Abstract
During the late 1950s and early 1960s, requirements for thermally stable materials produced a rapid growth in new but impracticable polymer. Impracticable because, at that time, the criterion of thermal stability was narrowly interpreted as the capacity of such polymers to withstand high temperatures over long periods in air. Thus aromatic polymers, including a number of heteroaromatic systems, were produced with excellent thermo-oxidative stability, but which, because they were intractable and infusible “brick-dusts,” had no practical value. Attempts to capitalize on the thermal stability of these materials involved introducing a degree of tractability into the system. In the case of highly conjugated aromatic polymers, as has already been seen, flexible (hinge) groups—linking the rings—led to increases in both molecular weight and tractability, but almost inevitably this was accompanied by a reduction in thermo-oxidative stability.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
J. P. Critchley, A review of the poly(azoles), in Progress in Polymer Science,A. D. Jenkins, (ed.), Pergamon Press Ltd., Oxford (1970), Vol. 2, Ch. 2.
E. I. du Pont de Nemours, French Patent No. 1,239,491 (1960); Australian Patent No. 58, 424 (1960).
A. L. Endrey, Canadian Patent No. 659,328 (1963); U.S. Patent Nos. 3,179,631 and 3,179, 633 (1965).
G. W. Bower and L. W. Frost, J. Polym. Sci. A 1, 3135 (1963).
L. W. Frost and I. Kesse, J. Appl. Polym. Sci. 8, 1039 (1964).
J. Idris Jones, F. W. Ochynski, and F. A. Rackley, Chem. and Ind. 1686 (1962).
T. M. Bogert and R. R. Renshaw, J. Amer. Chem. Soc. 30, 1140 (1908).
J. D. Seddon, U.K. Patent No. 1,192,001 (1970); 1,228, 364 (1971).
H. K. Reimschuessel, K. P. Klein, and G. J. Schmitt, Macromolecules 2, 567 (1969).
G. Rabilloud, B. Sillion, and G. De Gaudemaris, French Patent No. 1, 601, 091 (1971).
F. P. Darmory, Adhes. Age 17, (3) 22 (1974).
W. M. Edwards and I. M. Robinson, U.S. Patent No. 2,710,853 (1955); 2,867,609 (1959); 2,900, 369 (1959).
I. Tobushi, K. Tayaki, and R. Oda, J. Chem. Soc. (Japan) (Ind. Chem. Sec.) 67, 1081 (1964).
German (FDR), Ministry of Defence, U.K. Patent No. 1,076, 947 (1967).
V. L. Bell and N. T. Wakelyn, Diss. Abstr. Int. B 35, 2207 (1974).
A. V. Samokhvalov, K. N. Vlasova, L. A. Gardeeva, and L. S. Bublik, Plast. Massy 9, 15 (1971).
J. P. Critchley, P. A. Grattan, M. A. White, and J. S. Pippett, J. Polym. Sci. A 1 10, 1789 (1972).
C. E. Sroog, A. L. Endrey, S. V. Abramo, C. E. Ben, W. M. Edwards, and K. L. Olivier, J. Polym. Sci. A 3, 1373 (1965); C. E. Sroog, Polyimides, in Encyclopedia of Polymer Science and Technology, H. F. Mark, N. G. Gaylord, and N. M. Bikales, (eds.), (1969), Vol. 11, p. 249.
M. Prince and I. Honyak, J. Polym. Sci. B 4, 601, (1966).
R. A. Dine-Hart and W. W. Wright, J. Appl. Polym. Sci. 11, 609 (1967).
P. Delvigs, Li-Chen Hsu, and T. Serafini, J. Polym. Sci. B 8, 29 (1970).
M. L. Wallach, J. Polym. Sci. A 2, 653 (1967).
A. L. Endrey, U.S. Patent No. 3,179, 630 (1965).
J. A. Kreuz, U.S. Patent No. 3,541, 057 (1970).
E. R. Hoegger, U.S. Patent No. 3,342, 774 (1967).
R. J. Angels, U.S. Patent No. 3,282,898 (1966), 3,345, 342 (1967).
J. A. Kruez, A. L. Endrey, F. P. Gray, and C. E. Sroog, J. Polym. Sci. A 1, 2607 (1966).
V. V. Korshak, S. V. Vinogradova, Y. S. Vygod’skii, S. M. Pavlova, and L. V. Boyko, Izvest. Akad. Nauk S.S.S.R. Ser. Khim. 10, 2267 (1967).
S. V. Vinogradova, G. L. Slonimskii, Y. S. Vygod’skii, A. A. Askadskii, A. I. Mzhel’skii, N. A. Churchina, and V. V. Korshak, Polym. Sci. U.S.S.R A 11, 3098 (1969).
S. V. Vinogradova and Y. S. Vygod’skii, Russ. Chem. Rev. 42, 551 (1973).
M. H. Leucheux and A. D. Bondert, J. Polym. Sci. 48, 405 (1960).
W. Wrasidlo, P. Hergenrother, and H. Levine, Polym. Preprints 5, 141 (1964).
A. Ya Ardashnikov, E. I. Kardash, B. V. Kotov, and A. N. Pravednikov, Dokl. Akad. Nauk S.S.S.R. 164, 1293 (1966).
A. S. Teleshova, E. M. Teleshov, and A. N. Pravednikov, Polym. Sci. U.S.S.R. 13, 2593 (1971).
E. Sacher and D. G. Sedor, J. Polym. Sci. 12, 629 (1974).
Yu N. Sazanov, L. V. Krasilnikova, and L. M. Scherbavava, Eur. Polym. J. 11, 801 (1975).
G. A. Lusheikin, V. V. Surova, B. L. Gringnt, M. L. Dobrokhotova, L. N. Emelyanova, and V. D. Voroblev, Soy. Plast. 8, 31 (1972).
L. A. Lauis, M. I. Bessonov, and F. S. Florinskii, Polym. Sci. U.S.S.R. 13, 2257 (1971).
E. Lavin, A. H. Markhart, and R. E. Kass, French Patent No. 1, 360, 488 (1963).
E. I. du Pont de Nemours, French Patent No. 1, 399, 077 (1965).
R. J. W. Reynolds and J. D. Seddon, J. Polym. Sci. 23, 45 (1968).
Y. Imai, J. Polym. Sci. B 8, 555 (1970).
Y. Imai and K. Kojima, J. Polym. Sci. A 1, 2091 (1972).
E. M. Boldebuck and J. K. Klebe, U.S. Patent No. 3,303, 157 (1967).
R. A. Dine-Hart and W. W. Wright, Reinforced Plastics Group Conference, New and Improved Resin Systems, London (1973), Paper 7.
D. R. Dixon, J. B. Rose, and C. N. Turton, U.S. Patent No. 3,832, 330 (1974).
Societe Rhodiacata, Netherlands Patent No. 6, 690, 214 (1967).
R. A. Meyers, J. Polym. Sci. A 1, 2757 (1969).
P. S. Carleton, W. J. Farrissey, and J. S. Rose, J. Appl. Polym. Sci. 16, 2983 (1972).
W. J. Farrissey, L. M. Alberino, and A. A. R. Sayigh, J. Elast. Plast. 7, 285 (1975).
W. M. Alvino and L. E. Edelman, J. Appl. Polym. Sci. 19, 2961 (1975).
The Upjohn Company, U.S. Patent No. 3,708, 458 (1973).
K. W. Rausch, W. J. Farrissey, and A. A. R. Sayigh, Proc. 28th Ann. Tech. Conf. Reinf. Plast.IComp. Inst. Soc. Plast. Ind. (1973), Sect. 11-E.
B. K. Onder, U.S. Patent No. 4,094, 864 (1978).
S. L. Cooper, A. D. Mair, and A. V. Tobolsky, Textile Res. J. 35, 1110 (1965).
R. E. Coulehan and T. L. Pickering, Polym. Preprints 12, 305 (1971).
V. L. Bell, B. L. Stump, and H. Gager, J. Polym. Sci., Polym. Chem. Ed. 14, 2275 (1976).
A. V. Sidorovich and Ye. V. Kushinskii, Polym. Sci. U.S.S.R. A 10, 1627 (1968).
J. K. Gillham and H. C. Gillham, Polym. Eng. Sci. 13, 447 (1973).
J. M. Barton and J. P. Critchley, Polymer 11, 212 (1970).
G. M. Bower, J. H. Freeman, E. J. Traynor, L. W. Frost, H. A. Burgman, and C. R. Ruffing, J. Polym. Sci. A 1 6, 877 (1968).
E. I. du Pont de Nemours, U.S. Patent No. 3,492,270 (1970); 3,533, 997 (1970).
J.P. Critchley, U.K. Patent No. 1,373,904 (1974); 1,457,191 (1976); also unpublished work.
Dupont, Product Bulletin A-44627, -46069, -48710.
Anon., Materials Eng. 2, 69 (1974).
J. F. Heacock and C. E. Ben, SPE Trans. 4, 105 (1965).
B. W. Melvin and D. J. Parish, Insulation 9, 120 (1965).
J. R. Cannizzaro, Solid State Tech. 11, 31 (1969).
Anon., Br. Plast. 41 69 (February, 1968).
Dupont, Product Bulletin A-52349, -74598, -83708, E-06470, -17624, -19546.
Anon., Plastics 33, 372 (1968).
J. D. Hensel, Plast. Eng. 33, 20 (1977).
Dupont, Product Bulletin A-62113, -64675.
M. W. Westley, 19th Nat. SAMPE Symp. 19, 135 (1974).
L. E. Lorensen, SAMPE Q. 6, 1 (1975).
The Monsanto Company, Skybond 700 Series, Tech. Bull. No. 6234–6239.
American Cyanamid (Bloomingdale Dept.), FM-34 Product Bulletin (1971).
R. A. Pike, R. C. Novak, and M. A. DeCrescente, Proc. 30th Ann. Tech. Conf. Reinf. Plast./ Comp. Inst. Soc. Plast. Ind. (1975), Sect. 18-G.
J. L. Cotter, Rev. High Temp. Mater. 3 (4), 277 (1978).
Anon., Mater. Eng. 5, 73 (1976).
F. P. Darmory, 5th Nat. SAMPE Tech. Conf. 5, 415 (1973).
Anon., SAMPE J. 10, 120 (1974).
L. N. Phillips and K. F. Rogers, Composites 1, 286 (1970).
Hexcel Aerospace Company, Data Bulletins 123, 9500, 9501, 9510, 9520, 3100.
F. P. Darmory and M. DiBenedetto, U.S. Patent No. 3,705,869 (1972); 3,748, 338 (1973).
F. W. Harris, W. A. Feld, and L. H. Lanier, J. Polym. Sci. B 13, 283 (1975).
G. I. Timofeyeva, S. A. Pavlova, G. M. Tseitlin, V. I. Azevov, V. I. Skoortsova, and V. V. Korshak, Polym. Sci. U.S.S.R. 13, 2637 (1971).
D. E. Green, U.S. Patent No. 3,338, 859 (1967).
W. A. Fessier, U.S. Patent No. 3,736, 290 (1972).
N. A. Adrova, M. M. Koton, and L. K. Prokhorova, Dokl. Akad. Nauk S.S.S.R. 177, 579 (1976).
A. Rie, French Patent No. 1, 529, 727 (1968).
J. A. Webster, J. M. Butler, and T. J. Morrow, Polym. Preprints 13, 612 (1972).
F. E. Rogers, U.S. Patent No. 3,356, 648 (1967).
H. H. Gibbs, Proc. 28th Ann. Tech. Conf. Reinf. Plast.lComp. Inst. Soc. Plast. Ind. (1973), Sect. 2-D.
H. H. Gibbs and C. V. Breder, Polym. Preprints 15, 775 (1974).
H. H. Gibbs, 7th Nat. SAMPE Tech. Conf. 7, 244 (1975); 21st Nat. SAMPE Symp. 21, 592 (1976).
K. L. Olivier, U.S. Patent No. 3,234, 181 (1966).
V. L. Bell, U.S. Patent No. 4,094, 862 (1978).
L. Ade, U.S. Patent No. 3,726, 834 (1973).
J. H. Bateman, W. Geresey, and D. S. Neiditch, Org. Coat. and Plast. Chem. Preprints 35, (2) 77 (1975).
W. Collins and T. Villani, Paper presented at Conference on Thermosets versus High Performance Thermoplastics, New Haven, Connecticut, October, 1977.
J. Preston and W. B. Black, Appl. Polym. Symp. 21, 61 (1973).
L. W. Frost, G. M. Bower, J. H. Freeman, H. A. Burgman, E. J. Traynor, and C. R. Ruffing, J. Polym. Sci. A 1 6, 215 (1968).
J. Preston, W. DeWinter, and W. B. Black, J. Polym. Sci. A 1 10, 1377 (1972).
W. Wrasidlo and J. M. Augl, J. Polym. Sci. A 1 7, 321 (1969).
F. Hayano and K. Komoto, J. Polym. Sci. A 1 10, 1263 (1972).
L. W. Frost and G. M. Bower, U.S. Patent No. 3,179, 635 (1965).
F. F. Holub, U.S. Patent No. 3,277, 043 (1966).
J. H. Incremona and D. Stregar, U.S. Patent No. 3,852, 106 (1974).
M. W. Alvino and L. W. Frost, J. Polym. Sci. A 1 8, 2209 (1971).
R. E. Van Strian and J. R. Erzner, U.S. Patent No. 3,377, 321 (1968).
J. G. Wirth and D. R. Heath, U.S. Patent No. 3,838, 097 (1974).
H. A. Newey and H. V. Adler, U.S. Patent No. 3,692, 705 (1972).
S. Oswitch, Composites 5, 55 (1974).
S. L. Kaplan, E. L. Mitch, and A. Katzakian, Proc. 30th Ann. Tech. Conf. Reinf. Piast./ Comp. Inst. Soc. Plast. Ind. (1975), Sect. 19-A.
M. F. Sorokin, I. M. Kochnov, and L. G. Shode, Plast. Massy 2, 47 (1974).
H. H. Gibbs, 10th Nat. SAMPE Tech. Conf. 10, 211 (1978); 23rd Nat. SAMPE Symp. 23, 806 (1978); 24th Nat. SAMPE Symp. 24, 11 (1979).
H. H. Gibbs and J. R. Ness, SAMPE J. 15, 11 (1979).
P. S. Blatz, Adhes. Age 21, 39 (1978).
Dupont, NR-150 Polyimide Precursor Solutions, Product Bulletin E-08227(3/77).
Fiberite Corporation, NR-150B2/Unidirectional Type Prepreg Bulletin (4/6/78).
Hexcel Corporation, Hexstrand Advanced Composite Materials from Hexcel, May 1979.
A. K. St. Clair, N. S. Slemp, and T. L. St. Clair, 23rd Nat SAMPE Symp. 23, 113 (1978).
Anon., Product Eng. 4, 46 (1973).
The Upjohn Company, Donald S. Gilmore Laboratories, DSG Reports and Tech. Bulletins.
D. J. Goldwasser and E. P. Otocka, Org. Coat. and Plast. Chem. Preprints 35, (2) 198 (1975).
Rhone-Poulenc Co., Product Bulletins 6463/6473 and Data Sheets from Dept. of Thermostable Polymers.
J. Chambion, Chem. Ind. Genie Chim. 106, 453 (1973).
Amoco Chemical Corp., Torlon Engineering Resins,Tech. Bulletins and Data Sheets (TB-47 and AT-C/1978).
I. E. Coleman and J. A. Conrady, J. Polym. Sci. 38, 241 (1953).
P. O. Tawney, R. H. Snyder, R. P. Conger, K. A. Leibbrand, C. H. Stiteler, and A. R. Williams, J. Org. Chem. 26, 15 (1961).
R. C. P. Cubben, Polymer 6, 419 (1965).
J. K. Stille and R. Morgan, J. Polym. Sci. A 3, 2379 (1965).
F. W. Harris and S. O. Norris, J. Polym. Sci., Polym. Chem. Ed. 11, 2143 (1973).
R. Oda, K. Takagi, and T. Shono, J. Polym. Sci. B7, 11 (1969).
Y. Musa and M. P. Stevens, J. Polym. Sci. A 1 10, 319 (1972).
F. C. DeSchryver, W. J. Feast, and G. Smets, J. Polym. Sci. A 1 8, 1939 (1970).
F. Grundschober and J. Sambeth, U.S. Patent No. 3,533, 996 (1970).
W. J. Gilwee, R. W. Rosser, and J. A. Parker, 18th Nat. SAMPE Symp. 18, 284 (1973).
G. T. Kwiatkowski, L. M. Robeson, G. L. Brode, and A. W. Bedwin, J. Polym. Sci., Polym. Chem. Ed. 13, 961 (1975).
F. F. Holub and C. M. Emerick, Canadian Patent No. 959, 494 (1974).
H. D. Stenzenberger, Appl. Polym. Symp. 22, 77 (1973) and 31, 91 (1977).
G. Menges, A. limier, and H. D. Stenzenberger, Kunststoffe 63, 911 (1973).
D. O. Hummel, K. U. Heinen, H. D. Stenzenberger, and H. Siesler, J. Appl. Polym. Sci. 18, 2015 (1974).
P. Kovacic and R. W. Hein, J. Amer. Chem. Soc. 81, 1187 (1959).
T. V. Sheremeteva, J. Polym. Sci. C 5, 1631 (1967).
M. Bargain, A. Combet, and P. Grosjean, U.K. Patent No. 1,280,846 (1972); 1,280, 847 (1972).
M. Gruffaz, German Patent No. 2, 251, 065 (1973).
M. A. J. Mallet, Mod. Plast. 50, 78 (1975).
M. A. J. Mallet and F. P. Darmory, Polyaminobismaleimides, in New Industrial Polymers, D. Deanin, (ed.), Marcel Dekker, N.Y. (1975), Ch. 9, p. 112.
F. P. Darmory, Processable polyimides, in New Industrial Polymers, D. Deanin, (ed.), Marcel Dekker, N. Y. (1975), Ch. 10, p. 124.
J. V. Crivello and P. C. Juliano, J. Polym. Sci., Polym. Chem. Ed. 13, 1819 (1973).
A. A. Berlin, B. I. Liogonkii, and B. I. Zapadinskii, Soviet Patent No. 584014 (1979).
A. M. Kandybko, A. M. Kotukhova, A. P. Suslov, V. S. Volkov, and S. A. Dolmatov, Plast. Massy 10, 43 (1978).
Yu A Mikhaylin and Ye. B. Trostyanskaya, Plast. Massy 10, 18 (1978).
H. R. Lubowitz, U.S. Patent No. 3,528,950 (1970); 3,781,240 (1973); 3,827, 927 (1974).
H. R. Lubowitz, Polym. Preprints 12, 561 (1971).
H. R. Lubowitz, W. P. Kendrick, J. F. Jones, R. S. Thorpe, and E. A. Burns, U.S. Patent No. 3,647, 529 (1972).
T. T. Serafini and P. Delvigs, Appl. Polym. Symp. 22, 89 (1973).
S. L. Kaplan, D. Helfand, and S. S. Hirsh, Proc. 27th Ann. Tech. Conf. Reinf. Plast.lComp. Inst. Soc. Plast. Ind. (1972), Sect. 2-A.
S. L. Kaplan and S. H. Hirsh, Polyimides, chemistry, processing, properties, in New Industrial Polymers, R. D. Deanin, (ed.), Marcel Dekker, N.Y. (1975), Ch. 8, p. 100.
R. W. Vaughan, R. J. Jones, and E. A. Burns, Proc. 28th Ann. Tech. Conf. Reinf. Plast./ Comp. Inst. Soc. Plast. Ind. (1973), Sect. 17-E.
S. L. Kaplan and C. W. Snyder, Proc. 29th Ann. Tech. Conf. Reinf. Plast.IComp. Inst. Soc. Plast. Ind. (1974), Sect. 11-B.
A. K. St. Clair and T. L. St. Clair, Org. Coat. and Plast. Chem. Preprints 35, 77 (1975).
T. T. Serafini, P. Delvigs, and G. R. Lightsey, J. Appl. Polym. Sci. 16, 905 (1972); U.S. Patent No. 3,745, 149 (1973).
T. T. Serafini, R. D. Vannucci, and W. B. Alston, Proc. 30th Ann. Tech. Conf. Reinf. Plast.! Comp. Inst. Soc. Plast. Ind. (1975), Sect. 14-E.
M. P. Hanson and C. C. Chamis, Proc. 29th Ann. Tech. Conf., Reinf. Plast.lComp. Inst. Soc. Plast. Ind. (1974), Sect. 16-C.
T. L. St. Clair and R. A. Jewell, 23rd Nat. SAMPE Symp. 23 520 (1978).
T. T. Serafini, R. D. Vannucci, and W. B. Alston, NASA TM 71894 (1976).
W. E. Winters and P. J. Cavano, 10th Nat. SAMPE Tech. Conf. 10, 661 (1978).
N. Bilow, A. L. Landis, and T. J. Aponyi, 20th Nat. SAMPE Symp. 20, 618 (1975).
N. Bilow and A. L. Landis, 8th Nat. SAMPE Tech. Conf. 8, 94 (1976).
R. H. Boschan, A. L. Landis, and T. J. Aponyi, 21st Nat. SAMPE Symp. 21, 356 (1976).
M. D. Sefcik, E. O. Stejskal, R. A. McKay, and J. Schaefer, Macromolecules 12, 423 (1979).
T. J. Aponyi, C. B. Delano, J. D. Dodson, R. J. Milligan, and J. M. Hurst, 23rd Nat. SAMPE Symp. 23, 763 (1978).
N. Bilow, L. B. Keller, A. L. Landis, R. H. Boschan, and A. A. Castillo, 23rd Nat. SAMPE Symp. 23, 791 (1978).
Rhone—Poulenc, Kerimid 601, Product Report 6413.
F. P. Darmory, 18th Nat. SAMPE Symp. 18, 317 (1973); SAMPE J. 10, 33 (1974).
Rhone-Poulenc, Kinel Moulding Compounds, Product Reports CFH 723/923.
Anon., Mater. Eng. 6, 33 (1970).
J. M. Witzel, R. J. Jablonski, and D. Kruh, Chem. Tech. 7, 441 (1972).
Hexcel Corp., F-178 Polyimide, Product Bull. (1/15/78).
Fiberite Corp., Polyimide Molding Compounds, Product Data Sheet.
Ciba—Geigy Corp., P13N, Polyimide Laminating Varnish Product Bulletin.
F. P. Darmory, S. S. Hirsch, and S. L. Kaplan, SAMPE J. 1, 9 (1972).
Gulf Oil Co., Thermid 600 Polyimide Resins, Product Bull. (1978).
J. K. Gillham, K. D. Hallock, and S. J. Stadnicki, J. Appl. Polym. Sci. 16, 2595 (1972).
S. V. Vinogradova, V. V. Korshak, and Y. S. Vygodskii, Vysokomol. Soed. A 8, 809 (1966).
J. P. Critchley and Mary A. White, J. Polym. Sci. A 1, 1809 (1972).
190. P. Delvigs Polymer Eng. Sci. 16 323 (1976).
W. W. Wright, Application of thermal methods to the study of the degradation of polyimides, in Developments in Polymer Degradation-3,N. Grassie, (ed.), Applied Science Publishers, London (1981), Ch. 1.
R. A. Dine—Hart and W. W. Wright, Makromol. Chem. 153, 237 (1972).
G. J. Knight, High-temperature properties of thermally stable resins, in Developments in Reinforced Plastics-1,G. Pritchard, (ed)., Applied Science Publishers, London (1980), Ch. 6.
F. P. Gay and C. E. Ben, J. Polym. Sci. A 1 6, 1935 (1968).
A. S. Teleshova, E. N. Teleshov, and A. N. Pravednikov, Polym. Sci., U.S.S.R. A13, 2593 (1971).
G. F. L. Ehlers, K. R. Fisch, and W. R. Powell, J. Polym. Sci. A 1 8, 3511 (1970).
Z. A. Kabilov, T. M. Muinov, L. A. Shibaev, Y. N. Sazanov, L. N. Korzhavin, and N. R. Prokopchuk, Thermochimica Acta 28, 333 (1979).
J. Zurakowska-Orszagh, T. Chreptowicz, A. Orzeszko, and J. Kaminski, Eur. Polym. J. 15, 409 (1979).
L. C. Scala and W. M. Hickam, J. Appl. Polym. Sci. 9, 245 (1965).
B. M. Kovarskii, N. G. Annenkova, V. V. Guryanova, and A. B. Blyumenfeld, Polym. Sci. U.S.S.R. A15, 2783 (1973).
H. J. Dussel, H. Rosen, and D. O. Hummel, Makromol. Chem. 177, 2343 (1976).
R. A. Dine—Hart, D. B. V. Parker, and W. W. Wright, Br. Polym. J. 3, 226 (1971).
Dupont, Product Bulletin H-1B.
Dupont, Product Bulletin F-1A.
Dupont, Product Bulletin H-2; Dupont, Product Bulletin H-4.
Dupont, Vespel Design Handbook; Dupont, Vespel Precision Parts.
Upjohn, Highlights: Polyimide 2080, Report No. 5.
Y. T. Chen, 23rd Nat. SAMPE Symp. Exhib. 23, 826 (1978).
Anon., Plast. Technol. 25, 23 (1979).
H. E. Sliney and T. P. Jacobson, J. Amer. Soc. Lubrication Eng. 31, 609 (1975).
H. Lee, D. Stoffey, and K. Neville, New Linear Polymers, McGraw-Hill, N.Y. (1967), p. 194.
W. Grunsteidl, Kunststoffe 58, 739 (1968).
P. M. Hergenrother, SAMPE Q. 3, 1 (1971).
T. St. Clair and D. J. Progar, Polym. Preprints 16, 538 (1975).
D. J. Progar and T. St. Clair, 7th Nat. SAMPE Tech. Conf. 7, 126 (1975).
216. P. S. Blatz, NASA Contractor Report 3017, (July 1978).
J. P. Critchley and W. W. Wright, Rev. High Temp. Mater. 4, 107 (1979).
C. E. Browning and J. A. Marshall, J. Composite Mater. 4, 390 (1970).
R. A. Pike and M. A. DeCresente, Proc. 26th Ann. Tech. Conf. Reinf. Plast./Comp. Inst. Soc. Plast. Ind. (1971), Sect. 13-D.
M. P. Hanson and T. T. Serafini, NASA TN-D-6604 (1971).
R. J. Jones, R. W. Vaughan, and E. A. Burns, NASA CR-72984 (1971).
R. Kollmansberger and E. Birchfield, MCAIR 72–009 (1972).
P. J. Cavano, R. J. Jones, and R. W. Vaughan, NASA CR-72983 (1972).
N. Sung and F. J. McGarry, AMMRC-CTR-73–31 (1973).
W. Wolkowitz and L. M. Poveromo, 28th Ann. Tech. Conf. Reinf. Plast.lComp. Inst. Soc. Plast. Ind. (1973), Sect. 15-C.
T. T. Serafini and P. Delvigs, NASA TM X - 2798 (1973).
H. Petrovicki, H. D. Stenzenberger, and A. Harnier, 32nd SPE Ann. Tech. Conf. 32, 88 (1974).
W. F. Wennhold, CASD-NSC-74–001 (1974).
R. T. Alvarez and F. P. Darmory, 20th Nat. SAMPE Symp. 20, 253 (1975).
R. W. Vaughan, R. J. Jones, M. K. O’Rell, and T. V. Roszhart, 20th Nat. SAMPE Symp. 20, 365 (1975).
W. E. Winters and T. T. Serafini, 20th Nat. SAMPE Symp. 20, 629 (1975).
T. L. St. Clair and R. A. Jewell, 8th Nat. SAMPE Tech. Conf. 8, 82 (1976).
233. P. J. Cavano and W. E. Winters, NASA CR-135113 (1976).
B. L. Lee and F. J. McGarry, AMMRC-CTR-76–10 (1976).
N-H. Sung and F. J. McGarry, Polym. Eng. Sci. 16, 426 (1976).
J. S. Jones, 21st Nat. SAMPE Symp. 21, 438 (1976).
I. Petker, 21st Nat. SAMPE Symp. 21, 37 (1976).
NASA CR-132685 (1975).
Amoco Bulletin HT 6a.
240. I. Serlin, A. H. Markart, and E. Lavin Proc. 25th Ann. Tech. Conf. Reinf. Plast. /Comp. Div. Soc. Plast. Ind. (1970), Sect. 19-A.
M. C. Cray, Paper presented at Plastics Institute RPG Conference, Reinforced plastics in aerospace applications, London, 5–6 April, 1973.
Upjohn, Highlights: Polyimide Fibers,Report No. 3.
R. S. Irwin and W. Sweeney, J. Polym. Sci. C 19, 43 (1967).
244. J. Veghte, A. R. Marko, and C. Wilson, AD Report No. 754935/1974.
J. H. Ross, Textile Res. J. 32, (9) 768 (1969).
J. H. Ross and R. M. Stanton, Appl. Polym. Symp. 21, 109 (1973).
J. Meisenheimer and B. Wieger, J. Pract. Chem. 15, 152 (1938).
C. G. Overberger, B. Kosters, and T. St. Pierre, J. Polym. Sci. A 1 5, 1987 (1967).
K. C. Brinker and I. M. Robinson, U.S. Patent No. 2,895, 948 (1959).
S. W. Shalaby, R. L. Lapinski, and E. A. Turi, J. Polym. Sci., Polym. Chem. Ed. 12, 2891 (1974).
H. Vogel and C. S. Marvel, J. Polym. Sci. 50, 511 (1961).
H. Vogel and C. S. Marvel, J. Polym. Sci. A 1, 1531 (1963).
C. S. Marvel and H. A. Vogel, U.S. Patent No. 3,174, 947 (1965).
H. H. Levine and R. D. Stacy, AFML-TR-65–350 (1966), p. 45.
A. B. Conciatori and E. C. Chenevey, Macromol. Syn. 3, 24 (1968).
A. B. Conciatori, E. C. Chenevey, T. C. Bohrer, and A. E. Prince, J. Polym. Sci. C 19, 49 (1967).
L. P. Suffredini, U.S. Patent No. 3,340, 325 (1967).
H. H. Levine, C. B. Delano, and K. J. Kjoller, Polym. Preprints 5, 160 (1964).
A. A. Izyneev, V. V. Korshak, T. M. Frunze, and V. V. Kurashov, Irv. Akad. NaukS.S.S.R., Otdel., Khim. Nauk 10, 1828 (1963).
W. Wrasidlo and H. H. Levine, J. Polym. Sci. A 2, 4995 (1964).
D. N. Gray and G. P. Schulman, J. Macromol. Sci. A 1, 395 (1967).
Y. Ohfiyu and T. Eguchi, U.S. Patent No. 3,655, 632 (1972).
G. Rabilloud, B. Sillion, and G. De Gaudemaris, French Patent 1, 526, 830 (1968).
D. N. Gray, L. L. Rouch, and E. I. Strauss, Macromolecules 1, 478 (1968).
H. H. Levine, AFML-TR-64–365 1 (1964), Pt. 1.
B. Durif-Varambon, B. Sillion, and G. De Gaudemaris, C.R. Acad. Sci. (Paris), Ser. C, 267, 471 (1968).
B. Sillion and G. De Gaudemaris, Bull. Soc. Chim. (France) 12, 4452 (1970).
A. R. Gerber, H. Kokelenberg, and C. S. Marvel, J. Polym. Sci. 11 1703 (1973). J. Polym. Sci. A 1 8 3199 (1970).
G. Rabilloud, B. Sillion, and G. De Gaudemaris, French Patent 1, 492, 776 (1967).
R. Pense and C. S. Marvel, J. Polym. Sci. A 1 8, 3189 (1970).
F. L. Hedberg and C. S. Marvel, J. Polym. Sci., Polym. Chem. Ed. 12, 1823 (1974).
Y. Iwakura and K. Uno, Japanese Patent 70, 18675 (1970).
V. V. Korshak, A. L. Rusanov, and R. D. Katsarava, Izv. Akad. Nauk S.S.S.R. Ser. Khim. 2, 480 (1969).
V. V. Korshak, A. L. Rusanov, D. S. Tugushi, and G. M. Cherkasova, Macromolecules 5, 807 (1972).
S. Hara, M. Seo, M. Uchida, T. Yoshida, Y. Yoshida, and Y. Imai, U.S. Patent No. 3,518, 234 (1970).
A. E. Prince, U.S. Patent No. 3,551, 389 (1970).
G. Rabilloud, B. Sillion, and G. De Gaudemaris, French Patent No. 1, 530, 445 (1968).
E. C. Chenevey and A. B. Conciatori, U.S. Patent No. 3,433, 772 (1969).
A. A. Izyneev, V. P. Maznrevskii, and V. V. Korshak, Polym. Sci. U.S.S.R. 17, 1374 (1975).
R. Brand, M. Bruma, R. Kellman, and C. S. Marvel, J. Polym. Sci., Polym. Chem. Ed. 16, 2275 (1978).
D. I. Packham, J. D. Davies, and H. M. Paisley, Polymer 10 923 (1969). ’
D. S. Tugushi, V. V. Korshak, A. L. Rusanov, V. G. Danilov, G. M. Cherkasova, and G. M. Tseitlin, Polym. Sci. U.S.S.R. 15, 1087 (1973).
V. V. Korshak, A. L. Rusanpv, I. M. Gverdtsiteli, D. S. Tugushi, and A. S. Shubashvili, Dokl. Akad. Nauk S.S.S.R. 240, 346 (1978).
V. V. Korshak, I. M. Gverdtsiteli, L. G. Kipiani, D. S. Tugushi, and A. L. Rusanov, Polym. Sci. U.S.S.R. 21, 133 (1979).
C. N. Zenner and H. W. Steinman, U.S. Patent No. 3,729, 453 (1973).
V. V. Korshak, E. S. Krongauz, and A. V. D’yachenko, U.S.S.R. Patent No. 228,941 (1968). Izobret. Prom. Obraztsy, Tovarnye Znaki. 45, (32) 75 (1968).
N. Yoda and M. Kurihara, J. Polym. Sci., Pt. D (Macromol. Revs.) 5, 109 (1971).
Y. Iwakura, K. Uno, and Y. Imai, J. Polym. Sci. A 2, 2605 (1964); Makromol. Chem. 77, 33 (1964).
Y. Iwakura, Y. Imai, S. Inone, and K. Uno, Makromol. Chem. 95, 236 (1966).
V. V. Korshak, A. L. Rusanov, O. M. Zurlova, Ts. G. Iremashvili, S. N. Leonteva, and R. D. Katsarava, U.S.S.R. Patent No. 399,515 (1973). Otkrytiya, Izobret., Prom. Obraztsy, Tovarnye, Znaki 50, (39) 64 (1973).
V. V. Korshak, E. S. Krongauz, A. L. Rusanov, and A. P. Travnikova, Polym. Sci. U.S.S.R. 16, 38 (1974).
H. Kokelenberg and C. S. Marvel, J. Polym. Sci. A 1 8, 3235 (1970).
I. Matei, Gh. Mandrie, V. Taranu, and I. A. Schneider, Rev. Roum. Chim. 12, 715 (1967).
I. K. Vanna and Veena, J. Polym. Sci., Polym. Chem. Ed. 14, 973 (1976); J. Macromol. Sci. Chem. A 11, 845 (1977).
Y. Tsur, H. H. Levine, and M. Levy, J. Polym. Sci., Polym. Chem. Ed. 12, 1515 (1974).
M. Saga, T. Shono, and K. Shinra, Kogyo Kagaku Zasshi 70, 585 (1967).
T. Shono, M. Izumi, S. Matsumura, and N. Asano, Japanese Patent No. 68, 15995 (1968).
E. W. Neuse, Chem. and Ind. (London) 7, 315 (1975).
V. V. Korshak, S. V. Vinogradova, and V. A. Pancratov, Vysok. Soed. B 13, 550 (1971).
C. D. Dudgeon and O. Vogl, J. Polym. Sci., Polym. Chem. Ed. 16, 1831 (1978).
V. V. Korshak, T. M. Frunze, V. V. Kurachev, and G. P. Lopatina, Polym. Sci. U.S.S.R. 6, 1379 (1964).
T. M. Frunze, V. V. Korshak, and A. A. Izyneev, Izvest. Akad. Nauk S.S.S.R. Ser. Khim. 11, 2104 (1964).
B. M. Ginzburg, N. V. Mikhailova, V. N. Nikitin, A. V. Sidorovich, Sh. Tuichiev, and S. Ya. Frenkel, Polym. Sci. U.S.S.R. 9, 2694 (1967).
S. Ya. Frenkel and B. M. Ginzburg, J. Polym. Sci. C 22, 813 (1967).
N. A. Adrova, S. Ya. Frenkel, M. M. Koton, L. N. Kotzhavin, L. M. Pyrkov, L. A. Laius, T. P. Pushkina, E. M. Moskvina, and B. M. Ginzburg, U.S.S.R. Patent No. 202, 430 (1967).
A. Ya. Yakubovich, G. G. Rozantsev, G. I. Braz, and V. P. Bazov, Polym. Sci. U.S.S.R. 6, 922 (1964).
L. Plummer and C. S. Marvel, J. Polym. Sci. A 2, 2559 (1964).
D. Burmeister, M. Sander, and K. H. Bergert, Makromol. Chem. 89, 199 (1965).
J. K. Gillham, Science 139, 494 (1963).
C. S. Marvel, ML-TDR-64–39 V, 85 (1968).
J. Green and N. Mayes, J. Macromol. Sci. Chem. A 1, 135 (1967).
K. Mitsuhashi and C. S. Marvel, J. Polym. Sci. A 3, 1661 (1965).
V. V. Korshak, M. M. Teplyakov, and R. D. Fedorova, Polym. Sci. U.S.S.R. A 11, 2117 (1970).
V. V. Korshak, M. M. Teplayakov, and R. D. Fedorova, J. Polym. Sci. A 1 9, 1027 (1971).
N. N. Voznesenskaya, V. I. Berendyaev, B. V. Kotov, V. S. Voishchev, and A. N. Pravednikov, Vysok. Soed. B 16, 114 (1974).
N. V. Karayakin, I. B. Rabinovich, V. V. Korshak, A. L. Rusanov, D. S. Tugushi, A. N. Mochalov, and V. N. Sapozhnikov, Polym. Sci. U.S.S.R. 16, 795 (1974).
V. V. Korshak, A. A. Izyneev, V. P. Mazurevskii, V. D. Vorob’ev, M. V. Cherkasov, and A. D. Markov, U.S.S.R. Patent No. 491,667 (1975). Otkrytiya Izobret. Prom. Obraztsy, Tovarnye Znaki 52, 68 (1975).
A. A. Izyneev, V. P. Mazurevskii, A. D. Markov, and V. V. Korshak, Dokl. Akad. Nauk S.S.S.R. 231, 1126 (1976).
R. T. Foster and C. S. Marvel, J. Polym. Sci. A 3, 417 (1965).
T. M. Frunze, V. V. Korshak, A. A. Izyneev, and V. V. Kevaelev, Polym. Sci. U.S.S.R. 7, 313 (1965).
N. A. Adrova, M. M. Koton, and L. K. Prokharova, Dokl. Akad. Nauk. S.S.S.R. 166, 9 (1966).
V. V. Korshak, G. M. Tseitlin, G. M. Cherkasova, and N. A. Berezkina, Izv. Akad. Nauk S.S.S.R., Ser. Khim 9, 2143 (1968).
V. V. Korshak, V. M. Mamedov, and G. E. Golubkov, Polym. Sci. U.S.S.R. 14, 2718 (1972).
V. V. Korshak, I. F. Manucharova, T. M. Frunze, and V. V. Kurashev, Polym. Sci. U.S.S.R. 6, 1540 (1964).
R. Salle, B. Sillion, and G. De Gaudemaris, Makromol. Chem. 135, 279 (1970).
T. V. L. Narayan and C. S. Marvel, J. Polym. Sci. A 5, 1113 (1967).
V. V. Korshak, V. V. Izyneev, A. M. Egorov, N. Sh. Aldarova, and A. D. Markov, U.S.S.R. Patent No. 350,805 (1972). Otkrytiya. Izobret. Prom. Obraztsy, Tovarnye Znaki 49, 82 (1972).
V. V. Korshak, T. M. Frunze, A. A. Izneev, and T. N. Shishkina, Polym. Sci. U.S.S.R. 6, 992 (1964).
Y. Iwakura, K. Uno, Y. Imai, and M. Fukui, Makromol. Chem. 77, 41 (1964).
G. Rabilloud, B. Sillion, and G. De Gaudemaris, Bull. Soc. Chim. (France) 3, 932 (1966).
J. Horikawa, S. Tammoto, and R. Oda, Chem. High Polym. Japan 24, 501 (1967).
Gh. Mandrie and I. Zugravescu, Rev. Roum. Chim. 16, 1419 (1971).
T. M. Kiseleva, M. M. Koton, N. P. Kuznetsov, Yu. N. Sazanov, and S. N. Nikolaeva, Vysok. Soed. B 15, 514 (1973).
A. A. Iznyeev, Zh. P. Mazurevskay, and V. V. Korshak, Vysok. Soed. B 17, 373 (1975).
V. V. Korshak, A. A. Izyneev, and I. S. Novak, Vysok. Soed. B 17, 229 (1975).
S. Hara and M. Senoo, Japanese Patent No. 74, 26520 (1974).
337. 0. L. Herberts, French Patent No. 1,491,016 (1967).
J. E. Mulvaney and C. S. Marvel, J. Polym. Sci. 50, 541 (1961).
T. Nakajia and C. S. Marvel, J. Polym. Sci. A 1 7, 1295 (1969).
L. W. Breed and J. C. Wiley, J. Polym. Sci., Polym. Chem. Ed. 14, 83 (1976).
H. N. Kovacs, A. D. Delman, and B. B. Simms, J. Polym. Sci. A 1 6, 2103 (1968).
V. I. Kasatochkin, V. V. Korshak, V. V. Kurashev, Z. S. Smutkina, T. M. Frunze, and T. M. Khrenkova, Polym. Sci. U.S.S.R. 7, 1267, (1965).
M. L. Nielsen, U.S. Patent No. 3,330, 805 (1967).
S. Kon-ya and M. Yokayama, Kogaku Daigaku Kenkyu Hogoku 33, 66 (1973).
H. Sivriev and G. Borissov, Eur. Polym. J. 13, 25 (1977).
S. Moon, A. L. Schwartz, and J. K. Hecht, J. Polym. Sci. A 1 8, 3665 (1970).
A. Ya. Yakubovich, R. M. Gitina, E. L. Zaitseva, G. S. Markova, and A. P. Simonov, Polym. Sci. U.S.S.R. 12, 2854 (1970).
R. M. Gitina, E. L. Zaitseva, and A. Ya. Yakubovich, Russ. Chem. Rev. 40, 679 (1971).
V. V. Korshak, G. M. Tseitlin, M. S. Ustinova, M. V. Cherkasov, V. D. Vorob’ev, and B. R. Livshits, U.S.S.R. Patent No. 527,453 (1976). Otkrytiya, Izobret., Prom. Obraztsy, Tovarnye Znaki 53 (33), 78 (1976).
M. B. Sheratte, Nucl. Sci. Abstr. 21, 38848 (1967).
V. V. Korshak, V. V. Vagin, A. A. Izyneev, and N. I. Bekasova, Polym. Sci. U.S.S.R. 17, 2181 (1975).
V. V. Korshak, L. D. Radnaeva, L. G. Komarova, N. I. Bekasova, and A. A. Izyneev, Polym. Sci. U.S.S.R. 18, 2954 (1976).
J. E. Mulvaney, J. J. Bloomfield, and C. S. Marvel, J. Polym. Sci. 62, 59 (1962).
T. Kurosaki and P. R. Young, J. Polym. Sci. C 23, 57 (1966) (published 1968 ).
V. V. Korshak, G. M. Tseitlin, G. M. Cherkasova, and A. L. Rusanov, U.S.S.R. Patent No. 267,065 (1969). Otkrytiya. Izobret. Prom. Obraztsy, Tovarnye Znaki 47, 90 (1970).
N. P. Kuznetsov, M. I. Bessanov, T. M. Kiseleva, and M. M. Koton, Polym. Sci. U.S.S.R. 14, 2282 (1972).
N. A. Adrova, V. N. Bagal, A. M. Dribnova, I. Ya. Kvitko, M. M. Koton, N. P. Kuznetsov, and F. S. Florinskii, Vysok. Soed. B 15, 509 (1973).
M. M. Koton, T. M. Kiseleva, and S. N. Nikolaeva, Vysok. Soed. B 17, 18 (1975).
B. M. Culbertson and S. Dietz, J. Polym. Sci. B 3, 247 (1968).
V. V. Korshak, A. A. Izyneev, G. M. Tseitlin, and A. I. Pavlov, U.S.S.R. Patent No. 221,278 (1969). Otkrytiya, Izobret., Prom. Obraztsy, Tovarnye Znaki 46, 184 (1969).
K. Nagakubo, F. Akutsu, and I. Kunio, Japanese Patent No. 76, 53676 (1976).
R. J. Kray, R. Seltzer, and R. A. E. Winter, Org. Coat. and Plast. Chem. Preprints 31 (1), 569 (1971).
N. Dogoshi, S. Toyama, K. Ikeda, M. Kurihara, and N. Yoda, Japanese Patent No. 69, 20111 (1969).
A. H. Gerber, J. Polym. Sci., Polym. Chem. Ed. 11, 1703 (1973).
J. K. Gillham, Polym. Preprints 7, 513 (1966).
J. K. Gillham, Polym. Eng. Sci. 7, 225 (1967).
F. D. Trischler, K. J. Kjoller, and H. H. Levine, J. Appl. Polym. Sci. 11, 1325 (1967).
I. B. Johns, E. A. McElhill, and E. O. Smith, J. Chem. Eng. Data 6, 87 (1961).
V. V. Korshak, V. V. Rode, and N. M. Kotsoeva, Polym. Sci. U.S.S.R. 17, 1418 (1975).
W. Wrasidlo, Paper presented at Polymer Conference on High Temperature Polymers, Wayne State University, 1968.
D. A. Bochvar, I. V. Stankevich, O. B. Tomilin, E. S. Krongauz, A. P. Travnikova, and V. V. Korshak, Dokl. Akad. Nauk S.S.S.R. 209, 1097 (1973).
W. Wrasidlo and R. Empey, J. Polym. Sci. A 1 15, 1513 (1967).
R. G. Spain and J. D. Ray, Soc. Plast. Eng. (SPE) Conf. on Stability of Plastics,Washington D.C. (1967), pp. El-E14.
W. W. Wright and R. Phillips, J. Polym. Sci. B 2, 47 (1964).
G. P. Shulman and W. Lochte, J. Macromol. Sci. A 1 (3), 413 (1967).
G. F. L. Ehlers and K. R. Fisch, Int. Symp. Polym. Characterization, Appl. Poly. Symp. 8 171 (1969). Proc. 3rd Anal. Conf. 3 187 (1971), published 1972.
P. M. Hergenrother, Proc. High Temp. Polym. Symp.,Western Regional A.C.S. Meeting, Los Angeles (November 1965), p. Dl.
V. V. Rode, N. M. Kotsoeva, G. M. Cherkasova, D. S. Tugushi, G. M. Tseitlin, A. L. Rusanov, and V. V. Korshak, Polym. Sci. U.S.S.R. 12, 2103 (1970).
N. N. Voznesenskaya, V. L. Berendyaev, B. V. Kotov, V. S. Voischev, and A. N. Pravednikov, Vysok. Soed. B 16, 114 (1974).
H. H. Levine, N. P. Loire, and C. B. Delano, AFML Report No. AFML-TR-67–23 (1967).
G. F. L. Ehlers, AFML Report No. AFML-TR-74–177 (1974).
V. I. Kasatochkin, V. V. Korshak, V. V. Kurachev, Z. S. Smutkina, T. M. Frunze, and T. M. Khrenkova, Dokl. Akad. Nauk S.S.S.R. 159, 843 (1964).
Y. Tsur, Y. L. Freilich, and M. Levy, J. Polym. Sci., Polym. Chem. Ed. 12, 1531 (1974).
R. Yokata, I. Mita, and H. Kambe, Kob. Kagaku. 29, 428 (1972).
V. V. Korshak, N. M. Kotsoeva, and V. V. Rode, Dokl. Akad. Nauk S.S.S.R. 209, 356 (1973).
T. M. Frunze, V. V. Korshak, A. A. Izyneev, and V. V. Kurachev, Polym. Sci. U.S.S.R. 7, 308 (1965).
W. W. Wright, in Degradation and Stabilization of Polymers, G. Geuskens, (ed.), Applied Science Publishers, London (1975), p. 43.
J. Preston and W. B. Black, J. Polym. Sci. A 1 5, 2429 (1967).
G. F. L. Ehlers, K. R. Fisch, and W. R. Powell, AFML Report No. AFML-TR-70–63 (1970). J. Polym. Sci. A 1, 2931 (1969).
H. L. Freeman, AFML Report No. AFML-TDR-64–274 (1965).
R. A. Gauchana and R. T. Conley, J. Macromol. Sci., Chem. A 4, 441 and 1599 (1970).
R. T. Conley, S. Ghosh, and J. J. Kane, Org. Coat and Plast. Chem. Preprints 31 (1), 151 (1971).
G. Dubey and J. J. Kane, Org. Coat and Plast. Chem. Preprints 30 (2), 187 (1970).
V. K. Belyakov, I. V. Belyakova, M. V. Kozlova, P. A. Okunev, and O. G. Tarakanov, Polym. Sci. U.S.S.R. 15, 2990 (1973).
R. B. Gosnell and H. H. Levine, J. Macromol. Sci. Chem. A 3, 1381 (1969).
Anon. Narmco Imidite 850 Data Sheet.
R. Poet,Proc. 20th Ann. Tech. Conf. Reinf. Plast.lComp. Inst. Soc. Plast. Ind. (1965), Sect. 6-E.
H. H. Levine, Report ASD-TDR-63–396 (1962), pp. 56–58.
R. Reed and T. J. Reinhart, Proc. 21st Ann. Tech. Conf. Reinf. Plast.lComp. Inst. Soc. Plast. Ind. (1966), Sect. 7-B.
J. D. Ray, Proc. 24th Ann. Tech. Conf. Reinf. Plast. Comp. Inst. Soc. Plast. Ind. (1969), Sec. 15-E.
E. B. Bahnsen and L. E. Shoff, 12th Nat. SAMPE Symp. Exhib. 12, 1 (1967).
F. J. Rid and S. Litvak, 12th Nat. SAMPE Symp. Exhib. 12, 15 (1967).
H. A. Mackay, Mod. Plast. 1, 149 (1966).
R. Reed and R. Hidde, Report AFML-TR-136 (1965) AFML-TR-65-I46, Vols. 1 and 2 (1965).
E. L. Strauss, Polym. Eng. Sci. 61, 24 (1966).
A. H. Frazer, High Temperature Resistant Polymers, Wiley-Interscience, New York (1968), pp. 290–292.
R. R. Dickey, J. H. Lundell, and J. A. Parker, J. Macromol. Sci. Chem. A 3, 573 (1969).
Whittaker Corp., Narmco Division, Imidite 850 Adhesive Product Information (July 1964).
V. V. Korshak, T. M. Frunze, and A. A. Izyneev, Ref. Zhur. Khim., Abstr. No. 125, 412 (1967).
S. Litvak, Adhes. Age 11(1), 17 (1968); 11 (2), 24 (1968).
P. Giuliani, Les Hauts Polymères Thermostables, Publications de L’Institut Français du Pétrole, Paris (1971), p. 79.
J. R. Hill, Adhes. Age 9 (8), 32 (1966).
H. H. Levine, 9th Nat. SAMPE Symp. 9, V - 1 (1965).
R. B. Krieger and R. E. Politi, 9th Nat. SAMPE Symp. 9, V - 4 (1965).
H. A. King, Adhes. Age 15 (2), 22 (1972).
D. G. Horn, A. L. Speece, and G. A. Schmidt, Polym. Chem. Preprints 8 (2), 1190 (1967).
S. Y. Yoshino, M. A. Nadler, and D. H. Richter, Adhes. Age 10 (8), 26 (1967).
R. Kanter and S. Litvak, Adhes. Age 12 (11), 24 (1969).
T. J. Reinhart and R. Hidde, Appl. Polym. Symp. 3, 299 (1966).
S. V. Messineo, Hawthorne, and S. Y. Yoshimo, U.S. Patent No. 3, 549, 468 (1970).
S. B. Twiss, Appl. Polym. Symp. 3, 455 (1966).
R. O. Denyes, Report AFML-TR-66–167, Vols. I and I I (1966).
J. H. Ross, Amer. Dyestuff Reporter 51 (20), 29 (1962).
J. H. Ross, Text. Res. J. 32, 768 (1962).
R. Spain and L. G. Picklesimer, Text. Res. J. 36, 619 (1966).
J. G. Santangelo, U.S. Patent No. 3,441, 640 (1964).
R. Dauskys, U.S. Patent No. 3,856, 549 (1974).
K. A. Rinehart, E. J. Powers, G. W. Calundann, and C. P. Driscoll, Report ASD-TR-73–49 (1974).
R. W. Singleton, Appl. Polym. Symp. 9, 133 (1969).
R. W. Singleton, H. O. Noether, and J. F. Tracy, J. Polym. Sci. C 19, 65 (1967).
R. M. Stanton and R. S. Schulman, Report AFML-TR-72–139 (1972).
J. H. Ross, R. S. Schulman, and R. M. Stanton, Text. Res. J. 4, 146 (1971).
L. R. Belohlav, Angew. Macromol. Chem. 40/41, 465 (1974).
R. M. Stanton, Report ASD-TR-73–27 (1973).
J. H. Ross, 19th Nat. SAMPE Symp. 19, 166 (1974).
R. H. Jackson, Text. Res. J. 48, 314 (1978).
W. D. Freeston, J. S. Panto, L. Barish, and M. M. Schoppee, Report AFML-TR-70–267 (1970).
H. M. Ezekiel, Org. Coat and Plast. Chem. Preprints 31 (1), 415 (1971).
H. M. Ezekiel and R. G. Spain, U.S. Patent No. 3,528, 774 (1967).
D. E. Stuetz, Org. Coat. and Plast. Chem Preprints 31 (1), 389 (1971).
H. Yokata, K. Kobayashi, and J. Harikawa, Japanese Patent No. 74, 54629 (1974).
D. A. Kourtides, J. A. Parker, and C. L. Segal, Soc. Plast. Eng. 32, 580 (1974).
C. L. Segal, 19th Nat. SAMPE Symp. 19, 51 (1974).
Whittaker Corp., Narmco Division, Prod. Eng. 38 (18), 95 (1967).
R. Reed and J. Feher, AIAAIASME Struct., Struct. Dgn. Mater. Conf., Collect. Tech. Pap. Mater. 9 (1968), pp. 1–6.
Supplementary Bibliography
Aromatic imide polymers for high-temperature adhesives, H. A. Burgman, J. H. Freeman, L. W. Frost, G. M. Bower, E. J. Traynor, and C. R. Ruffing, J. Appl. Polym. Sci. 12 805 (1968). Effect of long-term oxidation at 200–300°C on six types of aromatic amide and imide resins, L. C.
Scala, W. M. Hickam, and I. Marschik, J. Appl. Polym. Sci. 12, 2339 (1968).
Heat resistant polyamides and polyimides for electrical insulation, J. A. Almouli and P. F. Bruins, Plast. Elec. Insul. 155 (1968).
Polyimides. A new class of heat resistant polymers, N.A. Androva, M. I. Bessonov, L. A. Laius, and A. P. Rudakov, Israel Program for Scientific Translations, Jerusalem (1969).
Polyimide manufacture, M. W. Ramey, Chem. Progr. Rev., Vol. 54, Noyes Data Corp., New Jersey (1969).
Polyimides, J. Preston, in Encyclopedia of Chemical Technology, Suppl. Vol., 2nd ed., H. F. Mark, J. J. McKetta, and D. F. Othmer, (eds.), Interscience Publishers, New York (1971).
Engineers guide to polyimide plastics, R. J. Falian, Mater. Eng. 74 (2), 26 (1971).
Chemistry and kinetics of polyimide degradation, C. Arnold and L. K. Burgman, Ind. Eng. Chem. Prod. Res. Develop. 11, 322 (1972).
Future prospects in the field of aromatic polyimides (polyarimides) and their derivatives, M. M. Koton, Polym. Sci. U.S.S.R. 16, 1383 (1974).
Mechanism of formation and degradation of polyimides, P. P. Nechaev, Y. S. Vygodskii, G. E. Zaikov, and S. V. Vinogradova, Polym. Sci. U.S.S.R. 18, 1903 (1976).
Polyimides, C. E. Sroog, J. Polym. Sci. Macromol. Rev. 11, 161 (1976).
When, where and how to use polymides, J. D. Hensel, Plastics Eng. 33 (10), 20 (1977).
Polyimides take the heat, J. A. Vaccari, Prod. Eng. 49, 41 (1978).
How to process the new thermoplastic polyimides, Anon., Plast. Technol. 25 (8), 23 (1979).
S. V. Vinogradova, Y. S. Vygodskii, V. V. Korshak, and T. N. Spirins, Acta. Polym. 30, 3 (1979).
Polybenzimidazoles. A review, J. R. Hall and D. W. Levi, Plastec Report No. 28 (1966). Polybenzimidazoles, H. H. Levine, in Encyclopedia of Polymer Science and Technology, H. F.
Mark, N. Gaylord, and N. M. Bikales, (eds.), Interscience Publishers, New York (1969), Vol. 11, p. 188.
Polybenzimidazoles, J. R. Leal, Mod. Plast. 52 (8), 60 (1975).
Heteroatom ring containing polymers, A. D. Delman, J. Macromol. Sci. (Rev. Macromol. Chem.) C 2, 153 (1968).
Thermal stability of polyheteroarylenes, E. M. Bondarenko, V. V. Rode, and V. V. Korshak, Usp. Khim. Fiz. Polym. 206 (1970).
Synthesis methods and properties of polyazoles, V. V. Korshak and M. M. Teplyakov, J. Macromol. Sci. (Rev. Macromol. Chem.) C 5, 409 (1971).
The heat resistance of polyheteroarylenes, V. K. Belyakov, I. V. Belyakova, S. S. Medved, A. F. Yerin, V. A. Kosobutskii, V. M. Savinov, and L. B. Sokolov, Polym. Sci. U.S.S.R. 13, 1956 (1971).
New synthetic routes to high temperature polymers by cyclopolycondensation reactions, N. Yoda, M. Kurihara, and N. Dokoshi, Progr. Polym. Sci. Japan 4, 1 (1972).
New aspects of polycyclization, E. S. Krongauz, Russ. Chem. Rev. 42, 857 (1973).
Thermally stable heterocyclic polymers as adhesives, M. G. Maximovich, in Handbook of Adhesives Bonding,C. V. Cagel, (ed.), McGraw-Hill, New York (1973), p. 5/1.
Synthesis of polymers by polycyclotrimerization, V. A. Sergeev, V. K. Shitikov, and V. A. Pankratov, Russ. Chem. Rev. 48, 79 (1979).
Thermally stable polymers: Polyoxadiazoles, polyoxadiazole-N-oxides, polythiazoles and polythiadiazoles, P. E. Cassidy and N. C. Fawcett, J. Macromol. Sci. (Rev. Macromol. Chem.) C 17, 209 (1979).
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1983 Springer Science+Business Media New York
About this chapter
Cite this chapter
Critchley, J.P., Knight, G.J., Wright, W.W. (1983). Polymers with Heterocyclic Rings in the Chain. In: Heat-Resistant Polymers. Springer, Boston, MA. https://doi.org/10.1007/978-1-4899-0396-9_5
Download citation
DOI: https://doi.org/10.1007/978-1-4899-0396-9_5
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4899-0398-3
Online ISBN: 978-1-4899-0396-9
eBook Packages: Springer Book Archive