Abstract
Bioenergy crop harvesting is a critical operation affecting bioenergy supply logistics. It includes the tasks of cutting, gathering, and conditioning of bioenergy crop so as to make it suitable for subsequent operations. Harvesting represents a significant amount of biomass cost at the farm gate. This chapter reviews and discusses harvesting technologies for four major bioenergy crop alternatives: energy grasses (Miscanthus and switchgrass), short rotation woody crops (willow, poplar), green crops (energy cane, sorghum, sugar cane), and agricultural crop residue (corn stover, orchard residue). It describes crop characteristics important for designing harvesting machinery and different machinery options used for harvesting promising bioenergy crops. It also describes the functional processes involved in a crop-specific harvesting operation and compares their operational principles. The harvesting machinery performance data are compiled to facilitate equipment selection. Finally, this chapter discusses observed limitations of the machinery evaluated and future challenges to be addressed.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Salassi ME, Barker FG (2008) Reducing harvest costs through coordinated sugar cane harvest and transport operations in Louisiana. J Assoc Sugar Cane Technologists 28:32–41
Shinners KJ, Boettcher GC, Muck RE, Weimer PJ, Casler MD (2010) Harvest and storage of two perennial grasses as biomass feedstocks. Trans ASABE 53(2):359–370
Wright LL, Eaton LM, Perlack RD, Stokes BJ (2012) Woody biomass. In: Ali S (ed) Comprehensive renewable energy. Elsevier, Oxford, pp 263–291
Bassam NE, Huisman W (2001) Harvesting and storage of Miscanthus. In: Jones MB, Walsh M (eds) Miscanthus: for energy and fiber. Earthscan Publishing Inc., London, pp 86–108
Grift TE, Miao Z, Phillips JW, Mathanker SK (2013) Energy and pressure requirement for compression of Miscanthus x giganteus to an extreme density. Biosyst Eng 114:21–25
Chen Y, Gratton JL, Liu J (2004) Power requirements of hemp cutting and conditioning. Biosyst Eng 87(4):417–424
Lewandowski I, Heinz A (2003) Delayed harvest of Miscanthus—influences on biomass quantity and quality and environmental impacts of energy production. Eur J Agron 19:45–63
Shinners KJ, Binversie BN, Savoie P (2003) Whole-plant corn harvesting for biomass: comparison of single-pass and multiple-pass harvest systems. ASAE Paper No. 036089. ASAE, St. Joseph, MI
Liu Q, Mathanker SK, Zhang Q, Hansen AC (2012) Biomechanical properties of Miscanthus stems. Trans ASABE 55(4):1125–1131
Igathinathane C, Womac AR, Sokhansanj S (2010) Corn stalk orientation effect on mechanical cutting. Biosyst Eng 107(2):97–106
Kaack K, Schwarz KU (2001) Morphological and mechanical properties of Miscanthus in relation to harvesting, lodging, and growth conditions. Ind Crops Prod 14:145–154
Yu M, Womac AR, Igathinathane C, Ayers PD, Buschermohle MJ (2006) Switchgrass ultimate stresses at typical biomass conditions available for processing. Biomass Bioenergy 30:214–219
Womac AR, Yu M, Igathinathane C, Ye P, Hayes D, Narayan S, Sokhansanj S, Wright L (2005) Shearing characteristics of biomass for size reduction. ASAE Paper No. 056058. ASAE, St. Joseph, MI
O’Dogherty MJ (1982) A review of research on forage chopping. J Agric Eng Res 27:267–289
Persson S, ASAE (1987) Mechanics of cutting plant material. ASAE, St. Joseph, MI
Srivastava AK, Goering CE, Rohrbach PR, Buckmaster DR (2006) Hay and harvesting. In: Engineering principles of agricultural machine, 2nd edn. ASABE, St. Joseph, MI, p 325–402
Tuck CR, O’Dogherty MJ, Baker DE, Gale GE (1991) Laboratory studies of the performance characteristics of mowing mechanisms. J Agric Eng Res 50:61–80
O’Dogherty MJ, Gale GE (1986) Laboratory studies of the cutting of grass stems. J Agric Eng Res 35(2):115–129
Johnson PC (2012) Energy requirements and productivity of machinery used to harvest herbaceous energy crops [Thesis]. University of Illinois, Urbana-Champaign (IL)
Kroes S, Harris H (1996) Cutting forces and energy during an impact cut of sugar cane stalks. Paper 96A-035. EurAgEng ‘96
CIGR (1999) CIGR Handbook of Agricultural Engineering, Volume III Plant Production Engineering, Chapter 1 Machines for Crop Production, 1.6. Harvesters and Threshers, Part 1.6.8–1.6.10 Harvesters and Threshers: Forage Crops. ASABE, St. Joseph, MI, p 348–380
Rotz CA, Shinners KJ (2007) Hay harvest and storage. In: Barnes RF, Nelson CJ, Moore KJ, Collins M (eds) Forage: the science of grassland agriculture. Blackwell Publishing Inc., London, pp 601–616
Brownell DK, Liu J, Hilton JW, Richard TL, Cauffman GR, Macafee BR (2012) Evaluation of two forage harvesting systems for herbaceous biomass harvesting. Trans ASABE 55(5):1651–1658
Seixas F, Laércio C, Rummer RB (2006) Harvesting short-rotation woody crops (SRWC) for energy. Biomassa Energia 3(1):1–16
Canto JL, Klepac J, Rummer B, Savoie P, Seixas F (2011) Evaluation of two round baling systems for harvesting understory biomass. Biomass Bioenergy 35(5):2163–2170
Lavoie F, Savoie P, Amours LD, Joannis H (2007) Development and field performance of a willow cutter-shredder-baler. In: Proceedings of the international conference on crop harvesting and processing, 11–14 February 2007 (Louisville, Kentucky USA). ASABE Publication Number 701P0307e. ASABE, St. Joseph, MI
Price R, Larsen J, Peters A (2007) Development of an optical yield monitor for sugar cane harvesting. ASABE Paper No. 071049. ASABE, St. Joseph, MI
Braunbeck O, Bauen A, Rosillo-Calle F, Cortez L (1999) Prospects for green cane harvesting and cane residue use in Brazil. Biomass Bioenergy 17(6):495–506
Hartley BE, Gibson JD, Thomasson JA, Searcy SW (2011) Machine performance of forage harvesting equipment on high-tonnage Sorghum. ASABE Paper No. 1111549. ASABE, St. Joseph, MI
Mislevy P, Fluck RC (1992) Harvesting operations and energetics of tall grasses for biomass energy production: a case study. Biomass Bioenergy 3(6):381–387
Kim S, Dale BE (2003) Global potential bioethanol production from wasted crops and crop residues. Biomass Bioenergy 26:361–375
Shinners KJ, Binversie BN, Muck RE, Weimer PJ (2007) Comparison of wet and dry corn stover harvest and storage. Biomass Bioenergy 31(4):211–221
Shinners KJ, Boettcher GC, Hoffman DS, Munk JT, Muck RE, Weimer PJ (2009) Single-pass harvest of corn grain and stover: performance of three harvester configurations. Trans ASABE 52(1):51–60
AGCO (2013) AGCO developed combine-baler baling corn stover. http://hayandforage.com/harvesting/combine-baler-same-pass-biomass-baling
ISU (2013) Photo Courtesy Department of Agricultural and Biosystems Engineering. Iowa State University, Ames, IA
Shinners KJ, Bennett RG, Hoffman DS (2012) Single- and two-pass corn grain and stover harvesting. Trans ASABE 55(2):341–350
Spinelli R, Magagnotti N, Magagnotti N, Nati C, Cantini C, Sani G, Picchi G, Biocca M (2011) Integrating olive grove maintenance and energy biomass recovery with a single-pass pruning and harvesting machine. Biomass Bioenergy 35(2):808–813
Spinelli R, Picchi G (2010) Industrial harvesting of olive tree pruning residue for energy biomass. Bioresour Technol 101(2):730–735
Rotz CA, Muhtar HA (1992) Rotary power requirements for harvesting and handling equipment. Appl Eng Agric 8(6):751–757
Mathanker SK, Maughan JD, Hansen AC, Grift TE, Ting KC (2014) Sensing miscanthus swath volume for maximizing baler throughput rate. Trans ASABE (in review)
Mathanker SK, Hansen AC, Grift TE, Ting KC (2014) Sensing miscanthus stem bending force for maximizing throughput rate in a disk mower-conditioner. Trans ASABE 57 (in press)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer Science+Business Media New York
About this chapter
Cite this chapter
Mathanker, S.K., Hansen, A.C. (2014). Harvesting System Design and Performance. In: Shastri, Y., Hansen, A., Rodríguez, L., Ting, K. (eds) Engineering and Science of Biomass Feedstock Production and Provision. Springer, New York, NY. https://doi.org/10.1007/978-1-4899-8014-4_5
Download citation
DOI: https://doi.org/10.1007/978-1-4899-8014-4_5
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4899-8013-7
Online ISBN: 978-1-4899-8014-4
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)