Kinetics and Mechanisms of the Solid-State Sintering of Alkaline-Earth Titanates

  • V. I. Lapshin
  • V. K. Yarmarkin


Alkaline-earth-titanate-based electronic ceramics are widely used in the fabrication of modern products such as capacitors, varistors, thermistors, etc.1,2 The sintering of electronically active ceramics is one of most complicated and critical operations that determine the performance and cost characteristics of such products. To gain a deeper insight into the mechanisms of the sintering of the above materials and to explore the ways of promoting this process, we studied both experimentally and theoretically mass transfer processes in sintering alkaline-earth titanates.


Barium Titanate Interparticulate Friction Particle Size Dependence Densification Kinetic Initial Sinter 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    J. M. Herbert, “Ceramic Dielectrics and Capacitors”, Gordon and Breach, New York (1985).Google Scholar
  2. 2.
    Poluprovodniki na Osnove Titanata Bariia“ (Semiconducting Barium Titanates), Energoizdat, Moscow (1982), translated from the Japanese, Gakkensha, Tokyo (1977).Google Scholar
  3. 3.
    V. I. Lapshin, Powder particle size dependence of the density of compacts (in Russian), Poroshk. Metallurg. 1: 23 (1982).Google Scholar
  4. 4.
    D. L. Johnson, Sintering kinetics for combined volume, grain boundary and surface diffusion, Phys. Sinter. 1: 1 (1969).Google Scholar
  5. 5.
    R. Freer, Bibliography: self-diffusion and impurities in oxides, J. Mater. Sci. 5: 803 (1980).CrossRefGoogle Scholar
  6. 6.
    W. H. Rhodes and W. D. Kingery, Dislocation dependence of cationic diffusion in SrTiO3, J. Am. Cer. Soc. 49: 521 (1966).CrossRefGoogle Scholar
  7. 7.
    H. U. Anderson, Initial sintering of BaTiO3 compacts, J. Am. Cer. Soc. 48: 118 (1965).CrossRefGoogle Scholar
  8. 8.
    H. U. Anderson, Initial sintering of rutile, J. Am. Cer. Soc. 50: 235 (1967).Google Scholar
  9. 9.
    V. I. Novikov, L. I. Trusov, V. V. Lapovok, and T. V. Geleishvili, On the mechanism of low-temperature diffusion activated by a migrating boundary (in Russian), Fiz. Tverd. Tela 25: 369 (1983).Google Scholar
  10. 10.
    Ya. E. Geguzin, Initial stage of active sintering: superplasticity of a porous structure (in Russian), Dokl. AN SSSR 229: 601 (1976).Google Scholar
  11. 11.
    P. S. Kislyi and M. A. Kuzenkova, “Spekanie tugoplavkikh soedinenii” (Sintering of Refractory Compounds), Naukova Dumka, Kiev (1980).Google Scholar

Copyright information

© Springer Science+Business Media New York 1989

Authors and Affiliations

  • V. I. Lapshin
    • 1
  • V. K. Yarmarkin
    • 1
  1. 1.Positron Res. and Mfg. CorporationLeningradUSSR

Personalised recommendations