Advertisement

Effect of Sintering Parameters on Microstructure and Properties of Sialon Materials

  • P. Arató
  • E. Besenyei
  • A. Kele
  • F. Weber

Abstract

The influence of some parameters of pressureless sintering on mechanical properties, microstructure and phase composition has been studied. By using different types of silicon nitride as embedding powder it has been shown that, besides weight change, density and bend strength of the samples also depend on the type of powder bed. The composition of the material was varied by changing the ratio of alumina/aluminum nitride while keeping the amount of sintering aid constant. By increasing the oxygen content we found deteriorating mechanical properties and increasing weight loss. The observed variation of microstructure and phase composition with sintering time, temperature and initial composition can be attributed to the changing composition of the liquid phase.

Keywords

Oxygen Content Silicon Nitride Pressureless Sinter Bend Strength Increase Weight Loss 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    J.Briggs, Pressureless sintering of sialon ceramics, Mat.Res.Bull. 12: 1047 (1977)Google Scholar
  2. 2.
    S. Boskovic, L.J.Gauckler, G.Petzow and T.Y.Tien, Reaction sintering forming ß -Si33N4 solid solutions in the system Si/A1/N/0: sintering of Si3N4–A1N-Al20. mixtures, Powder Metall.Int. 11 (4): 169 (1979)Google Scholar
  3. 3.
    Xu Jie and Sheng Xumin, The influence of protective powder bed on the properties of pressureless sintered Si N based materials, in: “Proc.Conf. on Microstructure and properties of ceramic materials”, T.S.Yen et al,ed., N.Holland, Amsterdam, 518 (1983)Google Scholar
  4. 4.
    M.Mimoto, N.Kuramoto and Y.Inomata, Fabrication of high strength sialon by reaction sintering, J.Mat.Sci. 14: 2309 (1979)Google Scholar
  5. 5.
    T.Ekström and N.Ingelström, The relation between phase composition and hardness of different yttrium sialon materials, in: “Proc.Int.Conf. on Hot Isostatic Pressing” Lulea 15–17 June 367 (1987)Google Scholar
  6. 6.
    T.Ekström, N.Ingelström, R.Brage, M.Hatcher and T.Johansson, sialons made from different silicon nitride powders, J.Am.Ceram.Soc. 71 (12): 1164 (1988)Google Scholar
  7. 7.
    K.H.Jack, Review: Sialons and related nitrogen ceramics, J.Mater.Sci. 11: 1135 (1976)CrossRefGoogle Scholar
  8. 8.
    C.Greskovich and S.Prochazka,Stability of Si3N4 and liquid phases(s) during sintering, J.Amer.Ceram.Soc. 64 (7):96 (1981)Google Scholar
  9. 9.
    S.Bandyopadhyay and J.Mukerji, Sintering and properties of sialons without externally added liquid phase, J.Amer.Ceram.Soc. 70 (10): C273 (1987)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 1989

Authors and Affiliations

  • P. Arató
    • 1
  • E. Besenyei
    • 1
  • A. Kele
    • 1
  • F. Weber
    • 1
  1. 1.Research Institute for Technical Physics of the Hungarian Academy of SciencesBudapestHungary

Personalised recommendations