Appl & Methods 16: 41–58.
Boukas EK (1998) Hedging point policy improvement. J of Optimi Theory and Appl 97(1).
Boukas EK (2006) Manufacturing Systems: LMI Approach. IEEE Trans on Autom Control 51(6): 1014–1018.
Boukas EK, Haurie A (1988) Optimality conditions for continuous time systems with controlled jump Markov disturbances: Application to production and maintenance scheduling. Proceeding INRIA 8th International Conference Springer Verlag on Analysis and Optimization of Systems, Antibes.
Boukas EK, Haurie A (1990) Manufacturing flow control and preventive maintenance: A stochastic control approach. IEEE Trans on Autom Control 35(9): 1024–1031.
Boukas EK, Kenne JP (1997) Maintenance and production control of manufacturing system with setups. Lect in Appl Math 33: 55–70.
Boukas EK, Liu ZK (2003) Modeling and Numerical Methods in Manufacturing Systems using Control Theory. In: Shanbhag DN, Rao CR (eds.) Handbook of Statistics 21: Stochastic Processes: Modeling and Simulation.
Boukas EK, Yang H (1996) Manufacturing Flow Control and Preventive Maintenance: A Stochastic Control Approach. IEEE Transaction on Automatic Control 41(6): 881-885.
Boukas EK, Zhu Q, Zhang Q (1994) Piecewise deterministic Markov process model for flexible manufacturing systems with preventive maintenance. J of Optim Theory and Appl 81(2): 258–275.
Boukas EK, Zhang Q, Yin G (1996) On robust design for a class of failure prone manufacturing system. In: Yin, Zhang (eds.) Recent advances in control and optimization of manufacturing systems. Lecture Notes in control and information sciences 214, Springer-Verlag, London.
Bremaud P, Malhamé RP, Massoulie L (1997) A manufacturing system with general failure process: stability and IPA of hedging control policies. IEEE Trans on Autom Control 42(2): 155–170.
Buzacott JA, Shanthikumar JG (1993) Stochastic Models of Manufacturing Systems. Prentice-Hall, Englewood Cliffs, NJ.
Caramanis M, Liberopoulos G (1992) Perturbation analysis for the design of flexible manufacturing system flow controllers. Oper Res 40: 1107–1125.
Connolly S, Dallery Y, Gershwin SB (1992) A real-time policy for performing setup changes in a manufacturing system. Proceeding of the 31st IEEE Conference on Decision and Control, Tucson, AZ.
Costa OLV (1989) Average impulse control of piecewise deterministic processes. IMA J of Math Control and Inf 6(4): 379–397.
Costa OLV (1991) Impulse control of piecewise-deterministic processes via linear programming. IEEE Trans on Autom Control 36(3): 371–375.
Costa OLV, Davis MHA (1989) Impulse control of piecewise-deterministic processes. Math of Control, Signals, and Syst 2(3): 187–206.
Dassios A, Embrechts P (1989) Martingales and insurance risk. Commun Stat Stoch Models 5(2): 181-217.
Davis MHA (1984) Piecewise deterministic Markov processes: A general class off nondiffusion stochastic models. J of Royal Stat Soc 46(3): 353–388.
Davis MHA (1986) Control of piecewise-deterministic processes via discrete-time dynamic programming. In: Helmes K, Christopeit, Kohlman (eds.) Stochastic Differential Systems. Springer-Verlag, pp 140–150.
Davis MHA (1993) Markov Modeling and Optimization. Chapman and Hall.
Davis MHA, Dempster MAH, Sethi SP, Vermes D (1987) Optimal capacity expansion under uncertainty. Adv in Appl Probab 19: 156–176.
Dempster MAH (1991) Optimal control of piecewise deterministic Markov processes. In: Applied Stochastic Analysis. Gordon and Breach, New York, pp 303–325.
Desrochers AA (1990) Modeling and Control of Automated Manufacturing Systems. IEEE Computer Society Press, Washington.
Duncan TE, Pasik-Duncan B, Zhang Q (1999) Adaptive control of stochastic manufacturing system with hidden Markovian demands and small noise. IEEE Trans on Autom Control 44(2): 427–431.
Fleming WH, Soner HM (1992) Controlled Markov Processes and Viscosity Solutions. Springer-Verlag, New York.
Fu K, Hsu VN, Lee CY (2006) Inventory and Production Decisions for an Assemble-to-Order System with Uncertain Demand and Limited Assembly Capacity. Oper Res 54(6): 1137–1150.
Gatarek D (1992) Optimality conditions for impulsive control of piecewise-deterministic processes. Math of Control, Signals, and Syst 5(2): 217–232.
Gershwin SB (1989) Hierarchical flow control: A framework for scheduling and planning discrete events in manufacturing systems. Proc of the IEEE, Special Issue on Discret Event Dyn Syst 77(1): 195–209.
Gershwin SB (1993) Manufacturing Systems Engineering. Prentice Hall, Englewood Cliffs.
Gershwin SB, Caramanis M, Murray P (1988) Simulation experience with a hierarchical scheduling policy for a simple manufacturing system. Proceeding of the 27th IEEE Conference on Decision and Control, Austin, TX, 1941–1849.
Gonzales R, Roffman E (1985) On the deterministic control problems: an approximation procedure for the optimal cost I. The stationary problem. SIAM Control and Optim 23(2): 242–266.
Haurie A, L'Ecuyer P (1986) Approximation and bounds in discrete event dynamic programming. IEEE Trans on Autom Control 31(3): 227–235.
Hu JQ, Caramanis M (1994) Dynamic set-up scheduling of flexible manufacturing systems: Design and stability of near optimal general round robin policies. In: Kumar PR, Varaiya P (eds.) Discrete Event Systems, IMA volumes in mathematics and applications series, Springer-Verlag.
Hu JQ, Xiang D (1994) Structural properties of optimal flow control for failure prone production system. IEEE Trans on Autom Control 39(3): 640–642.
Hu JQ, Vakili P, Yu GX (1994) Optimality of hedging point policies in the production control of failure prone manufacturing systems. IEEE Trans on Autom Control 39(9): 1875–1880.
Kimemia J, Gershwin SB (1983) An algorithm for computer control of a flexible manufacturing system. IIE Trans 15(4): 353–362.
Krasovskii NN, Lidskii EA (1961) Design of Controller in System with Random Attributes-Part 1. Automa Remote Control 22: 1021–1025.
Kushner HJ (1977) Probability Methods for Approximation in Stochastic Control and for Elliptic Equations. Academic Press, New York.
Kushner HJ, Dupuis PG (1992) Numerical Methods for Stochastic Control Problems in Continuous Time. Springer-Verlag, New York.
Lejeune MA, Ruszczynski A (2007) An Efficient Trajectory Methods for Probabilistic Production Inventory Distribution Problems. Oper Res 55(2): 378–394.
Lenhart MS, Liao YC (1988) Switching control of piecewise-deterministic processes. J of Optim Theory and Appl 59(1): 99–115.
Liberopoulos G, Caramanis M (1994) Production control of manufacturing system with production rate-dependent failure rates. IEEE Trans on Autom Control 39(4): 889–895.
Maimoun O, Khenelnitsky E, Kogan K (1998) Optimal flow control in manufacturing system: Production Planning and Scheduling. Kluwer Academic Publishers, Dordecht.
Marquez AC, Gupta JND, Heguedas AS (2007) Maintenance Policies for a Production System with Constrained Production Rate and Buffer Capacity. Int J of Prod Res 41(9): 1909–1926.
Menaldi JL (1989) Some estimates for finite difference approximations. SIAM J on Control and Optim 27: 579–607.
Olsder GJ, Suri R (1980) Time optimal of parts-routing in a manufacturing system with failure prone machines. Proc. 19th IEEE. Conference on Decision and Control Alburquerque, New Mexico, 722–727.
Panogiotidou S, Tagaras G (2007) Optimal Preventive Maintenance for Equipment with two Quality States and General Failure Time Distributions. Eur J of Oper Res 180: 329–353.
Rishel R (1975) Control of systems with jump Markov disturbances. IEEE Trans on Autom Control 20: 241–244.
Ross SM (1970) Applied Probability Methods with Optimization Applications. Holden-Day, San Francisco.
Sethi SP, Zhang Q (1994) Hierarchical Decision Making in Stochastic Manufacturing Systems. Birkhauser, Boston.
Sethi SP, Taksar MI, Zhang Q (1997) Optimal production planning in a stochastic manufacturing system with long-run run average cost. J of Optim Theory and Appl 92(1): 161–188.
Sharifnia A (1988) Production control of a manufacturing system with multiple machine states. IEEE Trans on Autom Control 33(7): 620–625.
Sharifnia A, Caramanis M, Gershwin SB (1991) Dynamic setup scheduling and flow control in manufacturing systems. Discret Event Dyn Syst: Theory and Appl 1: 149–175.
Soner HM (1986) Optimal control with state-space constraint II. SIAM J on Control and Optim 24(6): 1110–1122.
Sworder DD, Robinson VG (1974) Feedback regulators for jump parameter systems with state and control dependent transition rates. IEEE Trans on Autom Control 18: 355–359.
Tu FS, Song DP, Lou SXC (1993) Preventive hedging point control policy and its realization, Preprint of the XII World IFAC congress, July 18-23, Sydney, Australia, 5: 13–16.
Veatch MH, Caramanis MC (1999) Optimal average cost manufacturing flow controllers: convexity and differentiability. IEEE Trans on Autom Control 44(4): 779–783.
Viswanadham N, Narahari Y (1992) Performance modeling of automated manufacturing systems. Prentice Hall, Englewood Cliffs.
Wang H (2002) A Survey of Maintenance Policies of Deteriorating Systems. Eur J of Oper Res 139: 469–489.
Wonham WM (1971) Random differential equations in control theory. In: Bharucha-Reid AT (ed.) Probabilistic Methods in Applied Mathematics, Vol. 2. Academic, New York.
Yan H, Zhang Q (1997) A numerical method in optimal production and setup scheduling of stochastic manufacturing system. IEEE Trans on Autom Control 42(10):1452–1555.
Yang J, Qi X, Xia Y (2005) A Production Inventory System with Markovian Capacity and Outsourcing Option. Oper Res 53(2): 328–349.
Yin G, Zhang Q (1996) Recent Advances in Control and Optimization of Manufacturing System. Lecture notes in control and information sciences 214, Springer-Verlag, London.
Yin G, Zhang Q (1998) Continuous-Time Markov Chains and Applications: A Singular Perturbation Approach. Springer-Verlag.
Yu XZ, Song WZ (1999) Further properties of optimal hedging points in a class of manufacturing system. IEEE Trans on Autom Control 44(2): 379–382.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag London Limited
About this chapter
Cite this chapter
Boukas, EK. (2009). Models for Production and Maintenance Planning in Stochastic Manufacturing Systems. In: Ben-Daya, M., Duffuaa, S., Raouf, A., Knezevic, J., Ait-Kadi, D. (eds) Handbook of Maintenance Management and Engineering. Springer, London. https://doi.org/10.1007/978-1-84882-472-0_12
Download citation
DOI: https://doi.org/10.1007/978-1-84882-472-0_12
Publisher Name: Springer, London
Print ISBN: 978-1-84882-471-3
Online ISBN: 978-1-84882-472-0
eBook Packages: EngineeringEngineering (R0)