Abstract
This chapter presents two case studies of maintenance optimization in the rail industry. The first case study discusses grouping of maintenance activities into maintenance packages. The second case study uses a life cycle cost approach to prioritize between maintenance and renewal projects under budget constraints.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
21.6 References
Bing AJ, Gross A, (1983) Development of Railroad Track Degradation Models. Transportation Research Record 939, Transportation Research Board, National Research Council, National Academy Press, Washington, D.C, USA.
Bogdaanski S, Olzak M, Stupnicki J. (1996). Numerical stress analysis of rail rolling contact fatigue cracks. Wear 191:14–24
Braghin F, Lewis R, Dwyer-Joyce RS, Bruni S, (2006) A mathematical model to predict raiway wheel profile evolutio due to wear. Accepted for publication in Wear.
Budai G, Huisman D, Dekker R. (2005) Scheduling Preventive Railway Maintenance Activities. Accepted for publication in Journal of the Operational Research Society.
Carreteroa J, Pereza JM, Garcıa-Carballeiraa F, Calderona A, Fernandeza J, Garcıaa JD, Lozano A, Cardonab L, Cotainac N, Prete P, (2003) Applying RCM in large scale systems: a case study with railway networks. Reliability Engineering and System Safety 82:257–273
Dekker R, Wildeman RE, Van der Duyn Schouten, FA, (1997). A Review of Multi-Component Maintenance Models with Economic Dependence. Mathematical Methods of Operations Research, 45:411–435.
Ferreira L, Murray M, (1997) Modelling rail track deterioration and maintenance: current practices and future needs. Transport Reviews, 17(3): 207–221.
Garey MR, Johnson DS (1979). Computers and Intractability: a Guide to the Theory of NP-Completeness. W.H. Freeman and Company: New York.
Grassie SL (2005). Rolling contact fatigue on the British railway system: treatment. Wear 258:1310–1318
Hecke A, (1998) Effects of future mixed traffic on track deterioration. Report TRITA-FKT 1998:30, Railway Technology, Department of Vehicle Engineering, Royal Institute of Technology, Stockholm.
Kay AJ, (1998) Behaviour of Two Layer Railway Track Ballast under Cyclic and Monotonic Loading. PhD Thesis, University of Shefield, UK.
Li D, Selig ET, (1995) Evaluation of railway sub grade problems. Transportation Research Record. 1489:17–25.
Meier-Hirmerl C, Sourget F, Roussignol M, (2005). Optimising the strategy of track maintenance. Advances in Safety and Reliability — KoŁowrocki (ed.) Taylor & Francis Group, London.
OREDA, (2002) Offshore Reliability Data, 4th ed. OREDA Participants. Available from Det Norske Veritas, NO-1322 Høvik, Norway.
Pedregala DJ, Garcıaa FP, Schmid F (2004) RCM2 predictive maintenance of railway systems based on unobserved components models. Reliability Engineering and System Safety 83:103–110
Podofillini L, Zio E, Vatn J. Risk-informed optimization of railway tracks inspection and maintenance procedures. Reliability Engineering and System Safety 91:20–30, 2006
Reddy V, Chattopadhyay G, Larsson-Kråik PO, Hargreaves DJ, (2006). Modelling and analysis of rail maintenance cost. Accepted for publication in International Journal of Production Economic.s
Salim W, (2004): Deformation and degradation aspects of ballast and constitutive modeling under cyclic loading. PhD Thesis, university of Wollongong. Austrailia.
Sato Y, (1995) Japanese studies on deterioration of ballasted track. Vehicle System Dynamics, 24:197–208.
Sriskandarajah C, Jardine, AKS, Chan, CK (1998). Maintennace scheduling of rolling stock using a genetic algorithm. European J. Oper.Res., 35:1–15.
Telliskivi T, Olofsson U, (2004) Wheel-rail wear simulation. Wear 257 1145–1153.
Vatn J, Podofillini, P, Zio E (2003). A risk based approach to determine type of ultrasonic inspection and frequencies in railway applications. World Congress on Railway Research. Edinburgh, Scotland 28 September–1 October 2003.
Veit P, Wogowitsch M, (2003) Track Maintenance based on life-cycle cost calculations. In Innovations for a cost effective Railway Track. www.promain.org/images/publications/Innovations-LCC.pdf
Welte T, Vatn J, Heggset J, (2006) Markov state model for optimization of maintenance and renewal of hydro power components. 9th International Conference on Probabilistic Methods Applied to Power Systems, KTH, Stockholm, 11–15 June 2006.
Wildeman RE (1996). The art of grouping maintenance. PhD Thesis, Erasmus University Rotterdam, Faculty of Economics.
Zakharov S, Komarovsky I, Zharov I (1998). Wheel flange/rail head wear simulation. Wear 215. 18–24
Zarembski AM, Palese JW, (2003) Risk Based Ultrasonic Rail Test scheduling: Practical Application in Europe and North America. 6th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM2003) in Gothenburg, Sweden June 10–13, 2003
Zhang YJ, Murray MH, Ferreira L, (1997). Railway track performance models: degradation of track structures. Road and transport Research. 6(2):4–19
Zoeteman A, 2003. Life Cycle Management Plus. In Innovations for a cost effective Railway Track. www.promain.org/images/publications/Innovations-LCC.pdf
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer-Verlag London Limited
About this chapter
Cite this chapter
Vatn, J. (2008). Maintenance in the Rail Industry. In: Complex System Maintenance Handbook. Springer Series in Reliability Engineering. Springer, London. https://doi.org/10.1007/978-1-84800-011-7_21
Download citation
DOI: https://doi.org/10.1007/978-1-84800-011-7_21
Publisher Name: Springer, London
Print ISBN: 978-1-84800-010-0
Online ISBN: 978-1-84800-011-7
eBook Packages: EngineeringEngineering (R0)